Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB written by Roger W. Pryor and published by . This book was released on 2016 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: "COMSOL 5 and MATLAB are valuable software modeling tools for engineers and scientists. This book explores a wide range of models in coordinate systems from 0D to 3D and introduces the numerical analysis techniques employed in COMSOL 5 (including Application Builder) and MATLAB software. The text presents electromagnetic, electronic, optical, thermal physics, and biomedical models as examples. It presents the fundamental concepts in the models and the step-by-step instructions needed to build each model. The book is designed to introduce modeling to an experienced engineer or can also be used for upper level undergraduate or graduate courses." --
Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB written by Roger W. Pryor and published by Mercury Learning and Information. This book was released on 2021-12-03 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMSOL 5 and MATLAB are valuable software modeling tools for engineers and scientists. This updated edition includes five new models and explores a wide range of models in coordinate systems from 0D to 3D, introducing the numerical analysis techniques employed in COMSOL 5.6 and MATLAB software. The text presents electromagnetic, electronic, optical, thermal physics, and biomedical models as examples. It presents the fundamental concepts in the models and the step-by-step instructions needed to build each model. The companion files include all the built models for each step-by-step example presented in the text and the related animations, as specified. The book is designed to introduce modeling to an experienced engineer or can also be used for upper level undergraduate or graduate courses. FEATURES: Focuses on COMSOL 5.x and MATLAB models that demonstrate the use of concepts for later application in engineering, science, medicine, and biophysics for the development of devices and systems Includes companion files with executable copies of each model and related animations Includes detailed discussions of possible modeling errors and results Uses a step-by-step modeling methodology linked to the Fundamental Laws of Physics. The companion files are also available online by emailing the publisher with proof of purchase at [email protected].
Download or read book Multiphysics Modeling Using COMSOL written by Roger Pryor and published by Jones & Bartlett Learning. This book was released on 2011 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Modeling Using COMSOL? rapidly introduces the senior level undergraduate, graduate or professional scientist or engineer to the art and science of computerized modeling for physical systems and devices. It offers a step-by-step modeling methodology through examples that are linked to the Fundamental Laws of Physics through a First Principles Analysis approach. The text explores a breadth of multiphysics models in coordinate systems that range from 1D to 3D and introduces the readers to the numerical analysis modeling techniques employed in the COMSOL? Multiphysics? software. After readers have built and run the examples, they will have a much firmer understanding of the concepts, skills, and benefits acquired from the use of computerized modeling techniques to solve their current technological problems and to explore new areas of application for their particular technological areas of interest.
Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB Second Edition written by Roger W. Pryor Phd and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition includes five new models and explores a wide range of models in coordinate systems from 0D to 3D, introducing the numerical analysis techniques employed in COMSOL 5.6 and MATLAB software. --
Download or read book Modelling Organs Tissues Cells and Devices written by Socrates Dokos and published by Springer. This book was released on 2017-03-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical and practical overview of computational modeling in bioengineering, focusing on a range of applications including electrical stimulation of neural and cardiac tissue, implantable drug delivery, cancer therapy, biomechanics, cardiovascular dynamics, as well as fluid-structure interaction for modelling of organs, tissues, cells and devices. It covers the basic principles of modeling and simulation with ordinary and partial differential equations using MATLAB and COMSOL Multiphysics numerical software. The target audience primarily comprises postgraduate students and researchers, but the book may also be beneficial for practitioners in the medical device industry.
Download or read book Multiphysics Modeling With Finite Element Methods written by William B J Zimmerman and published by World Scientific Publishing Company. This book was released on 2006-10-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods for approximating partial differential equations that arise in science and engineering analysis find widespread application. Numerical analysis tools make the solutions of coupled physics, mechanics, chemistry, and even biology accessible to the novice modeler. Nevertheless, modelers must be aware of the limitations and difficulties in developing numerical models that faithfully represent the system they are modeling.This textbook introduces the intellectual framework for modeling with Comsol Multiphysics, a package which has unique features in representing multiply linked domains with complex geometry, highly coupled and nonlinear equation systems, and arbitrarily complicated boundary, auxiliary, and initial conditions. But with this modeling power comes great opportunities and great perils.Progressively, in the first part of the book the novice modeler develops an understanding of how to build up complicated models piecemeal and test them modularly. The second part of the book introduces advanced analysis techniques. The final part of the book deals with case studies in a broad range of application areas including nonlinear pattern formation, thin film dynamics and heterogeneous catalysis, composite and effective media for heat, mass, conductivity, and dispersion, population balances, tomography, multiphase flow, electrokinetic, microfluidic networks, plasma dynamics, and corrosion chemistry.As a revision of Process Modeling and Simulation with Finite Element Methods, this book uses the very latest features of Comsol Multiphysics. There are new case studies on multiphase flow with phase change, plasma dynamics, electromagnetohydrodynamics, microfluidic mixing, and corrosion. In addition, major improvements to the level set method for multiphase flow to ensure phase conservation is introduced.
Download or read book Geometry Creation and Import With COMSOL Multiphysics written by Layla S. Mayboudi and published by Mercury Learning and Information. This book was released on 2019-09-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the geometry creation techniques for use in finite element analysis. Examples are provided as a sequence of fin designs with progressively increasing complexity. A fin was selected as it is a feature widely employed for thermal management. As the content progresses, the reader learns to create or import a geometry into a FEM tool using COMSOL Multiphysics®. The fundamentals may also be applied to other commercial packages such as ANSYS® or AbaqusTM. The content can be utilized in a variety of engineering disciplines including mechanical, aerospace, biomedical, chemical, civil, and electrical. The book provides an overview of the tools available to create and interact with the geometry. It also takes a broader look on the world of geometry, showing how geometry is a fundamental part of nature and how it is interconnected with the world around us. Features: Includes example models that enable the reader to implement conceptual material in practical scenarios with broad industrial applications Provides geometry modeling examples created with built in features of COMSOL Multiphysics® v. 5.4 or imported from other dedicated CAD tools Presents meshing examples and provides practical advice on mesh generation Includes companion files with models and custom applications created with COMSOL Multiphysics® Application Builder.
Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author’s firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book’s accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.
Download or read book Modelling in Science and Engineering written by Marcus Inácio and published by . This book was released on 2019-06-21 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the reader a brief introduction to the COMSOL Multiphysics software tool. Building COMSOL Multiphysics models in 2D or 3D will help students to consolidate their skills by applying basic theory to the real modelling of tasks that in the recent past would require months of programming and dedicated projects to solve a single problem. The examples illustrated in this book include modelling of heat transfer, the migration of a radioactive species in a channel using the Navier-Stokes equations and a chemical heterogenous reactor. These are problems that tend to be rather abstract until such time as a student applies these fundamental equations in practice. Advanced coupling between phenomena in fields such as electromagnetics with others such as heat transfer and computational fluid flow is made easy in COMSOL Multiphysics. A short introduction to the basics, concepts and techniques will allow the reader to progress rapidly and start developing his/her own models. In the second part of this book, some of the models developed in the first part are used to create model applications that can even run on a mobile phone. About the authors: António de Campos Pereira, PhD. in Physics, is an author and consultant. He is a retired researcher from the Dept. of Physics at Stockholm University. Prof. Isabel Paiva, Ph.D. in Chemical Engeneering, is a researcher at C2TN at IST, the School of Engineering of the University of Lisbon. Marcus Inácio has a B.Sc. in Electrotechnical Engineering and is specialising in the field of Medical Physics at KTH, the Royal Institute of Technology in Stockholm, Sweden. Hugo de Campos Pereira is an environmental engineer from Uppsala University and a Ph.D. student specialising in the sorption of highly fluorinated compounds in soils at the Department of Soil and Environment at SLU, the Swedish University of Agricultural Sciences in Uppsala, Sweden.
