Download or read book Multiprobe Pressure Analysis and Interpretation written by Tao Lu and published by John Wiley & Sons. This book was released on 2021-04-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A popular 1990s formation tester with a single "pumping" probe and one passive "observation port" displaced 180 deg away, designed to measure pressures at two locations for permeability prediction, encounters well known detection problems at low mobilities. This book, using aerodynamics methods, explains why and also reveals the existence of a wide stagnation zone that hides critical formation details. And it does much more. An exact analytical solution is used to validate a new transient, three-dimensional, finite difference model for more general testers, one that guides new hardware designs with independent azimuthally displaced probes having with different rates, flow schedules and nozzle geometries, supports interpretation and formation evaluation, and assists with job planning at the rigsite. The methods also apply to conventional tools, allowing comparisons between older and newer technologies. Importantly, the authors introduce a completely new three-probe design with independently operable active elements that eliminate all older tool deficiencies. Numerous subjects are discussed, such as pressure transient analyses with multiple operating probes, supercharge analysis with invasion and mudcake buildup, accurate and rapid calculations that allow more than 1,000 simulations per minute, extremely rapid batch mode calculations using convergence acceleration methods, rapid fluid withdrawal with minimal dissolved gas release, dip angle, heterogeneity and anisotropy evaluation, and many other topics. In addition, tool operation sequences, detailed engineering and design functions, field test procedures and laboratory facilities, are discussed and illustrated in photographs that go "behind the scenes" at one of the world’s largest international oil service companies. The book hopes to educate new engineers and veteran engineers alike in hardware and software design at a time when increasing efficiency is crucial and "doing more with less" represents the new norm.
Download or read book Multiprobe Pressure Testing and Reservoir Characterization written by Wilson C Chin and published by Elsevier. This book was released on 2024-04-02 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiprobe Pressure Testing and Reservoir Characterization: Pressure Transient, Contamination, Liquid and Gas Pumping Analysis provides much-needed three-dimensional pressure transient simulators for job planning and data interpretation in well logging. Discussions cover fundamental concepts, present fluid sampling, pressure transient and contamination analysis; physical concepts and numerical approaches; and multiprobe model formulations and validations. Other sections cover four-probe algorithms, including conventional, overbalanced, and underbalanced drilling applications. The final section addresses triple-probe algorithms, which includes coupled models for pressure and contamination convergence acceleration. Notably, a further chapter explains how the multiprobe tool's focus on characterizing permeability will promote better use of the reservoir as well as assist with energy storage in underground rock, demonstrating how multiprobe tools also facilitate the energy transition from fossil fuels to sustainable geothermal energy. - Reviews present day needs, tool operations, and analysis methods, along with numerous practical examples and applications - Develops a suite of mathematical models, algorithms, and software from first principles - Explains, in detail, how multiprobe pressure logging is superior to using conventional sensors because direct, accurate reservoir characteristics support energy-efficient geothermal designs - Provides an alternative look at the investigation of unconventional reservoirs, not only in terms of hydrocarbon production, but also with carbon and energy storage in mind
Download or read book Supercharge Invasion and Mudcake Growth in Downhole Applications written by Wilson Chin and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mysterious "supercharge effects," encountered in formation testing pressure transient analysis, and reservoir invasion, mudcake growth, dynamic filtration, stuck-pipe remediation, and so on, are often discussed in contrasting petrophysical versus drilling contexts. However, these effects are physically coupled and intricately related. The authors focus on a comprehensive formulation, provide solutions for different specialized limits, and develop applications that illustrate how the central ideas can be used in seemingly unrelated disciplines. This approach contributes to a firm understanding of logging and drilling principles. Fortran source code, furnished where applicable, is listed together with recently developed software applications and conveniently summarized throughout the book. In addition, common (incorrect) methods used in the industry are re-analyzed and replaced with more accurate models, which are then used to address challenging field objectives. Sophisticated mathematics is explained in "down to earth" terms, but empirical validations, in this case through Catscan experiments, are used to "keep predictions honest." Similarly, early-time, low mobility, permeability prediction models used in formation testing, several invented by one of the authors, are extended to handle supercharge effects in overbalanced drilling and near-well pressure deficits encountered in underbalanced drilling. These methods are also motivated by reality. For instance, overpressures of 2,000 psi and underpressures near 500 psi are routinely reported in field work, thus imparting a special significance to the methods reported in the book. This new volume discusses old problems and modern challenges, formulates and develops advanced models applicable to both drilling and petrophysical objectives. The presentation focuses on central unifying physical models which are carefully formulated and mathematically solved. The wealth of applications examples and supporting software discussed provides readers with a unified focus behind daily work activities, emphasizing common features and themes rather than unrelated methods and work flows. This comprehensive book is "must" reading for every petroleum engineer.
Download or read book Biofluids Modeling written by Wilson Chin and published by John Wiley & Sons. This book was released on 2023-12-27 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIOFLUIDS MODELING The first book offering analytical and modern computational solutions to important biofluids problems, such as non-Newtonian flows in blood vessels, clogged arteries and veins, bifurcated arteries and veins, arbitrary stent geometries, tissue properties prediction, and porous media Darcy flow simulation in large-scale organ analysis, this is a must-have for any library. This book introduces new methods for biofluids modeling and biological engineering. The foregoing subjects are treated rigorously, with all modeling assumptions stated and solutions clearly derived. But that’s not all. Key supporting physics-based ideas, algorithmic details, and software design interfaces are equally emphasized, in order to support our overriding objective of getting the anatomical and clinical information that physicians need. Importantly, this volume provides a self-contained exposition that includes all required biological concepts, plus the background preparation needed in fluid mechanics, basic differential equations, and modern numerical analysis. The presentation style will appeal to medical practitioners, researchers, biomedical engineers, and students interested in quantitative fluid flow modeling, as well as engineering students eager to learn about advances in a rapidly growing and changing biological science. As such, the book represents “must-reading” suitable at the advanced undergraduate level, and motivated readers should be able to embark on related research following guided study.
