Download or read book Metallography and Fractography XVII written by Peter Horňak and published by Trans Tech Publications Ltd. This book was released on 2020-11-16 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected full text papers from the 17th International Symposium on Metallography, Fractography and Materials Science (2019) Selected, peer-reviewed papers from the 17th International Symposium on Metallography, Fractography and Materials Science (Metallography XVII), April 24 – 26, 2019, Nový Smokovec, High Tatra Mountains, Slovak Republic

Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.

Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations

Download or read book Introduction to the Physical Metallurgy of Welding written by Kenneth Easterling and published by Elsevier. This book was released on 2013-09-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Microstructure and Texture in Steels written by Arunansu Haldar and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.

Download or read book Guide for Welding Iron Castings written by and published by Amer Welding Society. This book was released on 1989-01-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding Essentials written by William L. Galvery and published by Industrial Press Inc.. This book was released on 2001 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bestselling reference that makes welding easy for beginners and is handy for professionals. This guide's unique, comprehensive question-and-answer format allows readers to quickly find and fully understand what they are looking for. Expanded to include a new and heavily illustrated chapter on fabrication and repair tips.

Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.

Download or read book Scanning Microscopy for Nanotechnology written by Weilie Zhou and published by Springer Science & Business Media. This book was released on 2007-03-09 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents scanning electron microscopy (SEM) fundamentals and applications for nanotechnology. It includes integrated fabrication techniques using the SEM, such as e-beam and FIB, and it covers in-situ nanomanipulation of materials. The book is written by international experts from the top nano-research groups that specialize in nanomaterials characterization. The book will appeal to nanomaterials researchers, and to SEM development specialists.

Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.

Download or read book Stainless Steels written by Joseph Ki Leuk Lai and published by Bentham Science Publishers. This book was released on 2012 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Stainless Steels: An Introduction and Their Recent Developments explains issues related to surface treatment, grain refinement, coloration, defect detection and powder metallurgy of stainless steels in detail with reference to new research findings. It al"

Download or read book Martensite written by Gregory B. Olson and published by ASM International(OH). This book was released on 1992 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explanations of the mechanisms and kinetics of martensitic transformations and behavior of martensitic materials (such as shape memory alloys and high performance steels) form the backbone of this collection of reviews honoring materials science pioneer Morris Cohen of MIT. Among the topics: thermod

Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field

Download or read book Tandem Cold Metal Rolling Mill Control written by John Pittner and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a novel and practical advanced method for control of tandem cold metal rolling processes based on the emerging state-dependent Riccati equation technique. After a short history of tandem cold rolling, various types of cold rolling processes are described. A basic mathematical model of the process is discussed, and the diverse conventional control methods are compared. A detailed treatment of the theoretical and practical aspects of the state-dependent algebraic Riccati equation technique is given, with specific details of the new procedure described and results of simulations performed to verify the control model and overall system performance with the new controller coupled to the process model included. These results and data derived from actual operating mills are compared showing the improvements in performance using the new method. Material is included which shows how the new technique can be extended to the control of a broad range of large-scale complex nonlinear processes.

Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.

Download or read book Physical Foundations of Materials Science written by Günter Gottstein and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them transmission electron microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.