Download or read book Bayesian Process Monitoring Control and Optimization written by Bianca M. Colosimo and published by CRC Press. This book was released on 2006-11-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there are many Bayesian statistical books that focus on biostatistics and economics, there are few that address the problems faced by engineers. Bayesian Process Monitoring, Control and Optimization resolves this need, showing you how to oversee, adjust, and optimize industrial processes. Bridging the gap between application and dev

Download or read book Multivariate Statistical Process Control written by Zhiqiang Ge and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their key position in the process control industry, process monitoring techniques have been extensively investigated by industrial practitioners and academic control researchers. Multivariate statistical process control (MSPC) is one of the most popular data-based methods for process monitoring and is widely used in various industrial areas. Effective routines for process monitoring can help operators run industrial processes efficiently at the same time as maintaining high product quality. Multivariate Statistical Process Control reviews the developments and improvements that have been made to MSPC over the last decade, and goes on to propose a series of new MSPC-based approaches for complex process monitoring. These new methods are demonstrated in several case studies from the chemical, biological, and semiconductor industrial areas. Control and process engineers, and academic researchers in the process monitoring, process control and fault detection and isolation (FDI) disciplines will be interested in this book. It can also be used to provide supplementary material and industrial insight for graduate and advanced undergraduate students, and graduate engineers. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book An Introduction to Acceptance Sampling and SPC with R written by John Lawson and published by CRC Press. This book was released on 2021-02-25 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Acceptance Sampling and SPC with R is an introduction to statistical methods used in monitoring, controlling and improving quality. Topics covered include acceptance sampling; Shewhart control charts for Phase I studies; graphical and statistical tools for discovering and eliminating the cause of out-of-control-conditions; Cusum and EWMA control charts for Phase II process monitoring; and the design and analysis of experiments for process troubleshooting and discovering ways to improve process output. Origins of statistical quality control and the technical topics presented in the remainder of the book are those recommended in the ANSI/ASQ/ISO guidelines and standards for industry. The final chapter ties everything together by discussing modern management philosophies that encourage the use of the technical methods presented earlier. In the modern world sampling plans and the statistical calculations used in statistical quality control are done with the help of computers. As an open source high-level programming language with flexible graphical output options, R runs on Windows, Mac and Linux operating systems, and has add-on packages that equal or exceed the capability of commercial software for statistical methods used in quality control. In this book, we will focus on several R packages. In addition to demonstrating how to use R for acceptance sampling and control charts, this book will concentrate on how the use of these specific tools can lead to quality improvements both within a company and within their supplier companies. This would be a suitable book for a one-semester undergraduate course emphasizing statistical quality control for engineering majors (such as manufacturing engineering or industrial engineering), or a supplemental text for a graduate engineering course that included quality control topics.

Download or read book Handbook of Multivariate Process Capability Indices written by Ashis Kumar Chakraborty and published by CRC Press. This book was released on 2021-01-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a single-valued assessment of the performance of a process is often one of the greatest challenges for a quality professional. Process Capability Indices (PCIs) precisely do this job. For processes having a single measurable quality characteristic, there is an ample number of PCIs, defined in literature. The situation worsens for multivariate processes, i.e., where there is more than one correlated quality characteristic. Since in most situations quality professionals face multiple quality characteristics to be controlled through a process, Multivariate Process Capability Indices (MPCIs) become the order of the day. However, there is no book which addresses and explains different MPCIs and their properties. The literature of Multivariate Process Capability Indices (MPCIs) is not well organized, in the sense that a thorough and systematic discussion on the various MPCIs is hardly available in the literature. Handbook of Multivariate Process Capability Indices provides an extensive study of the MPCIs defined for various types of specification regions. This book is intended to help quality professionals to understand which MPCI should be used and in what situation. For researchers in this field, the book provides a thorough discussion about each of the MPCIs developed to date, along with their statistical and analytical properties. Also, real life examples are provided for almost all the MPCIs discussed in the book. This helps both the researchers and the quality professionals alike to have a better understanding of the MPCIs, which otherwise become difficult to understand, since there is more than one quality characteristic to be controlled at a time. Features: A complete guide for quality professionals on the usage of different MPCIs. A step by step discussion on multivariate process capability analysis, starting from a brief discussion on univariate indices. A single source for all kinds of MPCIs developed so far. Comprehensive analysis of the MPCIs, including analysis of real-life data. References provided at the end of each chapter encompass the entire literature available on the respective topic. Interpretation of the MPCIs and development of threshold values of many MPCIs are also included. This reference book is aimed at the post graduate students in Industrial Statistics. It will also serve researchers working in the field of Industrial Statistics, as well as practitioners requiring thorough guidance regarding selection of an appropriate MPCI suitable for the problem at hand.