Download or read book Comsol Heat Transfer Models written by Layla S. Mayboudi and published by Multiphysics Modeling. This book was released on 2019-10-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides the reader through the process of model creation for heat transfer analysis with the finite element method. The book describes thermal imaging experiments that demonstrate how such models can be validated. It presents application examples, such as heating water in a kettle, to basement insulation, a heated seat, molten rock, pipe flow, and an innovative extended surface. A companion disc provides the files so models can be run (using COMSOL or other software) in order to observe real-world behavior of the applications. Historical background information is provided to show the progression of heat transfer science and mathematical modeling from the earliest developments to the most recent advances in technology. Features: Includes example models that enable the reader to implement conceptual material in practical scenarios with broad industrial applications Includes companion files with models and geometry files created with COMSOL Multiphysics(R) or imported from a third-party CAD tool.
Download or read book Advanced Structural Analysis with MATLAB written by Srinivasan Chandrasekaran and published by CRC Press. This book was released on 2018-12-07 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building structures are unique in the field of engineering, as they pose challenges in the development and conceptualization of their design. As more innovative structural forms are envisioned, detailed analyses using computer tools are inevitable. This book enables readers to gain an overall understanding of computer-aided analysis of various types of structural forms using advanced tools such as MATLAB®. Detailed descriptions of the fundamentals are explained in a "classroom" style, which will make the content more user-friendly and easier to understand. Basic concepts are emphasized through simple illustrative examples and exercises, and analysis methodologies and guidelines are explained through numerous example problems.
Download or read book Simulation of Dynamic Systems with MATLAB and Simulink written by Harold Klee and published by CRC Press. This book was released on 2018-02-02 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous-system simulation is an increasingly important tool for optimizing the performance of real-world systems. The book presents an integrated treatment of continuous simulation with all the background and essential prerequisites in one setting. It features updated chapters and two new sections on Black Swan and the Stochastic Information Packet (SIP) and Stochastic Library Units with Relationships Preserved (SLURP) Standard. The new edition includes basic concepts, mathematical tools, and the common principles of various simulation models for different phenomena, as well as an abundance of case studies, real-world examples, homework problems, and equations to develop a practical understanding of concepts.
Download or read book Smart Energy Empowerment in Smart and Resilient Cities written by Mustapha Hatti and published by Springer Nature. This book was released on 2019-12-24 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Artificial Intelligence in Renewable Energetic Systems, IC-AIRES2019, 26-28 November 2019, Taghit-Bechar, Algeria. The challenges of the energy transition in the medium term lead to numerous technological breakthroughs in the areas of production, optimal distribution and the rational use of energy and renewable energy (energy efficiency and optimization of consumption, massive electrification, monitoring and control energy systems, cogeneration and energy recovery processes, new and renewable energies, etc.). The fall in the cost of renewable energies and the desire for a local control of energy production are today calling for a profound change in the electricity system. Local authorities are at the center of energy developments by taking into account the local nature of certain energy systems, heat networks, geothermal energy, waste heat recovery, and electricity generation from household waste. On the other side, digital sciences are at the heart of connected objects and intelligent products that combine information processing and communication capabilities with their environment. Digital technology is at the center of new systems engineering approaches (3D modeling, virtualization, simulation, digital prototyping, etc.) for the design and development of intelligent systems. The book deals with various topics ranging from the design, development and maintenance of energy production systems, transport, distribution or storage of energy, optimization of energy efficiency, especially in the use of energy. innovation in the fields of energy production from renewable energies, management of energy networks: electricity, fluids, gas, district heating, energy storage modes: battery, super-capacitors , overseeing energy supply through supervision, control and diagnosis, risk management, as well as the design and management of smart grids: microgrid, smartgrid. This imposes the model of energy empowerment in the advent of smart cities. Empower the world’s most vulnerable energy-poor citizens and establish growing and vibrant socioeconomic communities, by academics, students in engineering and data computing from around the world who have chosen an academic path leading to an electric power and energy engineering and artificial intelligence to advancing technology for the advantage of humanity.
Download or read book Multiphysics Simulation written by Ercan M. Dede and published by Springer. This book was released on 2014-05-28 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a unique combination of numerical tools and strategies for handling the challenges of multiphysics simulation, with a specific focus on electromechanical systems as the target application. Features: introduces the concept of design via simulation, along with the role of multiphysics simulation in today’s engineering environment; discusses the importance of structural optimization techniques in the design and development of electromechanical systems; provides an overview of the physics commonly involved with electromechanical systems for applications such as electronics, magnetic components, RF components, actuators, and motors; reviews the governing equations for the simulation of related multiphysics problems; outlines relevant (topology and parametric size) optimization methods for electromechanical systems; describes in detail several multiphysics simulation and optimization example studies in both two and three dimensions, with sample numerical code.
