Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB Second Edition written by Roger W. Pryor Phd and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition includes five new models and explores a wide range of models in coordinate systems from 0D to 3D, introducing the numerical analysis techniques employed in COMSOL 5.6 and MATLAB software. --
Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB written by Roger W. Pryor and published by Mercury Learning and Information. This book was released on 2021-12-03 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMSOL 5 and MATLAB are valuable software modeling tools for engineers and scientists. This updated edition includes five new models and explores a wide range of models in coordinate systems from 0D to 3D, introducing the numerical analysis techniques employed in COMSOL 5.6 and MATLAB software. The text presents electromagnetic, electronic, optical, thermal physics, and biomedical models as examples. It presents the fundamental concepts in the models and the step-by-step instructions needed to build each model. The companion files include all the built models for each step-by-step example presented in the text and the related animations, as specified. The book is designed to introduce modeling to an experienced engineer or can also be used for upper level undergraduate or graduate courses. FEATURES: Focuses on COMSOL 5.x and MATLAB models that demonstrate the use of concepts for later application in engineering, science, medicine, and biophysics for the development of devices and systems Includes companion files with executable copies of each model and related animations Includes detailed discussions of possible modeling errors and results Uses a step-by-step modeling methodology linked to the Fundamental Laws of Physics. The companion files are also available online by emailing the publisher with proof of purchase at [email protected].
Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB written by Roger W. Pryor and published by . This book was released on 2016 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: "COMSOL 5 and MATLAB are valuable software modeling tools for engineers and scientists. This book explores a wide range of models in coordinate systems from 0D to 3D and introduces the numerical analysis techniques employed in COMSOL 5 (including Application Builder) and MATLAB software. The text presents electromagnetic, electronic, optical, thermal physics, and biomedical models as examples. It presents the fundamental concepts in the models and the step-by-step instructions needed to build each model. The book is designed to introduce modeling to an experienced engineer or can also be used for upper level undergraduate or graduate courses." --
Download or read book Multiphysics Modeling Using COMSOL written by Roger Pryor and published by Jones & Bartlett Learning. This book was released on 2011 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Modeling Using COMSOL? rapidly introduces the senior level undergraduate, graduate or professional scientist or engineer to the art and science of computerized modeling for physical systems and devices. It offers a step-by-step modeling methodology through examples that are linked to the Fundamental Laws of Physics through a First Principles Analysis approach. The text explores a breadth of multiphysics models in coordinate systems that range from 1D to 3D and introduces the readers to the numerical analysis modeling techniques employed in the COMSOL? Multiphysics? software. After readers have built and run the examples, they will have a much firmer understanding of the concepts, skills, and benefits acquired from the use of computerized modeling techniques to solve their current technological problems and to explore new areas of application for their particular technological areas of interest.
Download or read book Multiphysics Modeling With Finite Element Methods written by William B J Zimmerman and published by World Scientific Publishing Company. This book was released on 2006-10-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods for approximating partial differential equations that arise in science and engineering analysis find widespread application. Numerical analysis tools make the solutions of coupled physics, mechanics, chemistry, and even biology accessible to the novice modeler. Nevertheless, modelers must be aware of the limitations and difficulties in developing numerical models that faithfully represent the system they are modeling.This textbook introduces the intellectual framework for modeling with Comsol Multiphysics, a package which has unique features in representing multiply linked domains with complex geometry, highly coupled and nonlinear equation systems, and arbitrarily complicated boundary, auxiliary, and initial conditions. But with this modeling power comes great opportunities and great perils.Progressively, in the first part of the book the novice modeler develops an understanding of how to build up complicated models piecemeal and test them modularly. The second part of the book introduces advanced analysis techniques. The final part of the book deals with case studies in a broad range of application areas including nonlinear pattern formation, thin film dynamics and heterogeneous catalysis, composite and effective media for heat, mass, conductivity, and dispersion, population balances, tomography, multiphase flow, electrokinetic, microfluidic networks, plasma dynamics, and corrosion chemistry.As a revision of Process Modeling and Simulation with Finite Element Methods, this book uses the very latest features of Comsol Multiphysics. There are new case studies on multiphase flow with phase change, plasma dynamics, electromagnetohydrodynamics, microfluidic mixing, and corrosion. In addition, major improvements to the level set method for multiphase flow to ensure phase conservation is introduced.