Download or read book Bayesian Data Analysis Third Edition written by Andrew Gelman and published by CRC Press. This book was released on 2013-11-01 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this classic book is widely considered the leading text on Bayesian methods, lauded for its accessible, practical approach to analyzing data and solving research problems. Bayesian Data Analysis, Third Edition continues to take an applied approach to analysis using up-to-date Bayesian methods. The authors—all leaders in the statistics community—introduce basic concepts from a data-analytic perspective before presenting advanced methods. Throughout the text, numerous worked examples drawn from real applications and research emphasize the use of Bayesian inference in practice. New to the Third Edition Four new chapters on nonparametric modeling Coverage of weakly informative priors and boundary-avoiding priors Updated discussion of cross-validation and predictive information criteria Improved convergence monitoring and effective sample size calculations for iterative simulation Presentations of Hamiltonian Monte Carlo, variational Bayes, and expectation propagation New and revised software code The book can be used in three different ways. For undergraduate students, it introduces Bayesian inference starting from first principles. For graduate students, the text presents effective current approaches to Bayesian modeling and computation in statistics and related fields. For researchers, it provides an assortment of Bayesian methods in applied statistics. Additional materials, including data sets used in the examples, solutions to selected exercises, and software instructions, are available on the book’s web page.

Download or read book Bayesian Multivariate Time Series Methods for Empirical Macroeconomics written by Gary Koop and published by Now Publishers Inc. This book was released on 2010 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bayesian Multivariate Time Series Methods for Empirical Macroeconomics provides a survey of the Bayesian methods used in modern empirical macroeconomics. These models have been developed to address the fact that most questions of interest to empirical macroeconomists involve several variables and must be addressed using multivariate time series methods. Many different multivariate time series models have been used in macroeconomics, but Vector Autoregressive (VAR) models have been among the most popular. Bayesian Multivariate Time Series Methods for Empirical Macroeconomics reviews and extends the Bayesian literature on VARs, TVP-VARs and TVP-FAVARs with a focus on the practitioner. The authors go beyond simply defining each model, but specify how to use them in practice, discuss the advantages and disadvantages of each and offer tips on when and why each model can be used.

Download or read book Statistical Process Monitoring Using Advanced Data Driven and Deep Learning Approaches written by Fouzi Harrou and published by Elsevier. This book was released on 2020-07-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Process Monitoring Using Advanced Data-Driven and Deep Learning Approaches tackles multivariate challenges in process monitoring by merging the advantages of univariate and traditional multivariate techniques to enhance their performance and widen their practical applicability. The book proceeds with merging the desirable properties of shallow learning approaches – such as a one-class support vector machine and k-nearest neighbours and unsupervised deep learning approaches – to develop more sophisticated and efficient monitoring techniques. Finally, the developed approaches are applied to monitor many processes, such as waste-water treatment plants, detection of obstacles in driving environments for autonomous robots and vehicles, robot swarm, chemical processes (continuous stirred tank reactor, plug flow rector, and distillation columns), ozone pollution, road traffic congestion, and solar photovoltaic systems. - Uses a data-driven based approach to fault detection and attribution - Provides an in-depth understanding of fault detection and attribution in complex and multivariate systems - Familiarises you with the most suitable data-driven based techniques including multivariate statistical techniques and deep learning-based methods - Includes case studies and comparison of different methods

Download or read book Introduction to Statistical Process Control written by Peihua Qiu and published by CRC Press. This book was released on 2013-10-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major tool for quality control and management, statistical process control (SPC) monitors sequential processes, such as production lines and Internet traffic, to ensure that they work stably and satisfactorily. Along with covering traditional methods, Introduction to Statistical Process Control describes many recent SPC methods that improve upon

Download or read book Issues in Industrial Relations and Management 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Industrial Relations and Management: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Industrial Relations and Management. The editors have built Issues in Industrial Relations and Management: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Industrial Relations and Management in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Industrial Relations and Management: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Bayesian Network written by Ahmed Rebai and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bayesian networks are a very general and powerful tool that can be used for a large number of problems involving uncertainty: reasoning, learning, planning and perception. They provide a language that supports efficient algorithms for the automatic construction of expert systems in several different contexts. The range of applications of Bayesian networks currently extends over almost all fields including engineering, biology and medicine, information and communication technologies and finance. This book is a collection of original contributions to the methodology and applications of Bayesian networks. It contains recent developments in the field and illustrates, on a sample of applications, the power of Bayesian networks in dealing the modeling of complex systems. Readers that are not familiar with this tool, but have some technical background, will find in this book all necessary theoretical and practical information on how to use and implement Bayesian networks in their own work. There is no doubt that this book constitutes a valuable resource for engineers, researchers, students and all those who are interested in discovering and experiencing the potential of this major tool of the century.

