Download or read book Multi Stage Simultaneous Lot Sizing and Scheduling written by Florian Seeanner and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​Due to a varying product demand (changing product mix) and different production speeds, bottlenecks may shift between the stages. In that case, a simultaneous lot-sizing and scheduling of these stages is recommendable. Hence, an improved version of the General Lot-Sizing and Scheduling Problem for Multiple production Stages (GLSPMS) was developed. Moreover, several reformulation techniques were applied to this model to solve it exactly. Besides, a new meta-heuristic which combines the principles of Variable Neighborhood Decomposition Search (VNDS) and Exchange was implemented to find good solutions, even for a real-world problem case. Finally, further model extensions, e.g., for scarce setup resources, were proposed.

Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.

Download or read book Dynamic Perspectives on Managerial Decision Making written by Herbert Dawid and published by Springer. This book was released on 2016-09-15 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects research papers addressing topical issues in economics and management with a particular focus on dynamic models which allow to analyze and foster the decision making of firms in dynamic complex environments. The scope of the contributions ranges from daily operational challenges firms face to strategic choices in dynamic industry environments and the analysis of optimal growth paths. The volume also highlights recent methodological developments in the areas of dynamic optimization, dynamic games and meta-heuristics, which help to improve our understanding of (optimal) decision making in a fast evolving economy.

Download or read book Multi Level Capacitated Lotsizing with Setup Carryover written by Lisbeth Buschkühl and published by Springer. This book was released on 2019-02-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lotsizing problems are found in every company, which produces various items on resources with scarce capacities. In general, the objective is to find production plans, which meet demand with the resources` given capacities and at minimal costs. However, there is a great variety of company-specific lotsizing problems due to the complexity of the underlying production processes. Both standard MRP-systems and modern Advanced Planning Systems fail to provide adequate solutions. Instead, they most often compute production plans, which are not feasible in practice. In this book new lotsizing models are presented for multi-stage production systems with general product structures, dynamic demand, setup times and lead times. They are extended to cover production on parallel machines. An iterative solution procedure is presented, which generates feasible production plans within seconds of computation time. Potential readership includes scholars of supply chain management and production planning, interested students in these areas as well as practitioners involved in production planning.

Download or read book Metaheuristics for Scheduling in Industrial and Manufacturing Applications written by Fatos Xhafa and published by Springer. This book was released on 2008-08-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decades scheduling has been among the most studied op- mization problemsanditisstillanactiveareaofresearch!Schedulingappears in many areas of science, engineering and industry and takes di?erent forms depending on the restrictions and optimization criteria of the operating en- ronments [8]. For instance, in optimization and computer science, scheduling has been de?ned as “the allocation of tasks to resources over time in order to achieve optimality in one or more objective criteria in an e?cient way” and in production as “production schedule, i. e. , the planning of the production or the sequence of operations according to which jobs pass through machines and is optimal with respect to certain optimization criteria. ” Although there is a standardized form of stating any scheduling problem, namely “e?cient allocation ofn jobs onm machines –which can process no more than one activity at a time– with the objective to optimize some - jective function of the job completion times”, scheduling is in fact a family of problems. Indeed, several parameters intervene in the problem de?nition: (a) job characteristics (preemptive or not, precedence constraints, release dates, etc. ); (b) resource environment (single vs. parallel machines, un- lated machines, identical or uniform machines, etc. ); (c) optimization criteria (minimize total tardiness, the number of late jobs, makespan, ?owtime, etc. ; maximize resource utilization, etc. ); and, (d) scheduling environment (static vs. dynamic,intheformerthenumberofjobstobeconsideredandtheirready times are available while in the later the number of jobs and their charact- istics change over time).

Download or read book Lotsizing and Scheduling for Production Planning written by Knut Haase and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Billions of dollars are tied up in the inventories of manufacturing companies which cause large (interest) costs. A small decrease of the inventory and/or production costs without reduction of the service level can increase the profit substantially. Especially in the case of scarce capacity, efficient production schedules are fundamental for short delivery time and on-time delivery which are important competitive priorities. To support decision makers by improving their manufacturing resource planning system with appropriate methods is one of the most of production planning. interesting challenges The following chapters contain new models and new solution strategies which may be helpful for decision makers and for further research in the areas of production planning and operations research. The main subject is on lotsizing and scheduling. The objectives and further characteristics of such problems can be inferred from practical need. Thus, before an outline is given, we consider the general objectives of lotsizing and scheduling and classify the most important characteristics of such problems in the following sections.