Download or read book Modelling in Science and Engineering written by Marcus Inácio and published by . This book was released on 2019-06-21 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the reader a brief introduction to the COMSOL Multiphysics software tool. Building COMSOL Multiphysics models in 2D or 3D will help students to consolidate their skills by applying basic theory to the real modelling of tasks that in the recent past would require months of programming and dedicated projects to solve a single problem. The examples illustrated in this book include modelling of heat transfer, the migration of a radioactive species in a channel using the Navier-Stokes equations and a chemical heterogenous reactor. These are problems that tend to be rather abstract until such time as a student applies these fundamental equations in practice. Advanced coupling between phenomena in fields such as electromagnetics with others such as heat transfer and computational fluid flow is made easy in COMSOL Multiphysics. A short introduction to the basics, concepts and techniques will allow the reader to progress rapidly and start developing his/her own models. In the second part of this book, some of the models developed in the first part are used to create model applications that can even run on a mobile phone. About the authors: António de Campos Pereira, PhD. in Physics, is an author and consultant. He is a retired researcher from the Dept. of Physics at Stockholm University. Prof. Isabel Paiva, Ph.D. in Chemical Engeneering, is a researcher at C2TN at IST, the School of Engineering of the University of Lisbon. Marcus Inácio has a B.Sc. in Electrotechnical Engineering and is specialising in the field of Medical Physics at KTH, the Royal Institute of Technology in Stockholm, Sweden. Hugo de Campos Pereira is an environmental engineer from Uppsala University and a Ph.D. student specialising in the sorption of highly fluorinated compounds in soils at the Department of Soil and Environment at SLU, the Swedish University of Agricultural Sciences in Uppsala, Sweden.
Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author’s firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book’s accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.
Download or read book Introduction to Integrative Engineering written by Guigen Zhang and published by CRC Press. This book was released on 2017-03-03 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is designed for an introductory course at undergraduate and graduate levels for bioengineering students. It provides a systematic way of examining bioengineering problems in a multidisciplinary computational approach. The book introduces basic concepts of multidiscipline-based computational modeling methods, provides detailed step-by-step techniques to build a model with consideration of underlying multiphysics, and discusses many important aspects of a modeling approach including results interpretation, validation, and assessment.
Download or read book Optical Fiber Communications Systems written by Le Nguyen Binh and published by CRC Press. This book was released on 2010-04-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully structured to provide practical knowledge on fundamental issues, Optical Fiber Communications Systems: Theory and Practice with MATLAB® and Simulink® Models explores advanced modulation and transmission techniques of lightwave communication systems. With coverage ranging from fundamental to modern aspects, the text presents optical communication techniques and applications, employing single mode optical fibers as the transmission medium. With MATLAB and Simulink models that illustrate methods, it supplies a deeper understanding of future development of optical systems and networks. The book begins with an overview of the development of optical fiber communications technology over the last three decades of the 20th century. It describes the optical transmitters for direct and external modulation technique and discusses the detection of optical signals under direct coherent and incoherent reception. The author also covers lumped Er:doped and distributed Roman optical amplifiers with extensive models for the amplification of signals and structuring the amplifiers on the Simulink platform. He outlines a design strategy for optically amplified transmission systems coupled with MATLAB Simulink models, including dispersion and attenuation budget methodology and simulation techniques. The book concludes with coverage of advanced modulation formats for long haul optical fiber transmission systems with accompanied Simulink models. Although many books have been written on this topic over the last two decades, most of them present only the theory and practice of devices and subsystems of the optical fiber communications systems in the fields, but do not illustrate any computer models to represent the true practical aspects of engineering practice. This book fills the need for a text that emphasizes practical computing models that shed light on the behavior and dynamics of the devices.