Download or read book Design and Modeling of Mechanical Systems III written by Mohamed Haddar and published by Springer. This book was released on 2017-11-25 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Download or read book Case Studies in Bayesian Methods for Biopharmaceutical CMC written by Paul Faya and published by CRC Press. This book was released on 2022-12-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is applied Bayesian methods for chemistry, manufacturing, and control (CMC) studies in the biopharmaceutical industry. The book has multiple authors from industry and academia, each contributing a case study (chapter). The collection of case studies covers a broad array of CMC topics, including stability analysis, analytical method development, specification setting, process development and optimization, process control, experimental design, dissolution testing, and comparability studies. The analysis of each case study includes a presentation of code and reproducible output. This book is written with an academic level aimed at practicing nonclinical biostatisticians, most of whom have graduate degrees in statistics. • First book of its kind focusing strictly on CMC Bayesian case studies • Case studies with code and output • Representation from several companies across the industry as well as academia • Authors are leading and well-known Bayesian statisticians in the CMC field • Accompanying website with code for reproducibility • Reflective of real-life industry applications/problems

Download or read book Statistics for Biotechnology Process Development written by Todd Coffey and published by CRC Press. This book was released on 2018-05-16 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written specifically for biotechnology scientists, engineers, and quality professionals, this book describes and demonstrates the proper application of statistical methods throughout Chemistry, Manufacturing, and Controls (CMC). Filled with case studies, examples, and easy-to-follow explanations of how to perform statistics in modern software, it is the first book on CMC statistics written primarily for practitioners. While statisticians will also benefit from this book, it is written particularly for industry professionals who don’t have access to a CMC statistician or who want to be more independent in the design and analysis of their experiments. Provides an introduction to the statistical concepts important in the biotechnology industry Focuses on concepts with theoretical details kept to a minimum Includes lots of real examples and case studies to illustrate the methods Uses JMP software for implementation of the methods Offers a text suitable for scientists in the industry with some quantitative training Written and edited by seasoned veterans of the biotechnology industry, this book will prove useful to a wide variety of biotechnology professionals. The book brings together individual chapters that showcase the use of statistics in the most salient areas of CMC.

Download or read book Advanced Manufacturing and Automation VIII written by Kesheng Wang and published by Springer. This book was released on 2018-12-14 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding is a compilation of selected papers from the 8th International Workshop of Advanced Manufacturing and Automation (IWAMA 2018), held in Changzhou, China on September 25 - 26, 2018. Most of the topics are focusing on novel techniques for manufacturing and automation in Industry 4.0 and smart factory. These contributions are vital for maintaining and improving economic development and quality of life. The proceeding will assist academic researchers and industrial engineers to implement the concepts and theories of Industry 4.0 in industrial practice, in order to effectively respond to the challenges posed by the 4th industrial revolution and smart factory.

Download or read book Statistics in Industry written by Ravindra Khattree and published by Gulf Professional Publishing. This book was released on 2003-07-18 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents an exposition of topics in industrial statistics. It serves as a reference for researchers in industrial statistics/industrial engineering and a source of information for practicing statisticians/industrial engineers. A variety of topics in the areas of industrial process monitoring, industrial experimentation, industrial modelling and data analysis are covered and are authored by leading researchers or practitioners in the particular specialized topic. Targeting the audiences of researchers in academia as well as practitioners and consultants in industry, the book provides comprehensive accounts of the relevant topics. In addition, whenever applicable ample data analytic illustrations are provided with the help of real world data.

Download or read book Encyclopedia of Operations Research and Management Science written by Saul I. Gass and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operations Research: 1934-1941," 35, 1, 143-152; "British The goal of the Encyclopedia of Operations Research and Operational Research in World War II," 35, 3, 453-470; Management Science is to provide to decision makers and "U. S. Operations Research in World War II," 35, 6, 910-925; problem solvers in business, industry, government and and the 1984 article by Harold Lardner that appeared in academia a comprehensive overview of the wide range of Operations Research: "The Origin of Operational Research," ideas, methodologies, and synergistic forces that combine to 32, 2, 465-475. form the preeminent decision-aiding fields of operations re search and management science (OR/MS). To this end, we The Encyclopedia contains no entries that define the fields enlisted a distinguished international group of academics of operations research and management science. OR and MS and practitioners to contribute articles on subjects for are often equated to one another. If one defines them by the which they are renowned. methodologies they employ, the equation would probably The editors, working with the Encyclopedia's Editorial stand inspection. If one defines them by their historical Advisory Board, surveyed and divided OR/MS into specific developments and the classes of problems they encompass, topics that collectively encompass the foundations, applica the equation becomes fuzzy. The formalism OR grew out of tions, and emerging elements of this ever-changing field. We the operational problems of the British and U. s. military also wanted to establish the close associations that OR/MS efforts in World War II.

Download or read book Unsupervised Process Monitoring and Fault Diagnosis with Machine Learning Methods written by Chris Aldrich and published by Springer Science & Business Media. This book was released on 2013-06-15 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text/reference describes in detail the latest advances in unsupervised process monitoring and fault diagnosis with machine learning methods. Abundant case studies throughout the text demonstrate the efficacy of each method in real-world settings. The broad coverage examines such cutting-edge topics as the use of information theory to enhance unsupervised learning in tree-based methods, the extension of kernel methods to multiple kernel learning for feature extraction from data, and the incremental training of multilayer perceptrons to construct deep architectures for enhanced data projections. Topics and features: discusses machine learning frameworks based on artificial neural networks, statistical learning theory and kernel-based methods, and tree-based methods; examines the application of machine learning to steady state and dynamic operations, with a focus on unsupervised learning; describes the use of spectral methods in process fault diagnosis.