Download or read book Multiscale Problems in Science and Technology written by Nenad Antonic and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International conference on Multiscale problems in science and technol ogy; Challenges to mathematical analysis and applications brought together mathematicians working on multiscale techniques (homogenisation, singular perturbation) and specialists from applied sciences who use these techniques. Our idea was that mathematicians could contribute to solving problems in the emerging applied disciplines usually overlooked by them and that specialists from applied sciences could pose new challenges for multiscale problems. Numerous problems in natural sciences contain multiple scales: flows in complex heterogeneous media, many particles systems, composite media, etc. Mathematically, we are led to study of singular homogenisation limits and the procedure is called upscaling or homogenisation. The processes to be up scaled are usually described by differential equations. For simple cases, when the differential equation is linear and the heterogeneities are periodic some progress has been made. However, most natural phenomena are described by nonlinear differential equations in a random nonhomogeneous medium and, despite an intensive development in recent years, there are many open problems. The objective of the conference was to bring together leading special ists from Europe and the United States and to discuss new challenges in this quickly developing field. Topics of the conference were Nonlinear Partial Differential Equations and Applied Analysis, with direct applications to the modeling in Material Sciences, Petroleum Engineering and Hydrodynamics.

Download or read book Multiscale Modeling and Simulation in Science written by Björn Engquist and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most problems in science involve many scales in time and space. An example is turbulent ?ow where the important large scale quantities of lift and drag of a wing depend on the behavior of the small vortices in the boundarylayer. Another example is chemical reactions with concentrations of the species varying over seconds and hours while the time scale of the oscillations of the chemical bonds is of the order of femtoseconds. A third example from structural mechanics is the stress and strain in a solid beam which is well described by macroscopic equations but at the tip of a crack modeling details on a microscale are needed. A common dif?culty with the simulation of these problems and many others in physics, chemistry and biology is that an attempt to represent all scales will lead to an enormous computational problem with unacceptably long computation times and large memory requirements. On the other hand, if the discretization at a coarse level ignoresthe?nescale informationthenthesolutionwillnotbephysicallymeaningful. The in?uence of the ?ne scales must be incorporated into the model. This volume is the result of a Summer School on Multiscale Modeling and S- ulation in Science held at Boso ¤n, Lidingo ¤ outside Stockholm, Sweden, in June 2007. Sixty PhD students from applied mathematics, the sciences and engineering parti- pated in the summer school.

Download or read book Multiscale Modeling for Process Safety Applications written by Arnab Chakrabarty and published by Butterworth-Heinemann. This book was released on 2015-11-29 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Modeling for Process Safety Applications is a new reference demonstrating the implementation of multiscale modeling techniques on process safety applications. It is a valuable resource for readers interested in theoretical simulations and/or computer simulations of hazardous scenarios. As multi-scale modeling is a computational technique for solving problems involving multiple scales, such as how a flammable vapor cloud might behave if ignited, this book provides information on the fundamental topics of toxic, fire, and air explosion modeling, as well as modeling jet and pool fires using computational fluid dynamics. The book goes on to cover nanomaterial toxicity, QPSR analysis on relation of chemical structure to flash point, molecular structure and burning velocity, first principle studies of reactive chemicals, water and air reactive chemicals, and dust explosions. Chemical and process safety professionals, as well as faculty and graduate researchers, will benefit from the detailed coverage provided in this book. - Provides the only comprehensive source addressing the use of multiscale modeling in the context of process safety - Bridges multiscale modeling with process safety, enabling the reader to understand mapping between problem detail and effective usage of resources - Presents an overall picture of addressing safety problems in all levels of modeling and the latest approaches to each in the field - Features worked out examples, case studies, and a question bank to aid understanding and involvement for the reader

Download or read book GPU Solutions to Multi scale Problems in Science and Engineering written by David A. Yuen and published by Springer Science & Business Media. This book was released on 2013-01-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the new topic of GPU computing with many applications involved, taken from diverse fields such as networking, seismology, fluid mechanics, nano-materials, data-mining , earthquakes ,mantle convection, visualization. It will show the public why GPU computing is important and easy to use. It will offer a reason why GPU computing is useful and how to implement codes in an everyday situation.

