Download or read book New Techniques for Characterizing Corrosion and Stress Corrosion written by Russell H. Jones and published by Metallurgical Society of Aime. This book was released on 1996 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in the fields of surface science, materials science, corrosion and electrochemistry should find this volume to be a useful reference source on recent developments and techniques in the study and understanding of corrosion and stress corrosion. The 21 papers are organized into the following topics: analytical, theoretical and computational, crack growth and electrochemical.

Download or read book New Techniques for Characterizing Corrosion and Stress Corrosion written by Minerals, Metals and Materials Society. Fall Meeting and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stress corrosion Cracking written by Russell H. Jones and published by ASM International(OH). This book was released on 1992 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the many conditions under which stress-corrosion cracking (SCC) can occur, the parameters which control SCC, and the methodologies for mitigating and testing for SCC, plus information on mechanisms of SCC with experimental data on a variety of materials. Contains information about environmen

Download or read book Development of Multi scale Characterization Techniques for Stress Corrosion Cracking of Aerospace Alloys written by Nicholas Reed and published by . This book was released on 2021 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion presents an inherent challenge in the safe and effective use of metallic aerospace structures for extended periods of time. Progress in the fundamental understanding of corrosion initiation and propagation under stress requires a multi-scale approach that leverages experiments to develop predictive models. Although there exists a large amount of research results tracking the corrosive processes of anodic dissolution and hydrogen embrittlement, the amount of available data and modeling of the micro-scale initiation of corrosion is sparse. This work leverages a suite of characterization techniques to systematically analyze an aerospace grade aluminum alloy AA7075-T6, providing important multi-scale data for correlation with overall corrosion progression. Samples were exposed to 3.5% NaCl solution at various exposure times under loading with a micro-tensile system. Optical microscopy, Raman spectroscopy and Energy Dispersive X-ray Analysis provided spatial maps of the visual and chemical alloy signatures before, during, and after failure, to analyze and track the progression of corrosion. An experimental setup for in-situ Digital Image Correlation (DIC) was developed to provide strain maps to study local concentrations around corrosion pits and quantify the impact on the material tensile performance. The material morphology and composition from these measurements identified localized oxide formations at a high spatial resolution that can be used to quantify the corrosion rates. Meanwhile, in-situ DIC measurements provided results showing stress concentrations formed by the corrosion pits and the reduced mechanical performance with exposure. The results demonstrate that multiple factors affect corrosion susceptibility and material deterioration, and highlight the need to overcome experimental challenges in quantifying these factors distinctly. This work demonstrates the capacity for highly detailed analysis of corrosion initiation and propagation in affected alloys using the processes outlined in the systematic study. The outcomes provide a pathway to address methods for maintaining the integrity of these alloys and extending their lifespan.

Download or read book Corrosion and Protection of Materials written by Marina Cabrini and published by MDPI. This book was released on 2021-04-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty articles on various topics related to the corrosion and protection of metallic materials. This topic is of strong actuality both due to the aging of plants and infrastructures that require checks and maintenance, and to the use of traditional materials in increasingly aggressive environments, added to the need of changing the current anti-corrosion systems with less environmental impact methods. Finally, the new development of innovative materials, such as additive manufacturing or high-entropy alloys, needs the characterization of their corrosion behavior. In this issue, there are works on new alloys obtained for additive manufacturing or high entropy, on the study of corrosion and stress corrosion cracking and hydrogen embrittlement mechanisms, through electrochemical and microscopical techniques, studies on low environmental impact inhibitors and biocides, as well as ceramic and metal protective coatings. Finally, there are works on the study of the residual mechanical resistance of corroded infrastructures and on monitoring and non-destructive control. In this way, the book therefore offers a somewhat varied panorama of research trends in the field.

Download or read book Recent Developments in Analytical Techniques for Corrosion Research written by Ihsan ulhaq Toor and published by Springer Nature. This book was released on 2022-01-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of advanced analytical tools, from electrochemical to in-situ/ex-situ material characterization techniques, as well as the modeling of corrosion systems to foster understanding and prediction. When used properly, these tools can enrich our understanding of material performance (metallic materials, coatings, inhibitors) in various environments/contexts (aqueous corrosion, high-temperature corrosion). The book encourages researchers to develop new corrosion-resistant materials and supports them in devising suitable asset integrity strategies. Offering a valuable resource for researchers, industry professionals, and graduate students alike, the book shows them how to apply these valuable analytical tools in their work.

