Download or read book Nanostructured Materials and Nanotechnology IV Volume 31 Issue 7 written by Sanjay Mathur and published by Wiley-American Ceramic Society. This book was released on 2010-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 17 peer-reviewed (invited and contributed) papers covering various aspects and the latest developments related to processing, modeling and manufacturing technologies of nanoscaled materials including inorganic-organic nanocomposites, nanowire-based sensors, new generation photovoltaic cells, self-assembly of nanostructures, functional nanostructures for cell tracking and heterostructures. Each manuscript was peer-reviewed using The American Ceramic Society review process.
Download or read book Nanostructured Materials and Nanotechnology IV written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 17 peer-reviewed (invited and contributed) papers covering various aspects and the latest developments related to processing, modeling and manufacturing technologies of nanoscaled materials including inorganic-organic nanocomposites, nanowire-based sensors, new generation photovoltaic cells, self-assembly of nanostructures, functional nanostructures for cell tracking and heterostructures. Each manuscript was peer-reviewed using The American Ceramic Society review process.
Download or read book Strategic Materials and Computational Design written by Waltraud M. Kriven and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions from three Focused Sessions that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the Focused Session titles, which are listed as follows: FS1 - Geopolymers and other Inorganic Polymers; FS3 - Computational Design, Modeling Simulation and Characterization of Ceramics and Composites; and FS4 - Nanolaminated Ternary Carbides and Nitrides (MAX Phases). The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the US Air Force Office of Scientific Research (AFOSR) through Dr. Joan Fuller. The AFOSR has continuously supported these conferences since the first meeting in Nashville, TN in 2003. Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP. Focused Session 4 was dedicated to MAX phases - a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 ...). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.
Download or read book Advanced Materials for Sustainable Developments written by Hua-Tay Lin and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions from three symposia that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the symposia titles, which are listed as follows: International Symposium on Ceramics for Electric Energy Generation, Storage, and Distribution (debuted in 2010); Thermal Management Materials and Technologies (debuted in 2010); and lastly, and Advanced Sensor Technology, Developments and Applications (debuted in 2010). These new symposia emerged during this ICACC meeting due to community growth and interest, and thus each of these subject areas were established as stand-alone symposia. The current volume represents 15 contributions from the above listed symposia that embody the latest developments in engineering ceramics for energy technologies, thermal management utilizing either highly conductive or insulating materials, as well as advances regarding the utilization of ceramics for sensors.
Download or read book Advances in Solid Oxide Fuel Cells VI written by Prabhakar Singh and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Seventh International Symposium on Solid Oxide Fuel Cells (SOFC): Materials, Science, and Technology was held during the 34th International Conference and Exposition on Advanced Ceramics and Composites in Daytona Beach, FL, January 24 to 29, 2010. This symposium provided an international forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on various aspects of solid oxide fuel cells. A total of 75 papers were presented in the form of oral and poster presentations, including ten invited lectures, indicating strong interest in the scientifically and technologically important field of solid oxide fuel cells. Authors from eleven countries (China, Denmark, Germany India, Italy, Japan, Russia, South Korea, Taiwan, UK and U.S.A.) participated. The speakers represented universities, industries, and government research laboratories. These proceedings contain contributions on various aspects of solid oxide fuel cells that were discussed at the symposium. Fifteen papers describing the current status of solid oxide fuel cells technology are included in this volume.
Download or read book Advances in Ceramic Armor VI written by Swab and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Armor Ceramics Symposium was held January 25-27, 2010 in Daytona Beach, FL as part of the 34th International Conference & Exposition on Advanced Ceramics and Composites. The 8th edition of this symposium consisted of over 65 oral and poster presentations on topics such as Impact, Penetration and Material Modeling, Boron Carbide, Silicon Carbide, Dynamic Material Behavior, Transparent Materials and NDE Applications. The symposium continues to foster discussion and collaboration between academic, government and industry personnel from around the globe.
Download or read book Advanced Ceramic Coatings and Interfaces V written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications.