Download or read book Introduction to Integrative Engineering written by Guigen Zhang and published by CRC Press. This book was released on 2017-03-03 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is designed for an introductory course at undergraduate and graduate levels for bioengineering students. It provides a systematic way of examining bioengineering problems in a multidisciplinary computational approach. The book introduces basic concepts of multidiscipline-based computational modeling methods, provides detailed step-by-step techniques to build a model with consideration of underlying multiphysics, and discusses many important aspects of a modeling approach including results interpretation, validation, and assessment.
Download or read book MLI Physics Collection written by and published by Mercury Learning and Information. This book was released on 2018-05-10 with total page 5000 pages. Available in PDF, EPUB and Kindle. Book excerpt: This digital collection of twelve book length titles encompasses all of the major subject areas of physics. All twelve titles are combined into one easily downloadable file and are fully-searchable in a Web.pdf, bookmarked, file format. Titles include electromagnetism, particle physics, quantum mechanics, theory of relativity, mathematical methods for physics, computational physics, electrical engineering experiments, multiphysics modeling, solid state physics, radio astronomy, Newtonian mechanics, and physics lab experiments. FEATURES: • Includes 12 full length book titles in one, fully searchable, Web.pdf file • Each book title is preceded by a descriptive page with overview and features • All titles include the complete front matter, text, and end matter from the original printed version • Over 5000 pages of physics information in one file • Complete file downloads in less than two minutes LIST OF TITLES Particle Physics. Robert Purdy, PhD Mathematical Methods for Physics Using MATLAB and Maple. J. Claycomb, PhD The Special Theory of Relativity. Dennis Morris, PhD Computational Physics. Darren Walker, PhD Quantum Mechanics. Dennis Morris, PhD Basic Electromagnetic Theory. James Babington, PhD Physics Lab Experiments. Matthew M. J. French, PhD Newtonian Mechanics. Derek Raine, PhD Solid State Physics. David Schmool, PhD Multiphysics Modeling Using COMSOL5 and MATLAB. R. Pryor, PhD Radio Astronomy. S. Joardar, PhD Electrical Engineering Experiments. G.P. Chhalotra, PhD
Download or read book System Dynamics for Engineering Students written by Nicolae Lobontiu and published by Academic Press. This book was released on 2017-08-29 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering system dynamics focuses on deriving mathematical models based on simplified physical representations of actual systems, such as mechanical, electrical, fluid, or thermal, and on solving these models for analysis or design purposes. System Dynamics for Engineering Students: Concepts and Applications features a classical approach to system dynamics and is designed to be utilized as a one-semester system dynamics text for upper-level undergraduate students with emphasis on mechanical, aerospace, or electrical engineering. It is the first system dynamics textbook to include examples from compliant (flexible) mechanisms and micro/nano electromechanical systems (MEMS/NEMS). This new second edition has been updated to provide more balance between analytical and computational approaches; introduces additional in-text coverage of Controls; and includes numerous fully solved examples and exercises. Features a more balanced treatment of mechanical, electrical, fluid, and thermal systems than other texts Introduces examples from compliant (flexible) mechanisms and MEMS/NEMS Includes a chapter on coupled-field systems Incorporates MATLAB® and Simulink® computational software tools throughout the book Supplements the text with extensive instructor support available online: instructor's solution manual, image bank, and PowerPoint lecture slides NEW FOR THE SECOND EDITION Provides more balance between analytical and computational approaches, including integration of Lagrangian equations as another modelling technique of dynamic systems Includes additional in-text coverage of Controls, to meet the needs of schools that cover both controls and system dynamics in the course Features a broader range of applications, including additional applications in pneumatic and hydraulic systems, and new applications in aerospace, automotive, and bioengineering systems, making the book even more appealing to mechanical engineers Updates include new and revised examples and end-of-chapter exercises with a wider variety of engineering applications
