Download or read book Multi Stage Production Planning and Inventory Control written by Sven Axsäter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper treats a two-echelon inventory system. The higher echelon is a single location reffered to as the depot, which places orders for supply of a single com modity. The lower echelon consists of several points, called the retailers, which are supplied by shipments from the depot, and at which random demands for the item occur. Stocks are reviewed and decisions are made periodically. Orders and/or shipments may each require a fixed lead time before reaching their respective desti nations. Section II gives a short literature review of distribution research. Section III introduces the multi-echelon distribution system together with the underlying as sumptions and gives a description of how this problem can be viewed as a Markovian Decision Process. Section IV discusses the concept of cost modifications in a distribution context. Section V presents the test-examples together with their optimal solutions and also gives the characteristic properties of these optimal solutions. These properties then will be used in section VI to give adapted ver sions of various heuristics which were used in assembly experiments previously and which will be tested against the test-examples.

Download or read book Multi level Production inventory Control Systems written by Leroy B. Schwarz and published by North Holland. This book was released on 1981 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operations and Production Systems with Multiple Objectives written by Behnam Malakooti and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to uniquely combine the three fields of systems engineering, operations/production systems, and multiple criteria decision making/optimization Systems engineering is the art and science of designing, engineering, and building complex systems—combining art, science, management, and engineering disciplines. Operations and Production Systems with Multiple Objectives covers all classical topics of operations and production systems as well as new topics not seen in any similiar textbooks before: small-scale design of cellular systems, large-scale design of complex systems, clustering, productivity and efficiency measurements, and energy systems. Filled with completely new perspectives, paradigms, and robust methods of solving classic and modern problems, the book includes numerous examples and sample spreadsheets for solving each problem, a solutions manual, and a book companion site complete with worked examples and supplemental articles. Operations and Production Systems with Multiple Objectives will teach readers: How operations and production systems are designed and planned How operations and production systems are engineered and optimized How to formulate and solve manufacturing systems problems How to model and solve interdisciplinary and systems engineering problems How to solve decision problems with multiple and conflicting objectives This book is ideal for senior undergraduate, MS, and PhD graduate students in all fields of engineering, business, and management as well as practitioners and researchers in systems engineering, operations, production, and manufacturing.

Download or read book Factory Physics written by Wallace J. Hopp and published by Waveland Press. This book was released on 2011-08-31 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our economy and future way of life depend on how well American manufacturing managers adapt to the dynamic, globally competitive landscape and evolve their firms to keep pace. A major challenge is how to structure the firms environment so that it attains the speed and low cost of high-volume flow lines while retaining the flexibility and customization potential of a low-volume job shop. The books three parts are organized according to three categories of skills required by managers and engineers: basics, intuition, and synthesis. Part I reviews traditional operations management techniques and identifies the necessary components of the science of manufacturing. Part II presents the core concepts of the book, beginning with the structure of the science of manufacturing and a discussion of the systems approach to problem solving. Other topics include behavioral tendencies of manufacturing plants, push and pull production systems, the human element in operations management, and the relationship between quality and operations. Chapter conclusions include main points and observations framed as manufacturing laws. In Part III, the lessons of Part I and the laws of Part II are applied to address specific manufacturing management issues in detail. The authors compare and contrast common problems, including shop floor control, long-range aggregate planning, workforce planning and capacity management. A main focus in Part III is to help readers visualize how general concepts in Part II can be applied to specific problems. Written for both engineering and management students, the authors demonstrate the effectiveness of a rule-based and data driven approach to operations planning and control. They advance an organized framework from which to evaluate management practices and develop useful intuition about manufacturing systems.

Download or read book Quantitative Models for Supply Chain Management written by Sridhar Tayur and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative models and computer-based tools are essential for making decisions in today's business environment. These tools are of particular importance in the rapidly growing area of supply chain management. This volume is a unified effort to provide a systematic summary of the large variety of new issues being considered, the new set of models being developed, the new techniques for analysis, and the computational methods that have become available recently. The volume's objective is to provide a self-contained, sophisticated research summary - a snapshot at this point of time - in the area of Quantitative Models for Supply Chain Management. While there are some multi-disciplinary aspects of supply chain management not covered here, the Editors and their contributors have captured many important developments in this rapidly expanding field. The 26 chapters can be divided into six categories. Basic Concepts and Technical Material (Chapters 1-6). The chapters in this category focus on introducing basic concepts, providing mathematical background and validating algorithmic tools to solve operational problems in supply chains. Supply Contracts (Chapters 7-10). In this category, the primary focus is on design and evaluation of supply contracts between independent agents in the supply chain. Value of Information (Chapters 11-13). The chapters in this category explicitly model the effect of information on decision-making and on supply chain performance. Managing Product Variety (Chapters 16-19). The chapters in this category analyze the effects of product variety and the different strategies to manage it. International Operations (Chapters 20-22). The three chapters in this category provide an overview of research in the emerging area of International Operations. Conceptual Issues and New Challenges (Chapters 23-27). These chapters outline a variety of frameworks that can be explored and used in future research efforts. This volume can serve as a graduate text, as a reference for researchers and as a guide for further development of this field.

Download or read book Modern Production Concepts written by Günter Fandel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern production concepts can be considered as an essential field of economics nowadays. They help to give valuable insights and thus provide important competitive advantages. There is a broad variety of new approaches to Production Planning and Control (PPC), Just-in-Time (JIT), Flexible Manufacturing Systems (FMS), Flexible Automation (FA), Automated Guided Vehicle Systems (AGVS), Total Quality Control (TQC), and Computer Integrated Manufacturing (CIM), all of which are indispensable cornerstones in this context. This book presents in a condensed and easy-to-comprehend form the different contributions of a group of internationally recommended scientists. The varied approaches to modern production concepts are not only based on theoretical foundations but also go one step further in that they present the implementation of these concepts and methods in detail. This close link with practical aspects will help to illuminate the theoretical material for researchers and students in universities. The book will be of major importance for practitioners involved in solving everyday industrial problems. The interdisciplinary nature of these contributions will help to create a new and valuable perspective on the field of production concepts.

Download or read book Naval Research Logistics Quarterly written by and published by . This book was released on 1984 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.

Download or read book Decision Sciences written by Raghu Nandan Sengupta and published by CRC Press. This book was released on 2016-11-30 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an endeavour to cover many current, relevant, and essential topics related to decision sciences in a scientific manner. Using this handbook, graduate students, researchers, as well as practitioners from engineering, statistics, sociology, economics, etc. will find a new and refreshing paradigm shift as to how these topics can be put to use beneficially. Starting from the basics to advanced concepts, authors hope to make the readers well aware of the different theoretical and practical ideas, which are the focus of study in decision sciences nowadays. It includes an excellent bibliography/reference/journal list, information about a variety of datasets, illustrated pseudo-codes, and discussion of future trends in research. Covering topics ranging from optimization, networks and games, multi-objective optimization, inventory theory, statistical methods, artificial neural networks, times series analysis, simulation modeling, decision support system, data envelopment analysis, queueing theory, etc., this reference book is an attempt to make this area more meaningful for varied readers. Noteworthy features of this handbook are in-depth coverage of different topics, solved practical examples, unique datasets for a variety of examples in the areas of decision sciences, in-depth analysis of problems through colored charts, 3D diagrams, and discussions about software.

Download or read book Capacity Allocation Mechanisms and Coordination in Supply Chain Under Demand Competition written by Jianbin Li and published by Springer Nature. This book was released on 2022-10-31 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at providing cases with inspiring findings for global researchers in capacity allocation and reservation. Capacity allocation mechanisms are introduced in the book, as well as the measures to build models and the ways to achieve supply chain coordination. In addition, it illustrates the capacity reservation contract and quantity flexible contract with comparisons and some numerical studies. The book is divided into 7 chapters. Chapter 1 introduces the background and the latest development of the research. Chapter 2 introduces how to manage downstream competition through capacity allocation in symmetric market, including proportional mechanism and lexicographic mechanism. Demand competition is introduced in Chapter 3 as well as the uniform allocation mechanism and the comparisons among three different mechanisms. In Chapter 4, we give information about demand competition with fixed factor allocation, and the comparison with other allocations. Chapter 5 provides the optimal strategies under fixed allocation with multiple retailers and the impacts of fixed proportions. Chapter 6 illustrates how to achieve supply chain coordination through capacity reservation contract and its comparison with the quantity flexibility contract, and in Chapter 7 we describe outsourcing decisions and order policies in different systems with some numerical studies. We sincerely hope that this book can provide some useful suggestions and inspirations for scholars around the world who have the same interests in this field.

Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G Kempf and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps. Included in Volume 1 are papers on the Historical Foundations of Manufacturing Planning and Control; Advanced Planning and Scheduling Systems; Sustainable Product Development and Manufacturing; Uncertainty and Production Planning; Demand Forecasting; Production Capacity; Data in Production and Supply Chain Planning; Financial Uncertainty in SC Models; Field Based Research in Production Control; Collaborative SCM; Sequencing and Coordination in Outsourcing and Subcontracting Operations; Inventory Management; Pricing, Variety and Inventory Decisions for Substitutable Items; Perishable and Aging Inventories; Optimization Models of Production Planning Problems; Aggregate Modeling of Manufacturing Systems; Robust Stability Analysis of Decentralized Supply Chains; Simulation in Production Planning; and Simulation-Optimization in Support of Tactical and Strategic Enterprise Decisions. Included in Volume 2 are papers on Workload and Lead-Time Considerations under Uncertainty; Production Planning and Scheduling; Production Planning Effects on Dynamic Behavior of A Simple Supply Chain; Supply and Demand in Assemble-to-Order Supply Chains; Quantitative Risk Assessment in Supply Chains; A Practical Multi-Echelon Inventory Model with Semiconductor Application; Supplier Managed Inventory for Custom Items with Long Lead Times; Decentralized Supply Chain Formation; A Cooperative Game Approach to Procurement Network Formation; Flexible SC Contracts with Options; Build-to-Order Meets Global Sourcing for the Auto Industry; Practical Modeling in Automotive Production; Discrete Event Simulation Models; Diagnosing and Tuning a Statistical Forecasting System; Enterprise-Wide SC Planning in Semiconductor and Package Operations; Production Planning in Plastics; SC Execution Using Predictive Control; Production Scheduling in The Pharmaceutical Industry; Computerized Scheduling for Continuous Casting in Steelmaking; and Multi-Model Production Planning and Scheduling in an Industrial Environment.

Download or read book Optimal Inventory Modeling of Systems written by Craig C. Sherbrooke and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on inventory theory use the item approach to determine stock levels, ignoring the impact of unit cost, echelon location, and hardware indenture. Optimal Inventory Modeling of Systems is the first book to take the system approach to inventory modeling. The result has been dramatic reductions in the resources to operate many systems - fleets of aircraft, ships, telecommunications networks, electric utilities, and the space station. Although only four chapters and appendices are totally new in this edition, extensive revisions have been made in all chapters, adding numerous worked-out examples. Many new applications have been added including commercial airlines, experience gained during Desert Storm, and adoption of the Windows interface as a standard for personal computer models.

Download or read book Intelligent Computational Optimization in Engineering written by Mario Köppen and published by Springer. This book was released on 2011-07-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: We often come across computational optimization virtually in all branches of engineering and industry. Many engineering problems involve heuristic search and optimization, and, once discretized, may become combinatorial in nature, which gives rise to certain difficulties in terms of solution procedure. Some of these problems have enormous search spaces, are NP-hard and hence require heuristic solution techniques. Another difficulty is the lack of ability of classical solution techniques to determine appropriate optima of non-convex problems. Under these conditions, recent advances in computational optimization techniques have been shown to be advantageous and successful compared to classical approaches. This Volume presents some of the latest developments with a focus on the design of algorithms for computational optimization and their applications in practice. Through the chapters of this book, researchers and practitioners share their experience and newest methodologies with regard to intelligent optimization and provide various case studies of the application of intelligent optimization techniques in real-world applications.This book can serve as an excellent reference for researchers and graduate students in computer science, various engineering disciplines and the industry.

Download or read book Analysis and Algorithms for Service Parts Supply Chains written by John A. Muckstadt and published by Springer Science & Business Media. This book was released on 2006-12-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Provides a broad overview of modeling approaches and solution methodologies for addressing inventory problems, particularly the management of high cost, low demand rate service parts found in multi-echelon settings * The text may be used in a variety of courses for first-year graduate students or senior undergraduates, or as a reference for researchers and practitioners * A background in stochastic processes and optimization is assumed

Download or read book Inventory and Production Management in Supply Chains written by Edward A. Silver and published by CRC Press. This book was released on 2016-12-19 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a team of experts, the new edition of this bestseller presents practical techniques for managing inventory and production throughout supply chains. It covers the current context of inventory and production management, replenishment systems for managing individual inventories within a firm, managing inventory in multiple locations and firms, and production management. The book presents sophisticated concepts and solutions with an eye towards today’s economy of global demand, cost-saving, and rapid cycles. It explains how to decrease working capital and how to deal with coordinating chains across boundaries.

Download or read book Design Models for Hierarchical Organizations written by Richard M. Burton and published by Springer Science & Business Media. This book was released on 1995-09-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Models for Hierarchical Organizations: Computation, Information, and Decentralization provides state-of-the-art research on organizational design models, and in particular on mathematical models. Each chapter views the organization as an information processing entity. Thus, mathematical models are used to examine information flow and decision procedures, which in turn, form the basis for evaluating organization designs. Each chapters stands alone as a contribution to organization design and the modeling approach to design. Moreover, the chapters fit together and that totality gives us a good understanding of where we are with this approach to organizational design issues and where we should focus our research efforts in the future.

Download or read book Supply Chain Structures written by Jing-Sheng Song and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the foreword to Supply Chain Structures, Professor Paul Zipkin notes three global changes that have enabled the recent vast developments in the field of supply chains. Moreover, these changes may be only the beginning and more change is likely in the fast-moving field of supply chain management. These global changes are: the explosive growth of the Internet; the growth in free-market economies with the corresponding political interest in global economic stability; and the emergence of a global managerial culture focused on performance, quality, and service. Professor Zipkin goes on to say "In Supply Chain Structures, the editors Jeannette Song and David Yao have collected a spectrum of approaches to these challenges from some of the leading scholars of supply chains, from both the academic and commercial worlds. Each of the articles offers an interesting and illuminating way to think about the key issues in supply chain management. Some also offer practical techniques to solve important problems. Together they provide an excellent survey of the current state of the art in research and practice."