Download or read book Multiphysics Modeling Using COMSOL 4 written by Roger W. Pryor and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Dynamic Systems with MATLAB and Simulink written by Harold Klee and published by CRC Press. This book was released on 2018-02-02 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous-system simulation is an increasingly important tool for optimizing the performance of real-world systems. The book presents an integrated treatment of continuous simulation with all the background and essential prerequisites in one setting. It features updated chapters and two new sections on Black Swan and the Stochastic Information Packet (SIP) and Stochastic Library Units with Relationships Preserved (SLURP) Standard. The new edition includes basic concepts, mathematical tools, and the common principles of various simulation models for different phenomena, as well as an abundance of case studies, real-world examples, homework problems, and equations to develop a practical understanding of concepts.
Download or read book COMSOL5 for Engineers written by Mehrzad Tabatabaian and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition covers COMSOL5 which now includes a revolutionary tool, the Application Builder. This component enables users to build apps based on COMSOL models that can be run on almost any operating system (Windows, MAC, mobile/iOS, etc.). Designed for engineers from various disciplines, the book introduces multiphysics modeling techniques and examples accompanied by practical applications using COMSOL5.x. The book provides a collection of examples and modeling guidelines through which readers can build their own models. Features: expands the Finite Element Method (FEM) theory and adds more examples from the original edition; outlines the new features in COMSOL5, the graphical user interface (GUI), and how to build a COMSOL app for models; and includes apps for selected model examples-with parameterization of these models. Features new and modified, solved model examples, in addition to the models provided in the original edition. --
Download or read book Introduction to Software for Chemical Engineers written by Mariano Martín Martín and published by CRC Press. This book was released on 2014-07-01 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of chemical engineering is in constant evolution, and access to information technology is changing the way chemical engineering problems are addressed. Inspired by the need for a user-friendly chemical engineering text that demonstrates the real-world applicability of different computer programs, Introduction to Software for Chemical Engineers acquaints readers with the capabilities of various general purpose, mathematical, process modeling and simulation, optimization, and specialized software packages, while explaining how to use the software to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, and process and equipment design and control. Employing nitric acid production, methanol and ammonia recycle loops, and SO2 oxidation reactor case studies and other practical examples, Introduction to Software for Chemical Engineers shows how computer packages such as Excel, MATLAB®, Mathcad, CHEMCAD, Aspen HYSYS®, gPROMS, CFD, DEM, GAMS, and AIMMS are used in the design and operation of chemical reactors, distillation columns, cooling towers, and more. Make Introduction to Software for Chemical Engineers your go-to guide and quick reference for the use of computer software in chemical engineering applications.
Download or read book COMSOL for Engineers written by Mehrzad Tabatabaian and published by Mercury Learning and Information. This book was released on 2014-03-31 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMSOL Multiphysics software is one of the most valuable software modeling tools for engineers and scientists. This book is designed for engineers from the fields of mechanical, electrical, and civil disciplines, and introduces multiphysics modeling techniques and examples accompanied by practical applications using COMSOL 4.x. The book includes a companion CD-ROM with files of over 25 models, images, and code. The main objective is to introduce readers to use COMSOL as an engineering tool for modeling by solving examples that could become a guide for modeling similar or more complicated problems. The objective is to provide a collection of examples and modeling guidelines through which readers can build their own models. Readers are assumed to be familiar with the principles of numerical modeling and the finite element method (FEM). The book takes a flexible-level approach for presenting the materials along with using practical examples. The mathematical fundamentals, engineering principles, and design criteria are presented as integral parts of examples. At the end of each chapter are references that contain more in-depth physics, technical information, and data; these are referred to throughout the book and used in the examples. COMSOL for Engineers could be used to complement another text that provides background training in engineering computations and methods. Examples provided in this book should be considered as "lessons" for which background physics could be explained in more detail. FEATURES Includes a companion CD-ROM with files of over 25 models, images,code Uses progressive approach in terms of examples and models eBook Customers: Companion files are available for downloading with order number/proof of purchase by writing to the publisher at [email protected].