Download or read book Pressure Transient Formation and Well Testing written by Fikri J. Kuchuk and published by Elsevier. This book was released on 2010-08-04 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents a comprehensive description of flow through porous media and solutions to pressure diffusion problems in homogenous, layered, and heterogeneous reservoirs. It covers the fundamentals of interpretation techniques for formation tester pressure gradients, and pretests, multiprobe and packer pressure transient tests, including derivative, convolution, and pressure-rate and pressure-pressure deconvolution. Emphasis is placed on the maximum likelihood method that enables one to estimate error variances in pressure data along with the unknown formation parameters. - Serves as a training manual for geologists, petrophysicists, and reservoir engineers on formation and pressure transient testing - Offers interpretation techniques for immediate application in the field - Provides detailed coverage of pretests, multiprobe and packer pressure transient tests, including derivative, convolution, and pressure-rate and pressure-pressure deconvolution
Download or read book Oilfield Review written by and published by . This book was released on 1994 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formation Testing written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2014-02-14 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available for the reservoir or petroleum engineer covering formation testing—with algorithms for wireline and LWD reservoir analysis developed for transient pressure, contamination modeling, permeability, and pore pressure prediction. Traditional well logging methods, such as resistivity, acoustic, nuclear, and NMR, provide indirect information relating to fluid and formation properties. However, the "formation tester" offered in wireline and MWD/LWD operations is different. It collects actual downhole fluid samples for surface analysis, and through pressure transient analysis, provides direct measurements for pore pressure, mobility, permeability, and anisotropy. These are vital to real-time drilling safety, geosteering, hydraulic fracturing, and economic analysis. Methods for formation testing analysis, while commercially important and accounting for a substantial part of service company profits, are shrouded in secrecy. Many are poorly constructed, and because details are not available, industry researchers are not able to improve on them. Formation Testing explains conventional models and develops new, more powerful algorithms for early-time analysis. More importantly, it addresses a critical area in sampling related to "time required to pump clean samples," using rigorous multiphase flow techniques. All of the methods are explained in complete detail. Equations are offered for users to incorporate in their own models, but, for those needing immediate answers, convenient, easy-to-use software is available. The lead author is a well-known petrophysicist with hands-on experience at Schlumberger, Halliburton, BP Exploration, and other companies. His work is used commercially at major oil service companies, and important extensions to his formation testing models have been supported by prestigious grants from the U.S. Department of Energy. His latest collaboration with China National Offshore Oil Corporation marks an important turning point, where advanced simulation models and hardware are evolving side-by-side, defining a new generation of formation testing logging instruments. Providing more than formulations and solutions, this book offers a close look at "behind the scenes" formation tester development, as the China National Offshore Oil Corporation opens up its research, engineering, and manufacturing facilities through a collection of never-before-seen photographs, showing how formation testing tools are developed from start to finish.
Download or read book Journal of Petroleum Technology written by and published by . This book was released on 1994-07 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book North Sea Oil and Gas Reservoirs I written by J. Kleppe and published by Springer. This book was released on 1987-08-31 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Abstracts written by and published by . This book was released on 1994 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Engineering Principles Calculations and Workflows written by Moshood Sanni and published by John Wiley & Sons. This book was released on 2018-10-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein ausführlicher Praxisleitfaden zu Methoden für die Lösung komplexer Probleme in der Erdöltechnik. In der Erdöltechnik dominieren übergreifende wissenschaftliche und mathematische Prinzipien. Allerdings gibt es immer wieder Lücken zwischen Theorie und praktischer Anwendung. Petroleum Engineering: Principles, Calculations, and Workflows stellt Methoden für die Lösung einer Vielzahl praktischer Probleme in der Erdöltechnik vor. Jedes Kapitel beschäftigt sich mit einer spezifischen Problemstellung, beschreibt Formeln zur Erläuterung der primären Prinzipien dieses Problems und zeigt im Anschluss einfach nachvollziehbare Handreichungen für die praktische Anwendung. Hauptmerkmale dieses Bandes: - Fundierter und integrierter Ansatz für die Lösung inverser Probleme. - Ausführliche Untersuchung der Abläufe, einschließlich Modell- und Parametervalidierung. - Einfache Ansätze für die Lösung komplexer mathematischer Probleme. - Komplexe Berechnungen, die sich mit einfachen Methoden leicht implementieren lassen. - Überblick über wichtige Herangehensweisen, die für die Software- und Anwendungsentwicklung notwendig sind. - Formel- und Modellhandreichungen für die Diagnose, erstmalige Parametermodellierung, Simulation und Regression. Petroleum Engineering: Principles, Calculations, and Workflows ist ein wertvolles Referenzwerk für die Praxis und richtet sich an eine breite Zielgruppe: Geowissenschaftler, Explorationsgeologen und Ingenieure. Dieser zugängliche Leitfaden, ein fundiertes Nachschlagewerk für die Lösung alltäglicher Probleme in der Eröltechnik, eignet sich ebenfalls gut für Studenten im Hauptstudium, Postgraduierte, Berater, Softwareentwickler und Berufspraktiker.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1963 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1988 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1993 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Western Regional Meeting written by Society of Petroleum Engineers (U.S.) Western Regional Meeting and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the SPWLA Annual Logging Symposium written by Society of Professional Well Log Analysts and published by . This book was released on 2003 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:
