Download or read book Single phase Two phase and Supercritical Natural Circulation Systems written by Pallippattu Krishnan Vijayan and published by Woodhead Publishing. This book was released on 2019-06-19 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-Phase, Two-Phase and Supercritical Natural Circulation Systems provides readers with a deep understanding of natural circulation systems. This book equips the reader with an understanding on how to detect unstable loops to ensure plant safety and reliability, calculate heat transport capabilities, and design effective natural circulation loops, stability maps and parallel channel systems. Each chapter begins with an introduction to the circulation system before discussing each element in detail and analyzing its effect on the performance of the system. The book also presents thermosyphon heat transport devices in nuclear and other industrial plants, a common information need for students and researchers alike. This book is invaluable for engineers, designers, operators and consultants in nuclear, mechanical, electrical and chemical disciplines. - Presents single-phase, two-phase and supercritical natural circulation systems together in one resource to fill an existing knowledge gap - Guides the reader through relevant processes, such as designing, analyzing and generating stability maps and natural circulation loops, calculating heat transport capabilities, and maintaining natural circulation system operations - Includes global case studies and examples to increase understanding, along with important IAEA standards and procedures
Download or read book Natural Circulation in Water Cooled Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the state of knowledge of natural circulation in water cooled nuclear power plants and passive system reliability. The publication presents information on phenomena, models, predictive tools and experiments that currently support design and analysis of natural circulation systems, and highlights areas where additional research is needed.
Download or read book Analyses of Natural Circulation During a Surry Station Blackout Using SCDAP RELAP5 written by Paul D. Bayless and published by . This book was released on 1988 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Analytical Modeling of Natural Circulation and Forced Circulation BWRs written by Masahiro Furuya and published by IOS Press. This book was released on 2006 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: 20% of the Nuclear Power Plants are known as Boiling Water Reactors (BWRs). These BWRs have pumps that cool their reactor. In the design of new BWRs, ways to cool the core by a natural circulation flow, without pumps, also called natural circulation BWRs, are being considered. In these new systems, a chimney is installed on top of the core to increase natural circulation flow. A possible disadvantage of natural circulation BWRs might be their susceptibility to instabilities, which could then lead to both flow and power oscillations. The stability features of both natural circulation and forced circulation BWRs have been investigated thoroughly, using dedicated experimental setups, analytical models and numerical codes. We distinguish between pure thermal-hydraulic stability - where the fission power is assumed to be constant - and coupled thermalhydraulic-neutronic stability - where the two-phase mixture in the core influences the fission chain reaction...
Download or read book Experimental and Numerical Stability Investigations on Natural Circulation Boiling Water Reactors written by Christian Pablo Marcel and published by IOS Press. This book was released on 2007 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the design of novel nuclear reactors active systems are replaced by passive ones in order to reduce the risk of failure. For that reason natural circulation is being considered as the primary cooling mechanism in next generation nuclear reactor designs such as the natural circulation boiling water reactor (BWR). In such a reactor, however, the flow is not a controlled parameter but is dependent on the power. As a result, the dynamical behavior significantly differs from that in conventional forced circulation BWRs. For that reason, predicting the stability characteristics of these reactors has to be carefully studied. In this work, a number of open issues are investigated regarding the stability of natural circulation BWRs (e.g. margins to instabilities at rated conditions, interaction between the thermal-hydraulics and the neutronics, and the occurrence of flashing induced instabilities) with a strong emphasis on experimental evidence.
Download or read book Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems written by Chen, Lin and published by IGI Global. This book was released on 2020-08-28 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are increasingly being used in energy conversion and fluid dynamics studies for energy-related systems and applications. These new applications are contributing to both the increase of energy efficiency as well as greenhouse gas reduction. Such research is critical for scientific advancement and industrial innovations that can support environmentally friendly strategies for sustainable energy systems. The Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems is a comprehensive two-volume reference that covers the most recent and challenging issues and outlooks for the applications and innovations of supercritical fluids. The book first converts basic thermo-dynamic behaviors and “abnormal” properties from a thermophysical aspect, then basic heat transfer and flow properties, recent new findings of its physical aspect and indications, chemical engineering properties, micro-nano-scale phenomena, and transient behaviors in fast and critical environments. It is ideal for engineers, energy companies, environmentalists, researchers, academicians, and students studying supercritical fluids and their applications for creating sustainable energy systems.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1980 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2015-08-20 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies
Download or read book ATL A written by and published by . This book was released on 1960 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants. Presents a thematic and comprehensive discussion on each aspect of CFD applications for the design and safety assessment of nuclear reactors Provides an historical review of the development of CFD models, discusses state-of-the-art concepts, and takes an applied and analytic look toward the future Includes CFD tools and simulations to advise and guide the reader through enhancing cost effectiveness, safety and performance optimization
Download or read book Propagation of Density Disturbances in Air water Flow written by George Peter Nassos and published by . This book was released on 1965 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1981-11 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preliminary safety and environmental information document written by Argonne National Laboratory and published by . This book was released on 1980 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Energy and the Environment written by Adrian Bejan and published by Springer Science & Business Media. This book was released on 1999 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state of the art at the interface between energy and environmental research. The contributing authors are some of the world leaders in research and education on energy and environmental topics. The coverage is worth noting for its breadth and depth. The book begins with the latest trends in applied thermodynamics: the methods of exergy analysis, entropy generation minimization and thermoeconomics. It continues with the most modern developments in energy processing and conservation techniques: heat transfer augmentation devices, inverse thermal design, combustion and heat exchangers for environmental systems. The environmental impact of energy systems is documented in a diversity of applications such as the flow of hazardous waste through cracks and porous media, thermally induced flows through coastal waters near power plants, and lake ecology in the vicinity of pumped storage systems. The book outlines new research directions such as the manufacturing of novel materials from solid waste, advances in radiative transport, the measurement of convective heat transfer in gas turbines and environmentally acceptable refrigerants. The book is rich in engineering design data that make a concrete statement on topics of world wide interest, e.g., toxic emissions, the depletion of energy resources, global environmental change (global warming), and future trends in the power generation industries. Written by leaders in research and education, this book is an excellent text or supplement for undergraduate and graduate courses on energy engineering and environmental science.
Download or read book Thorium Energy for the Future written by A.K. Nayak and published by Springer. This book was released on 2019-01-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the ThEC15 conference. The book presents research findings on various facets of thorium energy, including exploration and mining, thermo-physical and chemical properties of fuels, reactor physics, challenges in fuel fabrication, thorium fuel cycles, thermal hydraulics and safety, material challenges, irradiation experiences, and issues and challenges for the design of advanced thorium fueled reactors. Thorium is more abundant than uranium and has the potential to provide energy to the world for centuries if used in a closed fuel cycle. As such, technologies for using thorium for power generation in nuclear reactors are being developed worldwide. Since there is a strong global thrust towards designing nuclear reactors with thorium-based fuel, this book will be of particular interest to nuclear scientists, reactor designers, regulators, academics and policymakers.
Download or read book Steam Generators written by Donatello Annaratone and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originates from 35 years of teaching Steam Generators to graduate students at the Politecnico of Milan, and from 45 years of professional activity in this area. This book has been written for practicing designers, users, and engineers of steam generators in order to guide them through practical problems and help avoiding technical mistakes. Technical studies and solutions for various applications are presented, and the author presents some of his original studies.
