Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1994-11-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5 "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by CRC Press. This book was released on 1989-10-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Polymer Blends written by D.R. Paul and published by Elsevier. This book was released on 2012-12-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Blends, Volume 2 aims to show the importance of mixed polymer systems as a major branch of macromolecular science and provides a broad background of principles and practices in this field. Starting from where the first volume left off, the book covers topics in the area of polymer blends in Chapters 11-23. Areas of coverage include interpenetrating polymer networks; interfacial agents for polymer blends; rubber modification of plastics; fracture phenomena; coextruded multilayer polymer films and sheets; polymeric plasticizers; and polyolefin blends and their applications. The book is recommended for scientists, technologists, and engineers in the academe, research, and related industry, especially those who wish to be updated with its advances as a science.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Advances in Polymer Materials and Technology written by Anandhan Srinivasan and published by CRC Press. This book was released on 2016-08-19 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancements in the field of polymer science and technology. Frontiers areas, such as polymers based on bio-sources, polymer based ferroelectrics, polymer nanocomposites for capacitors, food packaging and electronic packaging, piezoelectric sensors, polymers from renewable resources, superhydrophobic materials and electrospinning are topics of discussion. The contributors to this book are expert researchers from various academic institutes and industries from around the world.
Download or read book Polymer Thermodynamics written by Kal Renganathan Sharma and published by CRC Press. This book was released on 2011-10-10 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Thermodynamics: Blends, Copolymers and Reversible Polymerization describes the thermodynamic basis for miscibility as well as the mathematical models used to predict the compositional window of miscibility and construct temperature versus volume-fraction phase diagrams. The book covers the binary interaction model, the solubility parameter
Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. - Provides an integrated view on how to modify polymer properties - Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic - Includes the optimization of properties using gradients in polymers composition or structure
Download or read book Compatibilization of Polymer Blends written by Ajitha A. R and published by Elsevier. This book was released on 2019-10-10 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization and Properties offers a comprehensive approach to the use of compatibilizers in polymer blends, examining both fundamental and advanced knowledge in the field. The book begins by introducing polymer blends, describing thermodynamics, miscibility, and phase separation, and explaining the main concepts of compatibilization. Other sections cover theoretical approaches for nearly compatible blends, incompatible blends, nanofillers, physical compatibilization, reactive compatibilization, morphological and structural characterization, and physico-mechanical characterization. Finally, key application areas are covered, including biomedical applications, packaging and automobile engineering. While this book will be a highly valuable reference source for academics, researchers and postgraduate students interested in polymer blends, it will also be ideal for anyone involved in the fields of polymer science, polymer chemistry, polymer physics, materials science, scientists, R&D professionals, and engineers in involved in the development or engineering of polymer products. - Offers detailed and systematic coverage of essential and advanced topics relating to the compatibilization of polymer blends - Presents a critical analysis of the effect of compatibilization on morphology and thermal, mechanical, electrical and viscoelastic properties of polymer blends - Draws on novel studies and state-of-the-art research, discussing the latest issues and developments
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Advances in Engineering Fluid Mechanics Multiphase Reactor and Polymerization System Hydr written by Nicholas P Cheremisinoff and published by Elsevier. This book was released on 1996-08-27 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Advances in Engineering Fluid Mechanics Series covers topics in hydrodynamics related to polymerization of elastomers and plastics. Emphasis is given to advanced concepts in multiphase reactor systems often used in the manufacturing of products. This volume is comprised of 30 chapters that address key subject areas such as multiphase mixing concepts, multicomponet reactors and the hydrodynamics associated with their operations, and slurry flow behavior associated with non-Newtonian flows.
Download or read book Current Topics in Elastomers Research written by Anil K. Bhowmick and published by CRC Press. This book was released on 2008-05-07 with total page 1153 pages. Available in PDF, EPUB and Kindle. Book excerpt: From weather-proof tires and artificial hearts to the o-rings and valve seals that enable successful space exploration, rubber is an indispensable component of modern civilization. Stiff competition and stringent application requirements foster continuous challenges requiring manufacturers to fund ever-expanding research projects. However, this vas
Download or read book Handbook of Engineering Polymeric Materials written by P. Cheremisinoff and published by CRC Press. This book was released on 1997-07-25 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting practical information on new and conventional polymers and products as alternative materials and end-use applications, this work details technological advancements in high-structure plastics and elastomers, functionalized materials, and their product applications. The book also provides a comparison of manufacturing and processing techniques from around the world. It emphasizes product characterization, performance attributes and structural properties.
