Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.
Download or read book Lotsizing and Scheduling for Production Planning written by Knut Haase and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Billions of dollars are tied up in the inventories of manufacturing companies which cause large (interest) costs. A small decrease of the inventory and/or production costs without reduction of the service level can increase the profit substantially. Especially in the case of scarce capacity, efficient production schedules are fundamental for short delivery time and on-time delivery which are important competitive priorities. To support decision makers by improving their manufacturing resource planning system with appropriate methods is one of the most of production planning. interesting challenges The following chapters contain new models and new solution strategies which may be helpful for decision makers and for further research in the areas of production planning and operations research. The main subject is on lotsizing and scheduling. The objectives and further characteristics of such problems can be inferred from practical need. Thus, before an outline is given, we consider the general objectives of lotsizing and scheduling and classify the most important characteristics of such problems in the following sections.
Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by . This book was released on 1996-11-18 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Planning by Mixed Integer Programming written by Yves Pochet and published by Springer Science & Business Media. This book was released on 2006-04-19 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive modeling, reformulation and optimization approach for solving production planning and supply chain planning problems, covering topics from a basic introduction to planning systems, mixed integer programming (MIP) models and algorithms through the advanced description of mathematical results in polyhedral combinatorics required to solve these problems. Based on twenty years worth of research in which the authors have played a significant role, the book addresses real life industrial production planning problems (involving complex production structures with multiple production stages) using MIP modeling and reformulation approach. The book provides an introduction to MIP modeling and to planning systems, a unique collection of reformulation results, and an easy to use problem-solving library. This approach is demonstrated through a series of real life case studies, exercises and detailed illustrations. Review by Jakub Marecek (Computer Journal) The emphasis put on mixed integer rounding and mixing sets, heuristics in-built in general purpose integer programming solvers, as well as on decompositions and heuristics using integer programming should be praised... There is no doubt that this volume offers the present best introduction to integer programming formulations of lotsizing problems, encountered in production planning. (2007)
Download or read book Multi Stage Simultaneous Lot Sizing and Scheduling written by Florian Seeanner and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to a varying product demand (changing product mix) and different production speeds, bottlenecks may shift between the stages. In that case, a simultaneous lot-sizing and scheduling of these stages is recommendable. Hence, an improved version of the General Lot-Sizing and Scheduling Problem for Multiple production Stages (GLSPMS) was developed. Moreover, several reformulation techniques were applied to this model to solve it exactly. Besides, a new meta-heuristic which combines the principles of Variable Neighborhood Decomposition Search (VNDS) and Exchange was implemented to find good solutions, even for a real-world problem case. Finally, further model extensions, e.g., for scarce setup resources, were proposed.
Download or read book Multi level Single machine Lot Sizing and Scheduling written by Alf Kimms and published by . This book was released on 1993 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deterministic Lotsizing Models for Production Planning written by Marc Salomon and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with timing and sizing decisions for production lots, and more precisely, with mathematical models to support optimal tim ing and sizing decisions. These models are called lotsizing models. They are characterized by the fact that production lots are determined based on a trade-offbetween production costs and customer service. Production costs can be categorized as basic production costs, which consist of material costs, labour costs, machine startup costs and over head costs, and inventory related costs, which include costs of capital tied up in inventory, insurances and taxes. Customer service is the capability of the firm to deliver to their clients the products in the quantity they ordered at the agreed upon time and place. The costs of realizing a certain service level are usuaIly very dif ficult to convert into money. They include costs of expediting, loss of customer goodwill, and loss of sales revenues resulting from the short age situation.
Download or read book Optimal Multi level Lot Sizing and Scheduling with Dedicated Machines written by Alf Kimms and published by . This book was released on 1994 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Applied Mechanical Engineering written by Hari Kumar Voruganti and published by Springer Nature. This book was released on 2020-02-01 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.
Download or read book Multi Stage Production Planning and Inventory Control written by Sven Axsäter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper treats a two-echelon inventory system. The higher echelon is a single location reffered to as the depot, which places orders for supply of a single com modity. The lower echelon consists of several points, called the retailers, which are supplied by shipments from the depot, and at which random demands for the item occur. Stocks are reviewed and decisions are made periodically. Orders and/or shipments may each require a fixed lead time before reaching their respective desti nations. Section II gives a short literature review of distribution research. Section III introduces the multi-echelon distribution system together with the underlying as sumptions and gives a description of how this problem can be viewed as a Markovian Decision Process. Section IV discusses the concept of cost modifications in a distribution context. Section V presents the test-examples together with their optimal solutions and also gives the characteristic properties of these optimal solutions. These properties then will be used in section VI to give adapted ver sions of various heuristics which were used in assembly experiments previously and which will be tested against the test-examples.
Download or read book Scheduling in Industry 4 0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.
Download or read book Reverse Logistics written by Rommert Dekker and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.
Download or read book Complementary Competitive Methods for Multi level Lot Sizing and Scheduling written by Alf Kimms and published by . This book was released on 1994 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production and Inventory Management with Substitutions written by J. Christian Lang and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitativeapproachesforsolvingproductionplanningandinventorymanagement problems in industry have gained growing importance in the past years. Due to the increasinguse of AdvancedPlanningSystems, a widespreadpracticalapplicationof the sophisticated optimization models and algorithms developed by the Production Management and Operations Research community now seem within reach. The possibility that productscan be replaced by certain substitute productsexists in various application areas of production planning and inventory management. Substitutions can be useful for a number of reasons, among others to circ- vent production and supply bottlenecks and disruptions, increase the service level, reduce setup costs and times, and lower inventories and thereby decrease ca- tal lockup. Considering the current trend in industry towards shorter product life cycles and greater product variety, the importance of substitutions appears likely to grow. Closely related to substitutions are ?exible bills-of-materials and recipes in multi-level production systems. However, so far, the aspect of substitutions has not attracted much attention in academic literature. Existing lot-sizing models matching complex requirements of industrial optimization problems (e.g., constrained capacities, sequence-dependent setups, multiple resources) such as the Capacitated Lot-Sizing Problem with Sequence-Dependent Setups (CLSD) and the General Lot-Sizing and Scheduling Problem for Multiple Production Stages (GLSPMS) do not feature in substitution options.
Download or read book Variable Neighborhood Search written by Angelo Sifaleras and published by Springer. This book was released on 2019-03-13 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 6th International Conference on Variable Neighborhood Search, ICVNS 2018, held in Sithonia, Greece, in October 2018. ICVNS 2018 received 49 submissions of which 23 full papers were carefully reviewed and selected. VNS is a metaheuristic based on systematic changes in the neighborhood structure within a search for solving optimization problems and related tasks. The main goal of ICVNS 2018 was to provide a stimulating environment in which researchers coming from various scientific fields could share and discuss their knowledge, expertise, and ideas related to the VNS metaheuristic and its applications.
Download or read book Data and Decision Sciences in Action 2 written by Andreas T. Ernst and published by Springer Nature. This book was released on 2021-02-26 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Joint 2018 National Conferences of the Australian Society for Operations Research (ASOR) and the Defence Operations Research Symposium (DORS). Offering a fascinating insight into the state of the art in Australian operations research, this book is of great interest to academics and other professional researchers working in operations research and analytics, as well as practitioners addressing strategic planning, operations management, and other data-driven decision-making challenges in the domains of commerce, industry, defence, the environment, humanitarianism, and agriculture. The book comprises 21 papers on topics ranging from methodological advances to case studies, and addresses application domains including supply chains, government services, defence, cybersecurity, healthcare, mining and material processing, agriculture, natural hazards, telecommunications and transportation. ASOR is the premier professional organization for Australian academics and practitioners working in optimization and other disciplines related to operations research. The conference was held in Melbourne, Australia, in December 2018.
Download or read book Intelligent and Fuzzy Techniques in Big Data Analytics and Decision Making written by Cengiz Kahraman and published by Springer. This book was released on 2019-07-05 with total page 1392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the proceedings of the Intelligent and Fuzzy Techniques INFUS 2019 Conference, held in Istanbul, Turkey, on July 23–25, 2019. Big data analytics refers to the strategy of analyzing large volumes of data, or big data, gathered from a wide variety of sources, including social networks, videos, digital images, sensors, and sales transaction records. Big data analytics allows data scientists and various other users to evaluate large volumes of transaction data and other data sources that traditional business systems would be unable to tackle. Data-driven and knowledge-driven approaches and techniques have been widely used in intelligent decision-making, and they are increasingly attracting attention due to their importance and effectiveness in addressing uncertainty and incompleteness. INFUS 2019 focused on intelligent and fuzzy systems with applications in big data analytics and decision-making, providing an international forum that brought together those actively involved in areas of interest to data science and knowledge engineering. These proceeding feature about 150 peer-reviewed papers from countries such as China, Iran, Turkey, Malaysia, India, USA, Spain, France, Poland, Mexico, Bulgaria, Algeria, Pakistan, Australia, Lebanon, and Czech Republic.