Download or read book Practical Multiscaling written by Jacob Fish and published by John Wiley & Sons. This book was released on 2013-09-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Multiscaling covers fundamental modelling techniques aimed at bridging diverse temporal and spatial scales ranging from the atomic level to a full-scale product level. It focuses on practical multiscale methods that account for fine-scale (material) details but do not require their precise resolution. The text material evolved from over 20 years of teaching experience at Rensselaer and Columbia University, as well as from practical experience gained in the application of multiscale software. This book comprehensively covers theory and implementation, providing a detailed exposition of the state-of-the-art multiscale theories and their insertion into conventional (single-scale) finite element code architecture. The robustness and design aspects of multiscale methods are also emphasised, which is accomplished via four building blocks: upscaling of information, systematic reduction of information, characterization of information utilizing experimental data, and material optimization. To ensure the reader gains hands-on experience, a companion website hosting a lite version of the multiscale design software (MDS-Lite) is available. Key features: Combines fundamental theory and practical methods of multiscale modelling Covers the state-of-the-art multiscale theories and examines their practical usability in design Covers applications of multiscale methods Accompanied by a continuously updated website hosting the multiscale design software Illustrated with colour images Practical Multiscaling is an ideal textbook for graduate students studying multiscale science and engineering. It is also a must-have reference for government laboratories, researchers and practitioners in civil, aerospace, pharmaceutical, electronics, and automotive industries, and commercial software vendors.

Download or read book Multicomponent and Multiscale Systems written by Juergen Geiser and published by Springer. This book was released on 2015-08-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the latest research results from combined multi-component and multi-scale explorations. It provides theory, considers underlying numerical methods and presents brilliant computational experimentation. Engineering computations featured in this monograph further offer particular interest to many researchers, engineers and computational scientists working in frontier modeling and applications of multicomponent and multiscale problems. Professor Geiser gives specific attention to the aspects of decomposing and splitting delicate structures and controlling decomposition and the rationale behind many important applications of multi-component and multi-scale analysis. Multicomponent and Multiscale Systems: Theory, Methods and Applications in Engineering also considers the question of why iterative methods can be powerful and more appropriate for well-balanced multiscale and multicomponent coupled nonlinear problems. The book is ideal for engineers and scientists working in theoretical and applied areas.

Download or read book Numerical Methods and Analysis of Multiscale Problems written by Alexandre L. Madureira and published by Springer. This book was released on 2017-02-15 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about numerical modeling of multiscale problems, and introduces several asymptotic analysis and numerical techniques which are necessary for a proper approximation of equations that depend on different physical scales. Aimed at advanced undergraduate and graduate students in mathematics, engineering and physics – or researchers seeking a no-nonsense approach –, it discusses examples in their simplest possible settings, removing mathematical hurdles that might hinder a clear understanding of the methods. The problems considered are given by singular perturbed reaction advection diffusion equations in one and two-dimensional domains, partial differential equations in domains with rough boundaries, and equations with oscillatory coefficients. This work shows how asymptotic analysis can be used to develop and analyze models and numerical methods that are robust and work well for a wide range of parameters.

Download or read book Homogenization Methods For Multiscale Mechanics written by Chiang C Mei and published by World Scientific. This book was released on 2010-09-23 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many physical problems several scales are present in space or time, caused by inhomogeneity of the medium or complexity of the mechanical process. A fundamental approach is to first construct micro-scale models, and then deduce the macro-scale laws and the constitutive relations by properly averaging over the micro-scale. The perturbation method of multiple scales can be used to derive averaged equations for a much larger scale from considerations of the small scales. In the mechanics of multiscale media, the analytical scheme of upscaling is known as the Theory of Homogenization.The authors share the view that the general methods of homogenization should be more widely understood and practiced by applied scientists and engineers. Hence this book is aimed at providing a less abstract treatment of the theory of homogenization for treating inhomogeneous media, and at illustrating its broad range of applications. Each chapter deals with a different class of physical problems. To tackle a new problem, the approach of first discussing the physically relevant scales, then identifying the small parameters and their roles in the normalized governing equations is adopted. The details of asymptotic analysis are only explained afterwards.

