Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students.* Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics

Download or read book Multiphase Flow written by Peter Vorobieff and published by WIT Press. This book was released on 2018-04-18 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selected papers contained in this book present the latest research in one of the most challenging, yet most universally applicable areas of technology. Multiphase flows are found in all areas of technology and the range of related problems of interest is vast, including many areas of science and engineering. Recently multiphase fluid dynamics have generated a great deal of attention, leading to many notable advances in experimental, analytical and numerical studies. It is perhaps, however, work on numerical solutions which is the most noticeable owing to the continuing improvements in computer software tools. Progress in numerical methods has permitted the solution of many practical problems, helping to improve our understanding of the physics involved. The presented papers illustrate the close interaction between numerical modellers and researchers working to gradually resolve the many outstanding issues in our understanding of multiphase flow.

Download or read book Ultrasonic Doppler Velocity Profiler for Fluid Flow written by Yasushi Takeda and published by Springer Science & Business Media. This book was released on 2012-08-31 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultrasonic velocity profile (UVP) method, first developed in medical engineering, is now widely used in clinical settings. The fluid mechanical basis of UVP was established in investigations by the author and his colleagues with work demonstrating that UVP is a powerful new tool in experimental fluid mechanics. There are diverse examples, ranging from problems in fundamental fluid dynamics to applied problems in mechanical, chemical, nuclear, and environmental engineering. In all these problems, the methodological principle in fluid mechanics was converted from point measurements to spatio-temporal measurements along a line. This book is the first monograph on UVP that offers comprehensive information about the method, its principles, its practice, and applied examples, and which serves both current and new users. Current users can confirm that their application configurations are correct, which will help them to improve the configurations so as to make them more efficient and effective. New users will become familiar with the method, to design applications on a physically correct basis for performing measurements accurately. Additionally, the appendix provides necessary practical information, such as acoustic properties.

Download or read book Multiphase Flow The Ultimate Measurement Challenge written by Xiaoshu Cai and published by American Institute of Physics. This book was released on 2007-07-02 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed papers presented at the 5th International Symposium on Measurement Techniques for Multiphase Flows and 2nd International Workshop on Process Tomography. This symposium covers a wide scope of multiphase measurements including measurements. Advanced methods and recent researching developments in these fields are submitted for academic communication and discussion.

Download or read book Multiphase Flow Handbook written by Clayton T. Crowe and published by CRC Press. This book was released on 2005-09-19 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the importance of multiphase flows in a wide variety of industries, including power, petroleum, and numerous processing industries, an understanding of the behavior and underlying theoretical concepts of these systems is critical. Contributed by a team of prominent experts led by a specialist with more than thirty years of experience, the Multiphase Flow Handbook provides such an understanding, and much more. It covers all aspects of multiphase flows, from fundamentals to numerical methods and instrumentation. The book begins with an introduction to the fundamentals of particle/fluid/bubble interactions followed by gas/liquid flows and methods for calculating system parameters. It includes up-to-date information on practical industrial applications such as boiling and condensation, fluidized beds, aerosols, separation systems, pollution control, granular and porous media flow, pneumatic and slurry transport, and sprays. Coverage then turns to the most recent information on particle/droplet-fluid interactions, with a chapter devoted to microgravity and microscale flows and another on basic multiphase interactions. Rounding out the presentation, the authors discuss numerical methods, state-of-the art instrumentation, and advanced experimental techniques. Supplying up-to-date, authoritative information on all aspects of multiphase flows along with numerous problems and examples, the Multiphase Flow Handbook is the most complete reference available for understanding the flow of multiphase mixtures.

Download or read book Acoustic Fields and Waves in Solids written by Bertram Alexander Auld and published by . This book was released on 1990 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling and Solution Techniques for Multiphase Flow written by Alan Victor Jones and published by CRC Press. This book was released on 1987 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials presented at the Inspra-Courses Seminar held in Inspra, Italy, Nov. 1985 provide general principles and applications for the appreciation of the similarities and differences in the approaches taken. An explanation of the physical nature of the particular multiphase flow application is followed by a presentation of the model adopted, emphasizing its distinguishing features. The technique employed for the numerical solution is discussed, usually supported by numerical results. No index. Book club price $117. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Industrial Surfactants written by Ernest W. Flick and published by William Andrew. This book was released on 2012-12-02 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this useful book describes almost 2900 surfactants which are currently available for industrial use. The book will be of value to technical and managerial personnel involved in the specification and use of these products. The information has been developed directly from information received from 46 surfactant suppliers. Industrial surfactants find uses in almost every industry, from asphalt manufacturing to carpet fibers, from pulp and paper production to leather processing. Examples of the types of chemicals used as surfactants are fatty alcohol sulfates, alkanolamides, alkoxylates, sulfosuccinates, amines, quaternaries, phosphate esters, acid esters, block copolymers, betaines, imidazolines, alkyl sulfonates, etc.

Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2012 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"

Download or read book Flow Measurement Handbook written by Roger C. Baker and published by Cambridge University Press. This book was released on 2016-08-25 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow Measurement Handbook is a reference for engineers on flow measurement techniques and instruments. It strikes a balance between laboratory ideas and the realities of field experience and provides practical advice on design, operation and performance of flowmeters. It begins with a review of essentials: accuracy, flow, selection and calibration methods. Each chapter is then devoted to a flowmeter class and includes information on design, application installation, calibration and operation. Among the flowmeters discussed are differential pressure devices such as orifice and Venturi, volumetric flowmeters such as positive displacement, turbine, vortex, electromagnetic, magnetic resonance, ultrasonic, acoustic, multiphase flowmeters and mass meters, such as thermal and Coriolis. There are also chapters on probes, verification and remote data access.

Download or read book Measuring Techniques in Gas Liquid Two Phase Flows written by J.M. Delhaye and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.

Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.

Download or read book Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow written by S. Hernández and published by WIT Press. This book was released on 2021-08-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of fluid mechanics is vast and has numerous and diverse applications. Presented papers from the 11th International Conference on Advances in Fluid Dynamics with emphasis on Multiphase and Complex Flow are contained in this book and cover a wide range of topics, including basic formulations and their computer modelling as well as the relationship between experimental and analytical results. Innovation in fluid-structure approaches including emerging applications as energy harvesting systems, studies of turbulent flows at high Reynold number, or subsonic and hypersonic flows are also among the topics covered. The emphasis placed on multiphase flow in the included research works is due to the fact that fluid dynamics processes in nature are predominantly multi-phased, i.e. involving more than one phase of a component such as liquid, gas or plasma. The range of related problems of interest is vast: astrophysics, biology, geophysics, atmospheric processes, and a large variety of engineering applications. Multiphase fluid dynamics are generating a great deal of interest, leading to many notable advances in experimental, analytical, and numerical studies in this area. While progress is continuing in all three categories, advances in numerical solutions are likely the most conspicuous, owing to the continuing improvements in computer power and the software tools available to researchers. Progress in numerical methods has not only allowed for the solution of many practical problems but also helped to improve our understanding of the physics involved. Many unresolved issues are inherent in the very definition of multiphase flow, where it is necessary to consider coupled processes on multiple scales, as well as the interplay of a wide variety of relevant physical phenomena.

Download or read book Non Invasive Monitoring of Multiphase Flows written by J. Chaouki and published by Elsevier. This book was released on 1997-01-15 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Invasive Monitoring of Multiphase Flows is a result of the latest advances realized in non-invasive measurement of multiphase systems by means of various tomographic and velocimetric techniques. Written by experts on special topics within the realm of this subject, the book reviews in 15 chapters the theoretical background and the physics of the measurement process for each of a number of techniques. In addition, the mathematical modeling related to the measured property, such as in the image reconstitution problem for tomography, successful application of the techniques for measurement in various multiphase systems and their advantages and limitations are described. Features of this book: - Comprehensive and Complete. Covers both theoretical and application viewpoints of noninvasive measuring techniques in multiphase systems. There is no book available on this subject in the field of multiphase flows - Versatile. Material is presented in such a way that the book can be used either for research or for teaching graduate students specializing in the topic of multiphase flows - Awareness and Uniformity. The engineering community is made aware of advantages of these new techniques and they are presented in a uniform package. The editors strive to provide a comprehensive compendium of all the relevant information essential for practising engineers, consultants, university professors, graduate students and technicians who are involved in the study of multiphase flow phenomena. The book, although directed to the study of multiphase systems of interest to the chemical engineer, also provides valuable information for all other engineering disciplines that deal with multiphase systems.

Download or read book Flow Measurement Handbook written by R. C. Baker and published by Cambridge University Press. This book was released on 2000-05-29 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, comprehensive advice on the design, operation, and performance of flowmeters.

Download or read book Industrial Tomography written by Mi Wang and published by Woodhead Publishing. This book was released on 2022-05-07 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Tomography: Systems and Applications, Second Edition thoroughly explores the important techniques of industrial tomography, also discusses image reconstruction, systems, and applications. This book presents complex processes, including the way three-dimensional imaging is used to create multiple cross-sections, and how computer software helps monitor flows, filtering, mixing, drying processes, and chemical reactions inside vessels and pipelines. This book is suitable for materials scientists and engineers and applied physicists working in the photonics and optoelectronics industry or in the applications industries. - Provides a comprehensive discussion on the different formats of tomography, including advances in visualization and data fusion - Includes an excellent overview of image reconstruction using a wide range of applications - Presents a comprehensive discussion of tomography systems and their applications in a wide variety of industrial processes

Download or read book List of BPO Publications written by Bartlesville Project Office and published by . This book was released on 1993 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: