Download or read book Multi length Scale Analysis of Chemical Vapor Deposition CVD of Diamond and Titanium Nitride Films written by Shugang Lai and published by . This book was released on 2000 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi scale Modeling of Chemical Vapor Deposition written by Jonathan Jilesen and published by . This book was released on 2009 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale modeling of chemical vapor deposition (CVD) is a very broad topic because a large number of physical processes affect the quality and speed of film deposition. These processes have different length scales associated with them creating the need for a multi-scale model. The three main scales of importance to the modeling of CVD are the reactor scale, the feature scale, and the atomic scale. The reactor scale ranges from meters to millimeters and is called the reactor scale because it corresponds with the scale of the reactor geometry. The micrometer scale is labeled as the feature scale in this study because this is the scale related to the feature geometries. However, this is also the scale at which grain boundaries and surface quality can be discussed. The final scale of importance to the CVD process is the atomic scale. The focus of this study is on the reactor and feature scales with special focus on the coupling between these two scales. Currently there are two main methods of coupling between the reactor and feature scales. The first method is mainly applied when a modified line of sight feature scale model is used, with coupling occurring through a mass balance performed at the wafer surface. The second method is only applicable to Monte Carlo based feature scale models. Coupling in this second method is accomplished through a mass balance performed at a plane offset from the surface.
Download or read book Principles of Chemical Vapor Deposition written by Daniel Dobkin and published by Springer Science & Business Media. This book was released on 2003-04-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Vapor Deposition written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1997 with total page 1686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrahigh Vacuum Metalorganic Chemical Vapor Deposition and in Situ Characterization of Nanoscale Titanium Dioxide Films written by Polly Wanda Chu and published by . This book was released on 1994 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin titanium dioxide films were produced by metalorganic chemical vapor deposition on sapphire(0001) in an ultrahigh vacuum (UHV) chamber. A method was developed for producing controlled submonolayer depositions from titanium isopropoxide precursor. Film thickness ranged from 0.1 to 2.7 nm. In situ X-ray photoelectron spectroscopy (XPS) was used to determine film stoichiometry with increasing thickness. The effect of isothermal annealing on desorption was evaluated. Photoelectron peak shapes and positions from the initial monolayers were analyzed for evidence of interface reaction. Deposition from titanium isopropoxide is divided into two regimes: depositions below and above the pyrolysis temperature. This temperature was determined to be 300 deg C. Controlled submonolayers of titanium oxide were produced by cycles of dosing with titanium isopropoxide vapor below and annealing above 300 deg C. Precursor adsorption below the pyrolysis temperature was observed to saturate after 15 minutes of dosing. The quantity absorbed was shown to have an upper limit of one monolayer. The stoichiometry of thin films grown by the cycling method were determined to be TiO2. Titanium dioxide film stoichiometry was unaffected by isothermal annealing at 700 deg C. Annealing produced a decrease in film thickness. This was explained as due to desorption. Desorption ceased at approximately 2.5 to 3 monolayers, suggesting bonding of the initial monolayers of film to sapphire is stronger than to itself. Evidence of sapphire reduction at the interface by the depositions was not observed. The XPS O is peak shifted with increased film thickness. The shifts were consistent with oxygen in sapphire and titanium dioxide having different O is photoelectron peak positions. Simulations showed the total shifts for thin films ranging in thickness of 0.1 to 2.7 nm to be -0.99 to -1.23 eV. Thick films were produced for comparison.
Download or read book Diamond Films written by Koji Kobashi and published by Elsevier. This book was released on 2010-07-07 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the most advanced techniques for diamond growth Assists diamond researchers in deciding on the most suitable process conditions Inspires readers to devise new CVD (chemical vapor deposition Ever since the early 1980s, and the discovery of the vapour growth methods of diamond film, heteroexpitaxial growth has become one of the most important and heavily discussed topics amongst the diamond research community. Kobashi has documented such discussions with a strong focus on how diamond films can be best utilised as an industrial material, working from the premise that crystal diamond films can be made by chemical vapour disposition. Kobashi provides information on the process and characterization technologies of oriented and heteroepitaxial growth of diamond films.
Download or read book An Investigation of the Temperature Distribution Induced During Laser Chemical Vapor Deposition LCVD of Titanium Nitride on Titanium aluminum vanadium written by Magdi Naim Azer and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: To understand how the substrate temperature influences the deposition rate and spatial profile of deposits formed using laser chemical vapor deposition (LCVD), spatially resolved multi-wavelength pyrometry measurements of the substrate temperature have been made during LCVD of titanium nitride (TiN) on Ti-6Al-4V substrates. The precursors that have been used are TiCl$sb4,$ N$sb2,$ and H$sb2.$ Also, deposition has been studied as a function of the N$sb2$:H$sb2$ gas ratio, the TiCl$sb4$ partial pressure, the total chamber pressure, and the laser power. Also, film thickness has been measured by stylus profilometry, and film composition and microstructure have been determined by Scanning Electron Microscopy (SEM), Auger Electron Spectroscopy (AES), and X-ray Photoelectron Spectroscopy (XPS). While the substrate temperature and the gas composition have the greatest influence on TiN film growth, H$sb2$ exerts the greatest influence on TiN film growth. Also, enhanced mass transport associated with localized laser beam heating has led to film growth rates on the order of 1 $mu$m/sec; however, there is still evidence of reactant depletion at the center of the laser heated spot. In addition to calculating film growth rates based on film height, two new methods of characterizing the film growth rate have been developed. Using these growth rates, three insights have been obtained. First, the film growth rates are 1-1/2 orders of magnitude greater than typical CVD deposition rates. Second, radial growth of the films continues after reactant depletion occurs at the center of the deposit. Third, comparison of the growth rates with LIF measurements supports the concept of a temperature-dependent sticking coefficient. Based on the experiments, reaction rate equations have been postulated as a function of N$sb2$/H$sb2$ gas ratio and TiCl$sb4$ partial pressure. Also, the apparent activation energy for deposition is 108.9 kJ/mol when one calculates the deposition rate based on film height. Using alternate definitions of film growth rates, the apparent activation energies are 65.2 and 81.4 kl/mol. The discrepancy in these activation energies has occurred because part of the measured film volume is actually TiCl$sb4$ rather than TiN.
Download or read book Chemical Vapor Deposition for Nanotechnology written by Pietro Mandracci and published by BoD – Books on Demand. This book was released on 2019-01-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical vapor deposition (CVD) techniques have played a major role in the development of modern technology, and the rise of nanotechnology has further increased their importance, thanks to techniques such as atomic layer deposition (ALD) and vapor liquid solid growth, which are able to control the growth process at the nanoscale. This book aims to contribute to the knowledge of recent developments in CVD technology and its applications. To this aim, important process innovations, such as spatial ALD, direct liquid injection CVD, and electron cyclotron resonance CVD, are presented. Moreover, some of the most recent applications of CVD techniques for the growth of nanomaterials, including graphene, nanofibers, and diamond-like carbon, are described in the book.
Download or read book Chemical Vapor Deposition written by Jong-Hee Park and published by ASM International. This book was released on 2001 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Assisted Synthesis and Physical Chemical Characterization of Titanium Nitride Films written by Michael Robert Hilton and published by . This book was released on 1987 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1999-04 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Vapour Deposition CVD written by Kwang-Leong Choy and published by CRC Press. This book was released on 2019-06-07 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely and complete overview on chemical vapour deposition (CVD) and its variants for the processing of nanoparticles, nanowires, nanotubes, nanocomposite coatings, thin and thick films, and composites. Chapters discuss key aspects, from processing, material structure and properties to practical use, cost considerations, versatility, and sustainability. The author presents a comprehensive overview of CVD and its potential in producing high performance, cost-effective nanomaterials and thin and thick films. Features Provides an up-to-date introduction to CVD technology for the fabrication of nanomaterials, nanostructured films, and composite coatings Discusses processing, structure, functionalization, properties, and use in clean energy, engineering, and biomedical grand challenges Covers thin and thick films and composites Compares CVD with other processing techniques in terms of structure/properties, cost, versatility, and sustainability Kwang-Leong Choy is the Director of the UCL Centre for Materials Discovery and Professor of Materials Discovery in the Institute for Materials Discovery at the University College London. She earned her D.Phil. from the University of Oxford, and is the recipient of numerous honors including the Hetherington Prize, Oxford Metallurgical Society Award, and Grunfeld Medal and Prize from the Institute of Materials (UK). She is an elected fellow of the Institute of Materials, Minerals and Mining, and the Royal Society of Chemistry.
Download or read book Diamond Chemical Vapor Deposition written by Huimin Liu and published by Elsevier. This book was released on 1996-12-31 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an updated, systematic review of the latest developments in diamond CVD processes, with emphasis on the nucleation and early growth of diamond CVD. The objective is to familiarize the reader with the scientific and engineering aspects of diamond CVD, and to provide experiences researchers, scientists, and engineers in academia and industry with the latest developments in this growing field.
Download or read book Low Pressure Chemical Vapor Deposition LPCVD of Titanium Nitride written by Sameer Narsinha Dharmadhikari and published by . This book was released on 1999 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium tetrachioride and ammonia were used as precursors in a Jow pressure chemical vapor deposition process to deposit titanium nitride films on silicon wafers. The process was carried out at temperatures from 450 to 850°C and the activation energy for the reaction was determined. The order of the reaction, with respect to the partial pressures of the reactant gases, was determined by carrying out the reaction at varying partial pressures of the reactant gases. The following rate equation was established for the reaction: rate = 4.35*10-5exp( -5150/T)*(PNH3)1.37(PTicl4)-0.42 The titanium nitride thin films deposited were characterized for properties like resistivity, stress, hardness, and density. The effects of varying the process parameters (temperature, flow ratio, etc.) on these film properties were studied.
Download or read book Mechanical Properties of Chemical Vapor Deposited Diamond written by Avinash Kant and published by . This book was released on 1997 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
