Download or read book Advanced Materials and Structural Engineering written by Jong Wan Hu and published by CRC Press. This book was released on 2016-02-03 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ICAMEST 2015 Conference covered new developments in advanced materials and engineering structural technology. Applications in civil, mechanical, industrial and material science are covered in this book. Providing high-quality, scholarly research, addressing developments, applications and implications in the field of structural health monitoring, construction safety and management, sensors and measurements. This volume contains new models for nonlinear structural analysis and applications of modeling identification. Furthermore, advanced chemical materials are discussed with applications in mechanical and civil engineering and for the maintenance of new materials. In addition, a new system of pressure regulating and water conveyance based on small and middle hydropower stations is discussed. An experimental investigation of the ultimate strength and behavior of the three types of steel tubular K-joints was presented. Furthermore, real-time and frequency linear and nonlinear modeling performance of materials of structures contents were concluded with the notion of a fully brittle material, and this approach is implemented in the book by outlining a finite-element method for the prediction of the construction performance and cracking patterns of arbitrary structural concrete forms. This book is an ideal reference for practicing engineers in material, mechanical and civil engineering and consultants (design, construction, maintenance), and can also be used as a reference for students in mechanical and civil engineering courses.
Download or read book New Trends and Applications of Computer aided Material and Engineering written by Wen Ya Tian and published by Trans Tech Publications Ltd. This book was released on 2011-01-11 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 International Conference on Computer-aided Material and Engineering (ICCME 2011), March 9-11, 2011, Hangzhou, China
Download or read book Computer Aided Tissue Engineering written by Michael A.K. Liebschner and published by Humana Press. This book was released on 2012-06-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent revolution in the biological sciences and bioengineering, along with the advancements of modern design and manufacturing, biomaterials, biology, and biomedicine, have brought about the new field of computer-aided tissue engineering. Advances in this fascinating new area of study encompass broad applications in large-scale tissue engineering fabrication, artificial organs, orthopaedic implants, and biological chips. Computer-Aided Tissue Engineering highlights the interdisciplinary nature of this topic and reviews the current state of computer-aided three-dimensional tissue modeling, tissue classification, and tissue fabrication and implantation. Particular focus is placed on rapid prototyping and direct digital fabrication for cell and organs, construction of tissue analogs, and precursors to 3D tissue scaffolds. Written for the highly successful Methods in Molecular BiologyTM series, this work provides the kind of detailed description and implementation advice that is crucial for getting optimal results. Current and practical, Computer-Aided Tissue Engineering provides a coherent framework for researchers interested in these vital technologies and for clinicians who plan to implement them.
Download or read book Advances in CAD CAM CAE Technologies written by Panagiotis Kyratsis and published by MDPI. This book was released on 2020-05-27 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD/CAM/CAE technologies find more and more applications in today’s industries, e.g., in the automotive, aerospace, and naval sectors. These technologies increase the productivity of engineers and researchers to a great extent, while at the same time allowing their research activities to achieve higher levels of performance. A number of difficult-to-perform design and manufacturing processes can be simulated using more methodologies available, i.e., experimental work combined with statistical tools (regression analysis, analysis of variance, Taguchi methodology, deep learning), finite element analysis applied early enough at the design cycle, CAD-based tools for design optimizations, CAM-based tools for machining optimizations.
Download or read book Integrated Computer Aided Design in Automotive Development written by Hirz Mario and published by Springer Science & Business Media. This book was released on 2013-06-22 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces constant pressure to reduce development costs and time while still increasing vehicle quality. To meet this challenge, engineers and researchers in both science and industry are developing effective strategies and flexible tools by enhancing and further integrating powerful, computer-aided design technology. This book provides a valuable overview of the development tools and methods of today and tomorrow. It is targeted not only towards professional project and design engineers, but also to students and to anyone who is interested in state-of-the-art computer-aided development. The book begins with an overview of automotive development processes and the principles of virtual product development. Focusing on computer-aided design, a comprehensive outline of the fundamentals of geometry representation provides a deeper insight into the mathematical techniques used to describe and model geometrical elements. The book then explores the link between the demands of integrated design processes and efficient data management. Within automotive development, the management of knowledge and engineering data plays a crucial role. Some selected representative applications provide insight into the complex interactions between computer-aided design, knowledge-based engineering and data management and highlight some of the important methods currently emerging in the field.
Download or read book Trends in Computer Aided Innovation written by Noel León-Rovira and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Innovation (CAI) is a young domain, the goal of which is to support enterprises throughout the complete innovation process. This comprehensive book presents the most up-to-date research on CAI. It addresses the main motivations of the industrial sector regarding the engineering innovation activity with computer tools and methods. The book also discusses organizational, technological and cognitive aspects of the application of CAI methods and tools.
Download or read book Recent Advances in Manufacturing Engineering and Processes written by Ramesh K. Agarwal and published by Springer Nature. This book was released on 2021-10-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.
Download or read book Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices written by Andrés Díaz Lantada and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decades have seen remarkable advances in computer‐aided design, engineering and manufacturing technologies, multi‐variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and results in the medical world, dramatically improving diagnoses and therapies for all kinds of pathologies. But if these biodevices are to fulfill present expectations, today’s engineers need a thorough grounding in related simulation, design and manufacturing technologies, and collaboration between experts of different areas has to be promoted, as is also analyzed within this handbook.