Download or read book Introduction to Software for Chemical Engineers Second Edition written by Mariano Martín Martín and published by CRC Press. This book was released on 2019-06-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Chemical Engineering and its link to computer science is in constant evolution and new engineers have a variety of tools at their disposal to tackle their everyday problems. Introduction to Software for Chemical Engineers, Second Edition provides a quick guide to the use of various computer packages for chemical engineering applications. It covers a range of software applications from Excel and general mathematical packages such as MATLAB and MathCAD to process simulators, CHEMCAD and ASPEN, equation-based modeling languages, gProms, optimization software such as GAMS and AIMS, and specialized software like CFD or DEM codes. The different packages are introduced and applied to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, process and equipment design and control. This new edition offers a wider view of packages including open source software such as R, Python and Julia. It also includes complete examples in ASPEN Plus, adds ANSYS Fluent to CFD codes, Lingo to the optimization packages, and discusses Engineering Equation Solver. It offers a global idea of the capabilities of the software used in the chemical engineering field and provides examples for solving real-world problems. Written by leading experts, this book is a must-have reference for chemical engineers looking to grow in their careers through the use of new and improving computer software. Its user-friendly approach to simulation and optimization as well as its example-based presentation of the software, makes it a perfect teaching tool for both undergraduate and master levels.
Download or read book Modelling Organs Tissues Cells and Devices written by Socrates Dokos and published by Springer. This book was released on 2017-03-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical and practical overview of computational modeling in bioengineering, focusing on a range of applications including electrical stimulation of neural and cardiac tissue, implantable drug delivery, cancer therapy, biomechanics, cardiovascular dynamics, as well as fluid-structure interaction for modelling of organs, tissues, cells and devices. It covers the basic principles of modeling and simulation with ordinary and partial differential equations using MATLAB and COMSOL Multiphysics numerical software. The target audience primarily comprises postgraduate students and researchers, but the book may also be beneficial for practitioners in the medical device industry.
Download or read book MLI Physics Collection written by and published by Mercury Learning and Information. This book was released on 2018-05-10 with total page 5057 pages. Available in PDF, EPUB and Kindle. Book excerpt: This digital collection of twelve book length titles encompasses all of the major subject areas of physics. All twelve titles are combined into one easily downloadable file and are fully-searchable in a Web.pdf, bookmarked, file format. Titles include electromagnetism, particle physics, quantum mechanics, theory of relativity, mathematical methods for physics, computational physics, electrical engineering experiments, multiphysics modeling, solid state physics, radio astronomy, Newtonian mechanics, and physics lab experiments. FEATURES: • Includes 12 full length book titles in one, fully searchable, Web.pdf file • Each book title is preceded by a descriptive page with overview and features • All titles include the complete front matter, text, and end matter from the original printed version • Over 5000 pages of physics information in one file • Complete file downloads in less than two minutes LIST OF TITLES Particle Physics. Robert Purdy, PhD Mathematical Methods for Physics Using MATLAB and Maple. J. Claycomb, PhD The Special Theory of Relativity. Dennis Morris, PhD Computational Physics. Darren Walker, PhD Quantum Mechanics. Dennis Morris, PhD Basic Electromagnetic Theory. James Babington, PhD Physics Lab Experiments. Matthew M. J. French, PhD Newtonian Mechanics. Derek Raine, PhD Solid State Physics. David Schmool, PhD Multiphysics Modeling Using COMSOL5 and MATLAB. R. Pryor, PhD Radio Astronomy. S. Joardar, PhD Electrical Engineering Experiments. G.P. Chhalotra, PhD
