Download or read book National Aerospace and Defense Contractors Accreditation Program Nadcap Requirements for Accreditation of Value Added Distributors written by Nadcap Management Council and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has been declared "CANCELLED" as of June 2017 and has been superseded by PRI AC7202. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7202. Cancelled specifications are available from SAE.AS7202A is being cancelled and superseded by PRI AC7202.

Download or read book NATIONAL AERSPACE AND DEFENSE CONTRACTORS ACCREDDITATION PROGRAM NADCAP REQUIREMENTS FOR ACCREDITATION OF VALUE ADDED DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a "Value Added" distributor for third party accreditation.

Download or read book National Aerospace and Defense Contractors Accreditation Program NADCAP Requirements for Accreditation of Pass Through Distributors written by Nadcap Management Council and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has been declared "CANCELLED" as of November 2007. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.The Nadcap Management Council approved the cancellation of the Nadcap Distributor Accreditation Programs (AC7103, AC7103/1, AC7103/2, and AC7104 and all related standards) during the October 2006 meeting.Effective January 2007, Nadcap will no longer certify Full or Pass-Through Distributors. All future audits have been cancelled and those companies affected have been notified. Any payments made for these future audits were refunded.Existing Accreditation Certificates for the affected standards will remain in effect until their identified expiration dates. Requests for extension to those expiration dates will be considered by the AQS Task Group in accordance with current practices.The basis for cancellation of this program was the limited number of participating distributors and prime users. The program has been steadily shrinking over the last several years, due in part by the increasing recognition of the international standard for pass-through distributors (stockists), AS/EN/SJAC 9120. There is also an increasing requirement by prime users to require a more complete quality system standard for those distributors performing value-added processing, such as AS/EN/SJAC 9100 or ISO 9001:2000.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP REQUIREMENTS FOR ACCREDITATION OF PASS THRU DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a "PASS-THRU" distributor for third party accreditation.

Download or read book NADCAP REQUIREMENTS FOR ACCREDITATION OF FULL DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the minimum requirements for the quality assurance program of a distributor of factory new material and excess inventory, assembled, altered, new, used, remanufactured, repaired, rebuilt or overhauled parts and materials. It is applicable to the distributor who procures parts and materials, assembles higher level components/assemblies from parts or kits, or performs or contracts for the alteration, assembly, modification, remanufacture, repair, rebuilding or overhaul of products and resells them to customers or other distributors (i.e., a VALUE ADDED DISTRIBUTOR).NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by the NADCAP Distributors Task Group. Using the audit checklist (AC7104) will ensure that accredited Full Distributors meet all of the requirements in this standard and all applicable supplementary standards.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) documents the requirements for implementing NADCAP industry consensus-based accreditation programs.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of a General Quality System the meets, at a minimum, MIL-Q-9858. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-Q-9858, MIL-STD-45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.

Download or read book National Aerospace and Defense Contractors Accreditation Program NADCAP General Requirements for Materials Testing Laboratory Accreditation Program written by and published by . This book was released on 1997 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP PROGRAM OPERATION written by Nadcap Management Council and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) documents the operating instructions, rules, policies, and practices of the Performance Review Institute (PRI), an affiliate of SAE.Covered in this standard are the operations of NADCAP committees, headquarters and field personnel, requirements for ongoing relations with suppliers, and procedures for conducting audits, continuing surveillance and accreditation. Supporting SAE NADCAP Aerospace Standards provide supplier requirements for complying with each individual accreditation process.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for manufacturers of Fluid System Components to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Fluid System Components Task Group. Using the corrsponding Audit Criteria checklists (PRI ACs) will ensure that accredited Fluid System suppliers meet all of the requirements in this standard and all applicable supplementary standards.The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. The information thus obtained will be used for determination of accreditation status, and may be used by the supplier to guide improvements in the product/service or associated processes.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of an Inspection System that meets, at a minimum, MIL-I-45208. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-I-45208, MIL-STD- 45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes the minimum requirements for materials testing laboratories (MTL) accredited by NADCAP. The following test methods and processes for metallic material systems are covered in this standard. aChemical Testing bMechanical Testing cMetallography and Microhardness dHardness eCorrosion fMechanical Testing Specimen Preparation gDifferential Thermal Analysis hHeat Treating iX-Ray Diffraction jFastener Testing Slower quench rates tend to produce lower tensile strength in Quench & Temper and Solution & Age alloys. For example, properties of water quenched specimen material may not adequately represent oil or air quenched parts. (In most cases, specimen material has less effective thickness hence a naturally faster cooling rate than the parts represented even when the same type quench is used.).

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONCONVENTIONAL MACHINING written by Nadcap Management Council and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of Nonconventional Machining Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the NADCAP Nonconventional Machining and Surface Enhancement (NMSE) Task Group. Using the corresponding Audit Criteria (PRI AC7116) will ensure that accredited Nonconventional Machining suppliers meet all of the requirements in this standard and all applicable supplementary standards.The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. This information will be used in the determination of accreditation status and may be used by the supplier to guide improvements in the product or service and the associated processes.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CHEMICAL PROCESSING written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of Chemical Processing Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processes Task Group. Using the audit checklist (AC7108) will ensure that accredited Chemical Process suppliers meet all of the requirements in this standard and all applicable supplementary standards.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP RULES FOR IMPLEMENTATION written by Nadcap Management Council and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes rules for the implementation of the National Aerospace and Defense Contractors Accreditation Program (NADCAP) to accredit the capability of suppliers furnishing processes, products, and services for the aerospace and defense industries as provided for in specific programs. These rules shall be in compliance with the latest issue of Aerospace Standard AS7003.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP PROGRAM DESCRIPTION written by Nadcap Management Council and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard describes the National Aerospace and Defense Contractors Accreditation Program (NADCAP) to accredit the capability of suppliers furnishing processes, products, and services for the aerospace and defense industries as provided for in specific programs.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FITTINGS AND OTHER MACHINED COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7112. In addition to the requirements contained in AS7112, the requirements contained herein shall apply to suppliers seeking NADCAP Fluid System Components Accreditation for Fittings and Other Machined Components.