Download or read book Closing the Gap Between Practice and Research in Industrial Engineering written by Elisabeth Viles and published by Springer. This book was released on 2017-08-17 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XXII International Conference on Industrial Engineering and Operations Management, International IIE Conference 2016, and International AIM Conference 2016. This joint conference is a result of an agreement between ADINGOR (Asociación para el Desarrollo de la Ingeniería de Organización), ABEPRO (Associação Brasileira de Engenharia de Produção), AIM (European Academy for Industrial Management) and the IIE (Institute of Industrial Engineers), and took place at TECNUN-School of Engineering (San Sebastián, Spain) from July 13th to 15th, 2016. The book includes the latest research advances and cutting-edge analyses of real case studies in Industrial Engineering and Operations Management from diverse international contexts, while also identifying concrete business applications for the latest findings and innovations in operations management and the decisions sciences.

Download or read book 27th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2017-09-21 with total page 3064 pages. Available in PDF, EPUB and Kindle. Book excerpt: 27th European Symposium on Computer Aided Process Engineering, Volume 40 contains the papers presented at the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Barcelona, October 1-5, 2017. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event

Download or read book Lot Sizing and Scheduling for Flexible Flow Lines written by Daniel Quadt and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book considers the lot-sizing and scheduling problem for flexible flow line production facilities. Flexible flow lines are flow lines with parallel machines on some or all production stages. They can be found in a vast number of industries. A three-phased solution approach is presented that solves the integrated lot-sizing and scheduling problem in a hierarchical manner. The approach is able to handle several important features relevant in industrial practice, such as back-orders and setup carry-over. The developed solution procedures solve practically sized problems in a relatively short amount of time. One of the procedures is based on a novel mixed integer programming (MIP) model, which employs integer variables instead of binary variables. This makes it possible to find (near-)optimal solutions using standard algorithms such as CPLEX. Another procedure uses two nested Genetic Algorithms. An application of the framework in the semiconductor industry is given.

Download or read book Integer Programming and Related Areas written by Rabe v. Randow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields of integer programming and combinatorial optimization continue to be areas of great vitality, with an ever increasing number of publications and journals appearing. A classified bibliography thus continues to be necessary and useful today, even more so than it did when the project, of which this is the fifth volume, was started in 1970 in the Institut fur Okonometrie und Operations Research of the University of Bonn. The pioneering first volume was compiled by Claus Kastning during the years 1970 - 1975 and appeared in 1976 as Volume 128 of the series Lecture Notes in Economics and Mathematical Systems published by the Springer Verlag. Work on the project was continued by Dirk Hausmann, Reinhardt Euler, and Rabe von Randow, and resulted in the publication of the second, third, and fourth volumes in 1978, 1982, and 1985 (Volumes 160, 197, and 243 of the above series). The present book constitutes the fifth volume of the bibliography and covers the period from autumn 1984 to the end of 1987. It contains 5864 new publications by 4480 authors and was compiled by Rabe von Randow. Its form is practically identical to that of the first four volumes, some additions having been made to the subject list.

Download or read book Beyond Manufacturing Resource Planning MRP II written by Andreas Drexl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The logic of Manufacturing Resource Planning (MRP II) is im plemented in most commercial production planning software tools and is commonly accepted by practitioners. However, these peo ple are not satisfied with production planning and complain about long lead times, high work-in-process, and backlogging. As many researchers have pointed out, the reason for these shortcomings is inherent to the methods that are used. The research community is thus eager to find more sophisticated approaches. This book is an attempt to compile some state-of-the-art work in the field of production planning research. It includes mate rial that somehow dominates the existing MRP II concept. 15 ar ticles written by 36 authors from 10 countries cover many aspects related to MRP II. All papers went through a single-blind refere eing process before they were selected for being published in this book. When we received papers for this issue, we discovered that MRP II is a topic about which not only management scientists show interest. As the list of authors proves, industrial engineers, computer scientists, and-operations researchers from academia as well as practitioners have contributed to this book. This, we hope, makes the book of value for a broad audience. We thank all authors who submitted papers. And, we are in debted to Dr. Werner Muller from Springer for his support in this book project.

