Download or read book Multiscale Modeling and Simulation of Shock Wave Induced Failure in Materials Science written by Martin Oliver Steinhauser and published by Springer. This book was released on 2018-02-24 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martin Oliver Steinhauser deals with several aspects of multiscale materials modeling and simulation in applied materials research and fundamental science. He covers various multiscale modeling approaches for high-performance ceramics, biological bilayer membranes, semi-flexible polymers, and human cancer cells. He demonstrates that the physics of shock waves, i.e., the investigation of material behavior at high strain rates and of material failure, has grown to become an important interdisciplinary field of research on its own. At the same time, progress in computer hardware and software development has boosted new ideas in multiscale modeling and simulation. Hence, bridging the length and time scales in a theoretical-numerical description of materials has become a prime challenge in science and technology.
Download or read book 28th International Symposium on Shock Waves written by Konstantinos Kontis and published by Springer Science & Business Media. This book was released on 2012-03-14 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Manchester hosted the 28th International Symposium on Shock Waves between 17 and 22 July 2011. The International Symposium on Shock Waves first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW28 focused on the following areas: Blast Waves, Chemically Reacting Flows, Dense Gases and Rarefied Flows, Detonation and Combustion, Diagnostics, Facilities, Flow Visualisation, Hypersonic Flow, Ignition, Impact and Compaction, Multiphase Flow, Nozzle Flow, Numerical Methods, Propulsion, Richtmyer-Meshkov, Shockwave Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shockwave Phenomena and Applications, as well as Medical and Biological Applications. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 28 and individuals interested in these fields.
Download or read book Computational Multiscale Modeling of Fluids and Solids written by Martin Oliver Steinhauser and published by Springer Science & Business Media. This book was released on 2008 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of the book is to provide a comprehensive overview of computational physics methods and techniques, that are used for materials modeling on different length and time scales. Each chapter first provides an overview of the physical basic principles which are the basis for the numerical and mathematical modeling on the respective length-scale. The book includes the micro-scale, the meso-scale and the macro-scale. The chapters follow this classification. The book will explain in detail many tricks of the trade of some of the most important methods and techniques that are used to simulate materials on the perspective levels of spatial and temporal resolution. Case studies are occasionally included to further illustrate some methods or theoretical considerations. Example applications for all techniques are provided, some of which are from the author’s own contributions to some of the research areas. Methods are explained, if possible, on the basis of the original publications but also references to standard text books established in the various fields are mentioned.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiscale Biomechanical Modeling of the Brain written by Mark F. Horstemeyer and published by Elsevier. This book was released on 2021-11-02 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Biomechanical Modeling of the Brain discusses the constitutive modeling of the brain at various length scales (nanoscale, microscale, mesoscale, macroscale and structural scale). In each scale, the book describes the state-of-the- experimental and computational tools used to quantify critical deformational information at each length scale. Then, at the structural scale, several user-based constitutive material models are presented, along with real-world boundary value problems. Lastly, design and optimization concepts are presented for use in occupant-centric design frameworks. This book is useful for both academia and industry applications that cover basic science aspects or applied research in head and brain protection. The multiscale approach to this topic is unique, and not found in other books. It includes meticulously selected materials that aim to connect the mechanistic analysis of the brain tissue at size scales ranging from subcellular to organ levels. Presents concepts in a theoretical and thermodynamic framework for each length scale Teaches readers not only how to use an existing multiscale model for each brain but also how to develop a new multiscale model Takes an integrated experimental-computational approach and gives structured multiscale coverage of the problems
Download or read book IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength written by H. Kitagawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the IUT AM Symposium of "Mesoscopic Dynamics of Fracture Process and Materials Strength", held in July 2003, at the Hotel Osaka Sun Palace, Osaka, Japan. The Symposium was proposed in 2001, aiming at organizing concentrated discussions on current understanding of fracture process and inhomogeneous deformation governing the materials strength with emphasis on the mesoscopic dynamics associated with evolutional mechanical behaviour under micro/macro mutual interaction. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUT AM) to accept our proposal was well-timed and attracted attention. Driven by the development of new theoretical and computational techniques, various novel challenges to investigate the mesoscopic dynamics have been actively done recently, including large-scaled 3D atomistic simulations, discrete dislocation dynamics and other micro/mesoscopic computational analyses. The Symposium attracted sixty-six participants from eight countries, and forty two papers were presented. The presentations comprised a wide variety of fundamental subjects of physics, mechanical models, computational strategies as well as engineering applications. Among the subjects, discussed are (a) dislocation patterning, (b) crystal plasticity, (c) characteristic fracture of amorphous/nanocrystal, (d) nano-indentation, (e) ductile-brittle transition, (f) ab-initio calculation, (g) computational methodology for multi-scale analysis and others.
Download or read book Uncertainty Quantification in Multiscale Materials Modeling written by Yan Wang and published by Woodhead Publishing. This book was released on 2020-03-12 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty Quantification in Multiscale Materials Modeling provides a complete overview of uncertainty quantification (UQ) in computational materials science. It provides practical tools and methods along with examples of their application to problems in materials modeling. UQ methods are applied to various multiscale models ranging from the nanoscale to macroscale. This book presents a thorough synthesis of the state-of-the-art in UQ methods for materials modeling, including Bayesian inference, surrogate modeling, random fields, interval analysis, and sensitivity analysis, providing insight into the unique characteristics of models framed at each scale, as well as common issues in modeling across scales.