Download or read book Crystallographic Characterization of Transgranular Stress Corrosion Cracking of Face Centered Cubic Metals and Alloys written by Efstathios Ioannis Meletis and published by . This book was released on 1981 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.

Download or read book Stress Corrosion Cracking written by G. M. Ugiansky and published by ASTM International. This book was released on 1979 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.

Download or read book Stress corrosion Cracking Characterization of High strength Steels base Metals and Weldments written by Charles Tatsumi Fujii and published by . This book was released on 1978 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the results of studies on the effects of compositional, metallurigical, and microstructural factors on the SCC behavior of high-strength steels and weldments. The primary materials were quench-and-tempered steels or weldments in the HY-130 and HY-180 systems with complex martensitic microstructures. The cantilever beam method was used to establish the materials' SCC characteristics. These characteristics, complemented by fractographic and metallorgraphic examinations, identified potential pathways for improving weldment properties. The influence of processing, welding, and heat treating on microstructures, and correlations of the latter with SCC behavior and fracture modes, were examined. (Author).

Download or read book Determination of Damage Initiation Mechanisms in Aerospace Alloys Due to Stress Corrosion Cracking Via In situ Microscale Characterization Techniques written by Remelisa P. Esteves and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum alloys are used on aerospace vehicles due to their high strength-to-weight ratio, formability and machinability. However, they become vulnerable to stress corrosion cracking (SCC) during their service life.SCC is primarily caused by the material’s stress condition, a suitable corrosive environment and material susceptibility. It is also influenced by a mixture of electrochemical, mechanical, and chemical factors. Due to the complexity of SCC, tools with better resolution and sensitivity are needed to better understand the impact and interaction of the contributing factors. A vast amount of research has been done to study SCC behavior, but the scale of characterization must be reduced to elucidate the key initiation mechanisms. In this work, it is shown that SCC initiation was detected early via micro-digital image correlation (micro-DIC) prior to the crack being discernible in microscopy images. The initial effort to monitor stress corrosion cracking in AA7075-T6 involved using a pixel resolution of 3.825 microns/pixel, frame rate of 10-15 min/image and an airbrush nozzle diameter of 0.3 mm for the speckle pattern, which led to the detection of crack initiation at 98% failure load. By using a pixel resolution that is 6 times smaller, a frame rate of up to 60 times less time per image, and an airbrush nozzle that is 2 times smaller, the first observation of strain concentration marking the eventual failure region of the AA7075-T6 sample was detected as early as 58% failure load. When the micro-DIC technique was applied to study SCC behavior in additively manufactured AlSi10Mg, the first observation of localized strain marking the eventual failure region of the sample was detected at 78% failure load. X-ray synchrotron tomography was used to qualitatively assess the hydrogen bubble and precipitate formation and to quantitatively assess the post initiation crack growth in AA7075-T651. With improved micro-DIC parameters and correlation with experimental outcomes from x-ray synchrotron tomography, multiple factors contributing to SCC can be assessed to better understand the mechanisms of SCC initiation. Correlations of material exposure time and load with SCC initiation can provide data for developing corrosion control strategies and new and improved alloys or heat treatment, as well as understanding SCC behavior in alloys made through unconventional means, such as additive manufacturing. The impact of this work lies in the life extension of alloys and greater reusability and fatigue life extension of aerospace vehicles.

Download or read book Cold Work Level Analysis and Evaluation of Characterization Methods in Austenitic Stainless Steel for Stress Corrosion Cracking Applications written by Helen Christina Smith and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress corrosion cracking behavior is a matter of concern for structural materials, namely stainless steels and nickel alloys, in nuclear power plants. High levels of cold work have been shown to both reduce crack initiation times and increase crack growth rates. Cold working has numerous effects on a material, including changes in microstructure, mechanical properties, and residual stress state, yet is typically reported as a simple percent change in geometry. There is need to develop a strategy for quantitative assessment of cold work level in order to better understand stress corrosion cracking test data. Six assessment methods commonly performed alongside stress corrosion cracking testing- optical microscopy, electron backscatter diffraction, x-ray diffraction, tensile testing, hardness testing, and residual stress measurement- are evaluated with respect to their ability to quantify the level of cold work in a component. The test material is stainless steel 316L plate that has been cold-rolled to three conditions: 0%, 20%, and 30%. Measurement results for each assessment method include correlation with cold work condition and repeatability data. Measured values showed significant spatial variation, illustrating that cold work level is not uniform throughout a component. Mechanical properties (tensile testing, hardness) were found to correlate most linearly with cold work condition. Significant residual stresses were observed in all three orthogonal directions. General suggestions for a cold work characterization methodology are provided.

