Download or read book Precursor Chemistry of Advanced Materials written by Roland A. Fischer and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material synthesis by the transformation of organometallic compounds (precursors) by vapor deposition techniques such as chemical vapor deposition (CVD) and atomic layer deposition (ALD) has been in the forefront of modern day research and development of new materials. There exists a need for new routes for designing and synthesizing new precursors as well as the application of established molecular precursors to derive tuneable materials for technological demands. With regard to the precursor chemistry, a most detailed understanding of the mechanistic complexity of materials formation from molecular precursors is very important for further development of new processes and advanced materials. To emphasize and stimulate research in these areas, this volume comprises a selection of case studies covering various key-aspects of the interplay of precursor chemistry with the process conditions of materials formation, particularly looking at the similarities and differences of CVD, ALD and nanoparticle synthesis, e.g. colloid chemistry, involving tailored molecular precursors.
Download or read book Nanomaterials via Single Source Precursors written by Allen W. Apblett and published by Elsevier. This book was released on 2022-02-19 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials via Single-Source Precursors: Synthesis, Processing and Applications presents recent results and overviews of synthesis, processing, characterization and applications of advanced materials for energy, electronics, biomedicine, sensors and aerospace. A variety of processing methods (vapor, liquid and solid-state) are covered, along with materials, including metals, oxides, semiconductor, sulfides, selenides, nitrides, and carbon-based materials. Production of quantum dots, nanoparticles, thin films and composites are described by a collection of international experts. Given the ability to customize the phase, morphology, and properties of target materials, this "rational approach to synthesis and processing is a disruptive technology for electronic, energy, structural and biomedical (nano)materials and devices. The use of single-source chemical precursors for materials processing technology allows for intimate elemental mixing and hence production of complex materials at temperatures well below traditional physical methods and those involving direct combination of elements. The use of lower temperatures enables thin-film deposition on lightweight polymer substrates and reduces damage to complex devices structures such as used in power, electronics and sensors. - Discusses new approaches to synthesis or single-source precursors (SSPs) and the concept of rational design of materials - Includes materials processing of SSPs in the design of new materials and novel devices - Provides comprehensive coverage of the subject (materials science and chemistry) as related to SSPs and the range of potential applications
Download or read book Reactive Oxygen Species ROS Nanoparticles and Endoplasmic Reticulum ER Stress Induced Cell Death Mechanisms written by Loutfy H. Madkour and published by Academic Press. This book was released on 2020-06-27 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive Oxygen Species (ROS), Nanoparticles, and Endoplasmic Reticulum (ER) Stress-Induced Cell Death Mechanisms presents the role of ROS?mediated pathways cellular signaling stress, endoplasmic reticulum (ER) stress, oxidative stress, oxidative damage, nanomaterials, and the mechanisms by which metalloids and nanoparticles induce their toxic effects. The book covers the ecotoxicology of environmental heavy metal ions and free radicals on macromolecules cells organisms, heavy metals?induced cell responses, oxidative stress, the source of oxidants, and the roles of ROS, oxidative stress and oxidative damage mechanisms. It also examines the nanotoxicity, cytotoxicity and genotoxicity mechanisms of nanomaterials and the effects of nanoparticle interactions. Antioxidant defense therapy and strategies for treatment round out the book, making it an ideal resource for researchers and professional scientists in toxicology, environmental chemistry, environmental science, nanomaterials and the pharmaceutical sciences. - Covers the ecotoxicology of environmental heavy metal ions and the interactions between specific heavy metals?induced cell responses and oxidative stress - Provides a better understanding of the mechanism of nanomaterial-induced toxicity as a first defense for hazard prevention - Covers recent advances in new nanomedication technologies for the effects of NPs on oxidative stress, ROS and ER stress - Discusses the effects of interactions between antioxidant defense therapy, ROS and strategies for treatment
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.
Download or read book Nanoparticles and Catalysis written by Didier Astruc and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts, this monograph combines two of the most important aspects of modern chemistry, presenting the latest knowledge on these environmental friendly applications. This result is a comprehensive overview of the application of nanoparticles in catalysis, focusing on synthesis and the most important reaction types, providing all the information needed by catalytic, organic and solid state chemists, as well as those working with or on organometallics, materials scientists, and chemists in industry.
Download or read book Nanoparticle Technologies written by Farid Bensebaa and published by Academic Press. This book was released on 2012-12-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a good introductory work to nanoparticle technology. It consists of nine complementary chapters that can be read independently. This book covers promising nanoparticles fabrication technologies with a focus on scalable processes. Integration of nanoparticles into 2D and 3D structures are covered in detail. The most promising applications of nanoparticles in the energy, optoelectronic and biomedical sectors are summarized and discussed. Current issues and challenges related to nanoparticles production and utilisation are also discussed in the book. Complete and simple overview of the field Contains practical examples that makes the book also accessible for industrialists, engineers and managers Chapters can be read relatively independently so experienced researchers can go directly to the them of interest Advantages, drawbacks and challenges are described with practical examples
Download or read book Chemically Deposited Metal Chalcogenide based Carbon Composites for Versatile Applications written by Fabian I. Ezema and published by Springer Nature. This book was released on 2023-03-30 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book satisfies the interest and curiosity of beginners in thin film electrode preparations, characterizations, and device making, while providing insight into the area for experts. The considerable literature on ‘metal chalcogenides based carbon composites and their versatile applications’ reflect its importance for research and demonstrate how it’s now reached a level where the timely review is necessary to understand the current progress and recent trends and future opportunities. In the book, the authors examine recent advances in the state-of-the-art fabrication techniques of metal sulfide based carbon composites along with their working mechanisms, associated issues/solutions, and possible future are discussed. In addition, detailed insight into the properties and various applications including principles, design, fabrication, and engineering aspects are further discussed.
Download or read book Nanoparticles written by Celso de Mello Donegá and published by Springer. This book was released on 2014-10-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be roughly divided into three parts: fundamental physico-chemical and physical principles of Nanoscience, chemistry and synthesis of nanoparticles, and techniques to study nanoparticles. The first chapter is concerned with the origin of the size dependence of the properties of nanomaterials, explaining it in terms of two fundamental nanoscale effects. This chapter also serves as a general introduction to the book, briefly addressing the definition and classification of nanomaterials and the techniques used to fabricate and study them. Chapter 2 lays out the theoretical framework within which to understand size effects on the properties of semiconductor nanocrystals, with particular emphasis on the quantum confinement effect. The optical properties of metal nanoparticles and metal nanostructures (periodic lattices) are discussed in Chapter 3. Chapter 4 is devoted to nanoporous materials, treating in detail their synthesis, structure and functional properties, as well as the physical properties of liquids confined in nanopores. The preparation methods, characterization techniques, and applications of supported nanoparticles are covered in Chapter 5. The sixth Chapter presents the essential physical-chemical concepts needed to understand the preparation of colloidal inorganic nanoparticles, and the remarkable degree of control that has been achieved over their composition, size, shape and surface. The last four Chapters are dedicated to a few selected characterization techniques that are very valuable tools to study nanoparticles. Chapter 7 concentrates on electron microscopy techniques, while Chapter 8 focuses on scanning probe microscopy and spectroscopy. Electron paramagnetic resonance (EPR) based spectroscopic techniques and their application to nanoparticles are explored in Chapter 9. Finally, Chapter 10 shows how solution Nuclear Magnetic Resonance (NMR) spectroscopic techniques can be used to unravel the surface chemistry of colloidal nanoparticles.
Download or read book Nanoparticles written by American Chemical Society. Meeting and published by . This book was released on 2008 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes recent advances in methods to synthesize, stabilize, passivate and functionalize diverse nanoparticles from metals, metal oxides, semiconductors, polymers, organics and biomolecules. A wide range of potential appplications with nanoparticles as building blocks are described.
Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Materials in Chemistry written by Kenneth J. Klabunde and published by John Wiley & Sons. This book was released on 2004-08-13 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, interest in the preparation and characterization of nanostructured materials has grown due to their distinctive properties and potential technological applications. Nanoscale materials represent a new realm of matter and offer widespread possibilities for contributions to science and technology. Nanoscale Materials in Chemistry explores the vast potential of nanomaterials and serves as essential reading for the entire science community. The extensive coverage of Nanoscale Materials in Chemistry presents a thorough introduction to the field of nanostructured materials, including chemical synthesis methods, bonding theories, and applications. Because nanomaterials are finding more applications in the real world, this text contains up-to-date treatment of such topics as: Metals, semiconductor nanocrystals, and ceramics Double layers, optical properties, and the electrochemistry of metal nanoparticles Chemical and catalytic aspects of nanocrystals Specific heats and melting points of nanocrystalline materials Authored by world-renowned experts in the field of nanotechnology, Nanoscale Materials in Chemistry is suitable as a primary text for graduate courses and is a reliable resource for scientists.
Download or read book Metal Nanoparticles written by Daniel L. Fedlheim and published by CRC Press. This book was released on 2001-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art reference, Metal Nanoparticles offers the latest research on the synthesis, characterization, and applications of nanoparticles. Following an introduction of structural, optical, electronic, and electrochemical properties of nanoparticles, the book elaborates on nanoclusters, hyper-Raleigh scattering, nanoarrays, and several applications including single electron devices, chemical sensors, biomolecule sensors, and DNA detection. The text emphasizes how size, shape, and surface chemistry affect particle performance throughout. Topics include synthesis and formation of nanoclusters, nanosphere lithography, modeling of nanoparticle optical properties, and biomolecule sensors.
Download or read book Nanostructures Nanomaterials written by Guozhong Cao and published by Imperial College Press. This book was released on 2004 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications Includes black TiO2 based cancer theranostics in its coverage Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Fluorinated Hydrocarbons Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluorinated Hydrocarbons—Advances in Research and Application: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Chlorofluorocarbons. The editors have built Fluorinated Hydrocarbons—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Chlorofluorocarbons in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Fluorinated Hydrocarbons—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Green Nanomaterials written by Siddharth V. Patwardhan and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers emerging bioinspired green methods for preparing inorganic nanomaterials. The book starts with an introduction to the principles of green chemistry and engineering, and highlights the special properties that nanomaterials possess, their applications and ways to characterise them. It describes conventional methods of synthesising and manufacturing inorganic nanomaterials, and introduces biological and biomimetic/bioinspired synthetic methods as a solution to precisely control nanomaterials and design sustainable manufacturing routes. The book elaborates on various mechanisms and examples of green nanomaterials, including the role of organic matrix and natural self-assembly, and advantages and opportunities with green nanomaterials. Two case studies of magnetic and silica materials are provided for advanced readers. The book is an insightful reference text for researchers focusing on synthetic biology and nanomaterials. It is an essential title for postgraduates and final-year undergraduates studying advanced materials, sustainable engineering or environmental chemistry.