Download or read book Synthesis Design and Resource Optimization in Batch Chemical Plants written by Thokozani Majozi and published by CRC Press. This book was released on 2015-03-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manner in which time is captured forms the foundation for synthesis, design, and optimization in batch chemical plants. However, there are still serious challenges with handling time in batch plants. Most techniques tend to assume either a fixed time dimension or adopt time average models to tame the time dimension, thereby simplifying the resu

Download or read book Inventory and Production Management in Supply Chains written by Edward A. Silver and published by CRC Press. This book was released on 2016-12-19 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a team of experts, the new edition of this bestseller presents practical techniques for managing inventory and production throughout supply chains. It covers the current context of inventory and production management, replenishment systems for managing individual inventories within a firm, managing inventory in multiple locations and firms, and production management. The book presents sophisticated concepts and solutions with an eye towards today’s economy of global demand, cost-saving, and rapid cycles. It explains how to decrease working capital and how to deal with coordinating chains across boundaries.

Download or read book Deterministic Lotsizing Models for Production Planning written by Marc Salomon and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with timing and sizing decisions for production lots, and more precisely, with mathematical models to support optimal tim ing and sizing decisions. These models are called lotsizing models. They are characterized by the fact that production lots are determined based on a trade-offbetween production costs and customer service. Production costs can be categorized as basic production costs, which consist of material costs, labour costs, machine startup costs and over head costs, and inventory related costs, which include costs of capital tied up in inventory, insurances and taxes. Customer service is the capability of the firm to deliver to their clients the products in the quantity they ordered at the agreed upon time and place. The costs of realizing a certain service level are usuaIly very dif ficult to convert into money. They include costs of expediting, loss of customer goodwill, and loss of sales revenues resulting from the short age situation.

Download or read book Computational Logistics written by Carlos Paternina-Arboleda and published by Springer Nature. This book was released on 2019-09-20 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 10th International Conference on Computational Logistics, ICCL 2019, held in Barranquilla, Colombia, in September/October 2019. The 27 papers included in this book were carefully reviewed and selected from 49 submissions. They were organized in topical sections named: freight transportation and urban logistics; maritime and port logistics; vehicle routing problems; network design and distribution problems; and selected topics in decision support systems and ICT tools.

Download or read book Operations Research Proceedings 2016 written by Andreas Fink and published by Springer. This book was released on 2017-07-20 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a selection of refereed papers presented at the "Annual International Conference of the German Operations Research Society (OR2016)," which took place at the Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg, Germany, Aug. 30 - Sept. 2, 2016. Over 700 practitioners and academics from mathematics, computer science, business/economics, and related fields attended the conference. The scientific program included around 475 presentations on the theme Analytical Decision Making, focusing on the process of researching complex decision problems and devising effective solution methods towards better decisions. The book presents papers discussing classical mathematical optimization, statistics and simulation techniques. Such approaches are complemented by computer science methods and tools for the processing of data and the design and implementation of information systems. The book also examines recent advances in information technology, which allow big data volumes to be treated and enable real-time predictive and prescriptive business analytics to drive decisions and actions. Further, it includes problems modeled and treated under consideration of uncertainty, risk management, behavioral issues, and strategic decision situations.

Download or read book Stochastic Dynamic Lot Sizing in Supply Chains written by Timo Jannis Hilger and published by BoD – Books on Demand. This book was released on 2015-10-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companies frequently operate in an uncertain environment and many real life production planning problems imply volatility and stochastics of the customer demands. Thereby, the determination of the lot-sizes and the production periods significantly affects the profitability of a manufacturing company and the service offered to the customers. This thesis provides practice-oriented formulations and variants of dynamic lot-sizing problems in presence of restricted production resources and demand uncertainty. The demand fulfillment is regulated by service level constraints. Additionally, integrated production and remanufacturing planning under demand and return uncertainty in closed-loop supply chains is addressed. This book offers introductions to these problems and presents approximation models that can be applied under uncertainty. Comprehensive numerical studies provide managerial implications. The book is written for practitioners interested in supply chain management and production as well as for lecturers and students in business studies with a focus on supply chain management and operations management.