Download or read book Stress Corrosion Cracking of Pipelines written by Y. Frank Cheng and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains why pipeline stress corrosion cracking happens and how it can be prevented Pipelines sit at the heart of the global economy. When they are in good working order, they deliver fuel to meet the ever-growing demand for energy around the world. When they fail due to stress corrosion cracking, they can wreak environmental havoc. This book skillfully explains the fundamental science and engineering of pipeline stress corrosion cracking based on the latest research findings and actual case histories. The author explains how and why pipelines fall prey to stress corrosion cracking and then offers tested and proven strategies for preventing, detecting, and monitoring it in order to prevent pipeline failure. Stress Corrosion Cracking of Pipelines begins with a brief introduction and then explores general principals of stress corrosion cracking, including two detailed case studies of pipeline failure. Next, the author covers: Near-neutral pH stress corrosion cracking of pipelines High pH stress corrosion cracking of pipelines Stress corrosion cracking of pipelines in acidic soil environments Stress corrosion cracking at pipeline welds Stress corrosion cracking of high-strength pipeline steels The final chapter is dedicated to effective management and mitigation of pipeline stress corrosion cracking. Throughout the book, the author develops a number of theoretical models and concepts based on advanced microscopic electrochemical measurements to help readers better understand the occurrence of stress corrosion cracking. By examining all aspects of pipeline stress corrosion cracking—the causes, mechanisms, and management strategies—this book enables engineers to construct better pipelines and then maintain and monitor them to ensure safe, reliable energy supplies for the world.

Download or read book New Challenges and Industrial Applications for Corrosion Prevention and Control written by El Kacimi, Younes and published by IGI Global. This book was released on 2020-06-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are used at an extremely high rate in the industrial and manufacturing fields. Exemplary properties including strength and ductility have made this material highly dynamic; however, the risk of corrosion remains a vital issue. The study of corrosion prevention has attracted interest from researchers and professionals as new technologies are emerging that can assist in the prevention of material destruction. However, research is lacking on the application of these protective technologies within specific fields. New Challenges and Industrial Applications for Corrosion Prevention and Control provides emerging research exploring the theoretical and practical aspects of protective methods against corrosion and the implementation of these techniques within a wide span of professional disciplines. Featuring coverage on a broad range of topics such as molecular modeling, surface treatments, and biomaterials, this book is ideally designed for engineers, industrial chemists, material scientists, researchers, engineers, academicians, practitioners, and students seeking current research on the technological advancements in corrosion protection in various professional scopes.

Download or read book Environmentally Assisted Cracking written by R. D. Kane and published by ASTM International. This book was released on 2000 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The November 2000 symposium addressed methodologies for evaluation of environmental assisted cracking (EAC) in equipment and structures exposed to corrosive environments, and recent developments in the generation of relevant materials properties data based on laboratory tests. Twenty-seven papers fr

Download or read book Corrosion Inspection and Monitoring written by Pierre R. Roberge and published by John Wiley & Sons. This book was released on 2007-02-09 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference on modern techniques and methods for monitoring and inspecting corrosion Strategic corrosion inspection and monitoring can improve asset management and life cycle assessment and optimize operational budgets. Advances in computer technologies and electronics have led to very efficient tools for monitoring and inspecting corrosion, including impedance spectroscopy, electrical field signatures, acoustic emissions, and radiographs. This up-to-date reference explains both intrusive and non-intrusive methods of measuring corrosion rates. It covers: The impact of corrosion on the economy and the safe operation of systems in diverse operational environments The various forms of corrosion, with a focus on the detectability of corrosion damage in the real world The principles of risk-based inspection and various risk assessment methodologies (HAZOP, FMECA, FTA, and ETA), with examples from industry The monitoring of microbiologically induced corrosion (MIC), cathodic protection (CP) systems, and atmospheric corrosion Non-destructive evaluation (NDE) techniques, including visual, ultrasonic, radiographic, electromagnetic, and thermographic inspection Roadmaps used by various industries and organizations for carrying out complex inspection and monitoring schedules Complete with graphics and illustrations, this is the definitive reference for professionals involved in the maintenance of industrial systems and structures, from oil exploration to chemical plants and infrastructures; consultants; property managers; and civil, materials, and construction engineers.