Download or read book Blast Injury Science and Engineering written by Anthony M. J. Bull and published by Springer. This book was released on 2016-03-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to help clinicians who seek to conduct science and engineering based research on blast injuries as well as engineers and scientists who seek to apply their expertise to address blast injuries. Blast injuries are prevalent. While the current conflict in Afghanistan is reaching its final stages, the legacy of landmines will sadly ensure that injuries and fatalities will continue to occur. The understanding of these injuries and the science behind their mitigation and treatment is a multi-disciplinary effort. Current knowledge has rapidly grown due to recent conflicts, yet the learning has not yet been captured in any formal way.
Download or read book CRC Concise Encyclopedia of Nanotechnology written by Boris Ildusovich Kharisov and published by CRC Press. This book was released on 2016-01-06 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Concise Encyclopedia of Nanotechnology sets the standard against which all other references of this nature are measured. As such, it is a major resource for both skilled professionals and novices to nanotechnology.The book examines the design, application, and utilization of devices, techniques, and technologies critical to research at the
Download or read book Practical Aspects of Computational Chemistry written by Jerzy Leszczynski and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Practical Aspects of Computational Chemistry" presents contributions on a range of aspects of Computational Chemistry applied to a variety of research fields. The chapters focus on recent theoretical developments which have been used to investigate structures and properties of large systems with minimal computational resources. Studies include those in the gas phase, various solvents, various aspects of computational multiscale modeling, Monte Carlo simulations, chirality, the multiple minima problem for protein folding, the nature of binding in different species and dihydrogen bonds, carbon nanotubes and hydrogen storage, adsorption and decomposition of organophosphorus compounds, X-ray crystallography, proton transfer, structure-activity relationships, a description of the REACH programs of the European Union for chemical regulatory purposes, reactions of nucleic acid bases with endogenous and exogenous reactive oxygen species and different aspects of nucleic acid bases, base pairs and base tetrads.
Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.
Download or read book Challenges in Mechanics of Time Dependent Materials and Processes in Conventional and Multifunctional Materials Volume 2 written by Bonnie Antoun and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2 represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
Download or read book Chemistry at Extreme Conditions written by M.R. Manaa and published by Elsevier. This book was released on 2005-03-02 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry at Extreme Conditions covers those chemical processes that occur in the pressure regime of 0.5–200 GPa and temperature range of 500–5000 K and includes such varied phenomena as comet collisions, synthesis of super-hard materials, detonation and combustion of energetic materials, and organic conversions in the interior of planets. The book provides an insight into this active and exciting field of research. Written by top researchers in the field, the book covers state of the art experimental advances in high-pressure technology, from shock physics to laser-heating techniques to study the nature of the chemical bond in transient processes. The chapters have been conventionally organised into four broad themes of applications: biological and bioinorganic systems; Experimental works on the transformations in small molecular systems; Theoretical methods and computational modeling of shock-compressed materials; and experimental and computational approaches in energetic materials research.* Extremely practical book containing up-to-date research in high-pressure science * Includes chapters on recent advances in computer modelling* Review articles can be used as reference guide
Download or read book Atomistic Simulation of Anistropic Crystal Structures at Nanoscale written by Jia Fu and published by BoD – Books on Demand. This book was released on 2019-05-10 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale simulations of atomistic/continuum coupling in computational materials science, where the scale expands from macro-/micro- to nanoscale, has become a hot research topic. These small units, usually nanostructures, are commonly anisotropic. The development of molecular modeling tools to describe and predict the mechanical properties of structures reveals an undeniable practical importance. Typical anisotropic structures (e.g. cubic, hexagonal, monoclinic) using DFT, MD, and atomic finite element methods are especially interesting, according to the modeling requirement of upscaling structures. It therefore connects nanoscale modeling and continuous patterns of deformation behavior by identifying relevant parameters from smaller to larger scales. These methodologies have the prospect of significant applications. I would like to recommend this book to both beginners and experienced researchers.
Download or read book Statistical Meso Mechanics of Damage and Failure How Microdamage Induces Disaster written by Yilong Bai and published by Springer Nature. This book was released on 2019-09-03 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a trans-scale framework necessary for the physical understanding of breakdown behaviors and presents some new paradigm to clarify the mechanisms underlying the trans-scale processes. The book, which is based on the interaction of mechanics and statistical physics, will help to deepen the understanding of how microdamage induces disaster and benefit the forecasting of the occurrence of catastrophic rupture. It offers notes and problems in each part as interesting background and illustrative exercises. Readers of the book would be graduate students, researchers, engineers working on civil, mechanical and geo-engineering, etc. However, people with various background but interested in disaster reduction and forecasting, like applied physics, geophysics, seismology, etc., may also be interested in the book.
Download or read book Computational Multiscale Modeling of Fluids and Solids written by Martin Oliver Steinhauser and published by Springer Science & Business Media. This book was released on 2007-10-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devastatingly simple, yet hugely effective, the concept of this timely text is to provide a comprehensive overview of computational physics methods and techniques used for materials modeling on different length and time scales. Each chapter first provides an overview of the physical basic principles which are the basis for the numerical and mathematical modeling on the respective length scale. The book includes the micro scale, the meso-scale and the macro scale.
Download or read book Principles of Multiscale Modeling written by Weinan E and published by Cambridge University Press. This book was released on 2011-07-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic discussion of the fundamental principles, written by a leading contributor to the field.