Download or read book IUTAM Symposium on Multiscale Problems in Multibody System Contacts written by Peter Eberhard and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of multiscale problems in multibody system contacts is an interesting and timely topic which has been the subject of intensive research. This IUTAM Symposium facilitated discussions between researchers active in the field. This proceedings volume summarizes contributions of many authors active in the field and gives insight in very different areas of this fascinating research. It reviews the state-of-the-art and identifies future hot topics.

Download or read book Integrated Design of Multiscale Multifunctional Materials and Products written by David L. McDowell and published by Butterworth-Heinemann. This book was released on 2009-09-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Design of Multiscale, Multifunctional Materials and Products is the first of its type to consider not only design of materials, but concurrent design of materials and products. In other words, materials are not just selected on the basis of properties, but the composition and/or microstructure iw designed to satisfy specific ranged sets of performance requirements. This book presents the motivation for pursuing concurrent design of materials and products, thoroughly discussing the details of multiscale modeling and multilevel robust design and provides details of the design methods/strategies along with selected examples of designing material attributes for specified system performance. It is intended as a monograph to serve as a foundational reference for instructors of courses at the senior and introductory graduate level in departments of materials science and engineering, mechanical engineering, aerospace engineering and civil engineering who are interested in next generation systems-based design of materials. - First of its kind to consider not only design of materials, but concurrent design of materials and products - Treatment of uncertainty via robust design of materials - Integrates the "materials by design approach" of Olson/Ques Tek LLC with the "materials selection" approach of Ashby/Granta - Distinquishes the processes of concurrent design of materials and products as an overall systems design problem from the field of multiscale modeling - Systematic mathematical algorithms and methods are introduced for robust design of materials, rather than ad hoc heuristics--it is oriented towards a true systems approach to design of materials and products

Download or read book Multiscale Methods in Computational Mechanics written by René de Borst and published by Springer Science & Business Media. This book was released on 2010-10-09 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives a modern, up-to-date account of recent developments in computational multiscale mechanics. Both upscaling and concurrent computing methodologies will be addressed for a range of application areas in computational solid and fluid mechanics: Scale transitions in materials, turbulence in fluid-structure interaction problems, multiscale/multilevel optimization, multiscale poromechanics. A Dutch-German research group that consists of qualified and well-known researchers in the field has worked for six years on the topic of computational multiscale mechanics. This text provides a unique opportunity to consolidate and disseminate the knowledge gained in this project. The addition of chapters written by experts outside this working group provides a broad and multifaceted view of this rapidly evolving field.

Download or read book Advances and Challenges in Pharmaceutical Technology written by Amit Kumar Nayak and published by Academic Press. This book was released on 2021-02-09 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Challenges in Pharmaceutical Technology: Materials, Process Development and Drug Delivery Strategies examines recent advancements in pharmaceutical technology. The book discusses common formulation strategies, including the use of tools for statistical formulation optimization, Quality by design (QbD), process analytical technology, and the uses of various pharmaceutical biomaterials, including natural polymers, synthetic polymers, modified natural polymers, bioceramics, and other bioinorganics. In addition, the book covers rapid advancements in the field by providing a thorough understanding of pharmaceutical processes, formulation developments, explorations, and exploitation of various pharmaceutical biomaterials to formulate pharmaceutical dosage forms. - Provides extensive information and analysis on recent advancements in the field of pharmaceutical technology - Includes contributions from global leaders and experts in academia, industry and regulatory agencies - Uses high quality illustrations, flow charts and tables to explain concepts and text to readers, along with practical examples and research case studies

Download or read book Numerical Homogenization by Localized Decomposition written by Axel Målqvist and published by SIAM. This book was released on 2020-11-23 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first survey of the Localized Orthogonal Decomposition (LOD) method, a pioneering approach for the numerical homogenization of partial differential equations with multiscale data beyond periodicity and scale separation. The authors provide a careful error analysis, including previously unpublished results, and a complete implementation of the method in MATLAB. They also reveal how the LOD method relates to classical homogenization and domain decomposition. Illustrated with numerical experiments that demonstrate the significance of the method, the book is enhanced by a survey of applications including eigenvalue problems and evolution problems. Numerical Homogenization by Localized Orthogonal Decomposition is appropriate for graduate students in applied mathematics, numerical analysis, and scientific computing. Researchers in the field of computational partial differential equations will find this self-contained book of interest, as will applied scientists and engineers interested in multiscale simulation.

Download or read book Multiscale Materials Modeling for Nanomechanics written by Christopher R. Weinberger and published by Springer. This book was released on 2016-08-30 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unique combination of chapters that together provide a practical introduction to multiscale modeling applied to nanoscale materials mechanics. The goal of this book is to present a balanced treatment of both the theory of the methodology, as well as some practical aspects of conducting the simulations and models. The first half of the book covers some fundamental modeling and simulation techniques ranging from ab-inito methods to the continuum scale. Included in this set of methods are several different concurrent multiscale methods for bridging time and length scales applicable to mechanics at the nanoscale regime. The second half of the book presents a range of case studies from a varied selection of research groups focusing either on a the application of multiscale modeling to a specific nanomaterial, or novel analysis techniques aimed at exploring nanomechanics. Readers are also directed to helpful sites and other resources throughout the book where the simulation codes and methodologies discussed herein can be accessed. Emphasis on the practicality of the detailed techniques is especially felt in the latter half of the book, which is dedicated to specific examples to study nanomechanics and multiscale materials behavior. An instructive avenue for learning how to effectively apply these simulation tools to solve nanomechanics problems is to study previous endeavors. Therefore, each chapter is written by a unique team of experts who have used multiscale materials modeling to solve a practical nanomechanics problem. These chapters provide an extensive picture of the multiscale materials landscape from problem statement through the final results and outlook, providing readers with a roadmap for incorporating these techniques into their own research.

Download or read book World Agroforestry Into the Future written by Dennis P. Garrity and published by World Agroforestry Centre. This book was released on 2006 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiscale Modeling Approaches for Composites written by George Chatzigeorgiou and published by Elsevier. This book was released on 2022-01-07 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Modeling Approaches for Composites outlines the fundamentals of common multiscale modeling techniques and provides detailed guidance for putting them into practice. Various homogenization methods are presented in a simple, didactic manner, with an array of numerical examples. The book starts by covering the theoretical underpinnings of tensors and continuum mechanics concepts, then passes to actual micromechanic techniques for composite media and laminate plates. In the last chapters the book covers advanced topics in homogenization, including Green's tensor, Hashin-Shtrikman bounds, and special types of problems. All chapters feature comprehensive analytical and numerical examples (Python and ABAQUS scripts) to better illustrate the theory. - Bridges theory and practice, providing step-by-step instructions for implementing multiscale modeling approaches for composites and the theoretical concepts behind them - Covers boundary conditions, data-exchange between scales, the Hill-Mandel principle, average stress and strain theorems, and more - Discusses how to obtain composite properties using different boundary conditions - Includes access to a companion site, featuring the numerical examples, Python and ABACUS codes discussed in the book

Download or read book Large Scale Scientific Computing written by Ivan Lirkov and published by Springer. This book was released on 2012-05-24 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 8th International Conference on Large-Scale Scientific Computations, LSSC 2011, held in Sozopol, Bulgaria, in June 2011. The 74 revised full papers presented together with 3 plenary and invited papers were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on robust multigrid, multilevel and multiscale, deterministic and stochastic methods for modeling highly heterogeneous media, advanced methods for transport, control and uncertain systems, applications of metaheuristics to large-scale problems, environmental modelling, large scale computing on many-core architectures, multiscale industrial, enviromental and biomedical problems, efficient algorithms of computational geometry, high performance Monte Carlo simulations, voxel based computations and contributed papers.