Download or read book Recent Trends in Processing and Degradation of Aluminium Alloys written by Zaki Ahmad and published by BoD – Books on Demand. This book was released on 2011-11-21 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent decade a quantum leap has been made in production of aluminum alloys and new techniques of casting, forming, welding and surface modification have been evolved to improve the structural integrity of aluminum alloys. This book covers the essential need for the industrial and academic communities for update information. It would also be useful for entrepreneurs technocrats and all those interested in the production and the application of aluminum alloys and strategic structures. It would also help the instructors at senior and graduate level to support their text.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1983 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICTs for Advancing Rural Communities and Human Development Addressing the Digital Divide written by Chhabra, Susheel and published by IGI Global. This book was released on 2012-01-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book reviews the important impact ICTs have on economic, social, and political development and provides analyses of ICTs for education, commerce, and governance"--Provided by publisher.
Download or read book NASA SP 7500 written by United States. National Aeronautics and Space Administration and published by . This book was released on 1982 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management written by and published by . This book was released on 1983 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Techniques for Engineering Analysis and Design written by G.N. Pande and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods and related computer based algorithms form the logical solution for. many complex problems encountered in science and engineering. Although numerical techniques are now well established, they have continued to expand and diversify, particularly in the fields of engineering analysis and design. Various engineering departments in the University College of Swansea, in particular, Civil, Chemical, Electrical and Computer Science, have groups working in these areas. It is from this mutual interest that the NUMETA conference series was conceived with the main objective of providing a link between engineers developing new numerical techniques and those applying them in practice. Encouraged by the success of NUMETA '85, the second conference, NUMETA '87, was held at Swansea, 6-10 July 1987. Over two hundred and twenty abstracts were submitted for consideration together with a number of invited papers from experts in the field of numerical methods. The final selection of contributed and invited papers were of a high quality and have culminated in the two volumes which form these proceedings. This volume contains papers on the themes of 'Numerical Techniques for Engineering Analysis and Design' and 'Developments in Engineering Software'. Many new developments on a wide variety of topics have been reported and these proceedings contain a wealth of information and references which we believe will be of great interest to theoreticians and practising engineers alike.
Download or read book Numerical Methods in Mechanics of Materials written by Ken P. Chong and published by CRC Press. This book was released on 2017-11-27 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the dynamic digital age, the widespread use of computers has transformed engineering and science. A realistic and successful solution of an engineering problem usually begins with an accurate physical model of the problem and a proper understanding of the assumptions employed. With computers and appropriate software we can model and analyze complex physical systems and problems. However, efficient and accurate use of numerical results obtained from computer programs requires considerable background and advanced working knowledge to avoid blunders and the blind acceptance of computer results. This book provides the background and knowledge necessary to avoid these pitfalls, especially the most commonly used numerical methods employed in the solution of physical problems. It offers an in-depth presentation of the numerical methods for scales from nano to macro in nine self-contained chapters with extensive problems and up-to-date references, covering: Trends and new developments in simulation and computation Weighted residuals methods Finite difference methods Finite element methods Finite strip/layer/prism methods Boundary element methods Meshless methods Molecular dynamics Multiphysics problems Multiscale methods
Download or read book Transdisciplinary Engineering for Complex Socio technical Systems Real life Applications written by J. Pokojski and published by IOS Press. This book was released on 2020-10-20 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transdisciplinary engineering transcends other inter- and multi-disciplinary ways of working, such as Concurrent Engineering (CE). In particular, transdisciplinary processes are aimed at solving complex, ill-defined problems, or problems for which the solution is not immediately obvious. No one discipline or single person can provide sufficient knowledge to solve such problems, so collaboration is essential. This book presents the proceedings of the 27th ISTE International Conference on Transdisciplinary Engineering, organized by Warsaw University of Technology, Poland, from 1-10 July 2020. ISTE2020 was the first of this conference series to be held virtually, due to the COVID-19 restrictions. Entitled Transdisciplinary Engineering for Complex Socio-technical Systems - Real-life Applications, the book includes 71 peer-reviewed papers presented at the conference by authors from 17 countries. These range from theoretical and conceptual to strongly pragmatic and addressing industrial best practice and, together with invited talks, they have been collated into 9 sections: Transdisciplinary Engineering (7 papers); Transdisciplinary Engineering Education (4 papers); Industry 4.0, Methods and Tools (7 papers); Human-centered Design (8 papers); Methods and Tools for Design and Production (14 papers); Product and Process Development (9 papers); Knowledge and Data Modeling (13 papers); Business Process and Supply Chain Management (7 papers); and Sustainability (2 papers). The book provides an overview of new approaches, methods, tools and their applications, as well as current research and development, and will be of interest to researchers, design practitioners, and educators working in the field.
Download or read book Computer Aided Fixture Design written by Yiming (Kevin) Rong and published by CRC Press. This book was released on 1999-04-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates recently developed fixture design and verification technology, focusing on their central role in manufacturing processes. The text uses up-to-date computer technology to minimize costs, increase productivity and assure product quality. It presents advanced data and analysis that is directly applicable to development of comprehensive com