Download or read book Advances in Bioceramics and Porous Ceramics III written by Roger Narayan and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains the proceedings of the “Porous Ceramics: Novel Developments and Applications” and “Next Generation Bioceramics” symposia, which were held on January 24-29, 2010 at the Hilton Daytona Beach Resort and the Ocean Center in Daytona Beach, Florida, USA. The interaction between ceramic materials and living organisms is a leading area of ceramics research. Novel bioceramic materials are being developed that will provide improvements in diagnosis and treatment of medical and dental conditions. In addition, bioinspired ceramics and biomimetic ceramics have generated considerable interest in the scientific community. The “Next Generation Bioceramics” symposium addressed several leading areas related to the development and use of novel bioceramics, including advanced processing of bioceramics; biomineralization and tissue-material interactions; bioinspired and biomimetic ceramics; ceramics for drug delivery; ceramic biosensors; in vitro and in vivo characterization of bioceramics; mechanical properties of bioceramics; and nanostructured bioceramics. The “Porous Ceramics” symposium aimed to bring together engineers and scientists in the area of ceramic materials containing high volume fractions of porosity, in which the porosity ranged from nano- to millimeters. These materials have attracted significant academic and industrial attention for use in environmental applications, an area where ceramics, particularly porous ones, play a key role because of their suitable properties. Therefore, a significant number of contributions, of which some are present in this volume, was devoted to the fabrication and characterization of porous ceramics for gas purification (e.g., H2 separation and CO2 separation) as well as to particulate filtration (e.g., diesel engine soot). A leading area of ceramics research involves the development of porous ceramics for medical, dental, and biotechnology applications. For example, porous ceramics are under development for use as bone substitutes because a porous structure may enhance tissue ingrowth. Therefore, tailoring of porosity to give specific characteristics, in terms of the amount of interconnecting cells and of the cell and cell window size is required. A joint session involving participants from bioceramics and porous ceramics symposia was therefore held in order to stimulate discussion and productive interactions between the two scientific communities.
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including green manufacturing, smart processing, advanced composite manufacturing, rapid processing, joining, machining, and net shape forming technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.
Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites V written by Dileep Singh and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida. The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (>100) of presentations at the ICACC’10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included: • Ceramics and composites for engine applications • Design and life prediction methodologies • Environmental effects on mechanical properties • Mechanical behavior of porous ceramics • Ultra high temperature ceramics • Ternary compounds • Mechanics & characterization of nanomaterials and devices • Novel test methods and equipment • Processing - microstructure - mechanical properties correlations • Ceramics & composites joining and testing • NDE of ceramic components
Download or read book Nanostructured Materials and Nanotechnology III Volume 30 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2009-12-17 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful resource will help you understand the most valuable aspects of nanostructured materials and nanotechnology. Containing 16 peer-reviewed papers, this issue covers various aspects and the latest developments related to processing, modeling and manufacturing technologies of nanoscaled materials including CNT and clay-based composites, nanowire-based sensors, new generation photovoltaic cells, plasma processing of functional thin films, ceramic membranes and self-assembled functional nanostructures.
Download or read book Nanostructured Materials and Nanotechnology VII Volume 34 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 7 - Nanostructured Materials and Nanotechnology VII A collection of 15 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Nanostructured Materials and Nanotechnology (Symposium 7) and Nanomaterials for Sensing Applications symposia (Focused Session 3).
Download or read book Nanostructured Materials and Nanotechnology VII Volume 34 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2013-11-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 7 - Nanostructured Materials and Nanotechnology VII A collection of 15 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Nanostructured Materials and Nanotechnology (Symposium 7) and Nanomaterials for Sensing Applications symposia (Focused Session 3).
Download or read book Nanostructured Materials and Nanotechnology VI Volume 33 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2012-11-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue features fourteen peer-reviewed papers originating from The 6th International Symposium on Nanostructured Materials and Nanotechnology. It includes Nanostructured coatings by cluster beam deposition; a new greener synthetic route to cadmium/lead selenide and telluride nanoparticles; and much more. Held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC), the symposium covered a broad range of issues, including synthesis, processing, modeling, and structure-property correlations in nanomaterials and nanocomposites, enabling scientists, engineers, and technologists from around the world to explore the latest developments in the field.
Download or read book Nanostructured Materials and Nanotechnology V Volume 32 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2011-11-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the 5th International Symposium on Nanostructured Materials and Nanotechnology on topics such as Nanotubes, Nanorods, Nanowires and other One-dimensional Structures; Nanostructured Membranes, Thin Films, and Functional Coatings; Synthesis, Functionalization and Processing of Nanostructured Materials; and Advanced Applications.
Download or read book Nanostructured Materials and Nanotechnology VI Volume 33 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2012-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue features fourteen peer-reviewed papers originating from The 6th International Symposium on Nanostructured Materials and Nanotechnology. It includes Nanostructured coatings by cluster beam deposition; a new greener synthetic route to cadmium/lead selenide and telluride nanoparticles; and much more. Held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC), the symposium covered a broad range of issues, including synthesis, processing, modeling, and structure-property correlations in nanomaterials and nanocomposites, enabling scientists, engineers, and technologists from around the world to explore the latest developments in the field.
Download or read book Advances in Solid Oxide Fuel Cells IX Volume 34 Issue 4 written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2013-11-26 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 4 - Advances in Solid Oxide Fuel Cells IX A collection of 13 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in Symposium 3 - 10th International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology.