Download or read book Robot Manipulators written by Agustin Jimenez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in robot manipulators. It offers a complete survey to the kinematic and dynamic modelling, simulation, computer vision, software engineering, optimization and design of control algorithms applied for robotic systems. It is devoted for a large scale of applications, such as manufacturing, manipulation, medicine and automation. Several control methods are included such as optimal, adaptive, robust, force, fuzzy and neural network control strategies. The trajectory planning is discussed in details for point-to-point and path motions control. The results in obtained in this book are expected to be of great interest for researchers, engineers, scientists and students, in engineering studies and industrial sectors related to robot modelling, design, control, and application. The book also details theoretical, mathematical and practical requirements for mathematicians and control engineers. It surveys recent techniques in modelling, computer simulation and implementation of advanced and intelligent controllers.
Download or read book Optimal Path and Trajectory Planning for Serial Robots written by Alexander Reiter and published by Springer Nature. This book was released on 2019-11-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alexander Reiter describes optimal path and trajectory planning for serial robots in general, and rigorously treats the challenging application of path tracking for kinematically redundant manipulators therein in particular. This is facilitated by resolving both the path tracking task and the optimal inverse kinematics problem simultaneously. Furthermore, the author presents methods for fast computation of approximate optimal solutions to planning problems with changing parameters. With an optimal solution to a nominal problem, an iterative process based on parametric sensitivities is applied to rapidly obtain an approximate solution. About the Author: Dr. Alexander Reiter is a senior scientist at the Institute of Robotics of the Johannes Kepler University (JKU) Linz, Austria. His major fields of research are kinematics, dynamics, and trajectory planning for kinematically redundant serial robots as well as real-time methods for solving parametric non-linear programming problems.
Download or read book Robotics and Manufacturing written by Mohammad Jamshidi and published by American Society of Mechanical Engineers. This book was released on 1996 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the May 1996 symposium. Topics include experimental results of operational space control on a dual-arm robot system, design and control of an anthropomorphic servopneumatic finger joint, robot control strategy for camera guidance in laparoscopic surgery, dense reconstruction using fix
Download or read book Mechanical Design of an Autonomous Redundant Mobile Manipulator written by David Timothy Eveland and published by . This book was released on 1999 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Journal of Applied Mathematics and Computer Science written by and published by . This book was released on 2006 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Science Technology Index written by and published by . This book was released on 1997 with total page 2948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2021 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2021 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). The Editors Prof. Dr.-Ing. Thorsten Schüppstuhl is head of the Institute of Aircraft Production Technology (IFPT) at the Hamburg University of Technology. Prof. Dr.-Ing. Kirsten Tracht is head of the Bremen Institute for Mechanical Engineering (bime) at the University of Bremen. Prof. Dr.-Ing. Annika Raatz is head of the Institute of Assembly Technology (match) at the Leibniz University Hannover.
Download or read book Applications of Robotics in Industry Using Advanced Mechanisms written by Janmenjoy Nayak and published by Springer Nature. This book was released on 2019-09-03 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares important findings on the application of robotics in industry using advanced mechanisms, including software and hardware. It presents a collection of recent trends and research on various advanced computing paradigms such as soft computing, robotics, smart automation, power control, and uncertainty analysis. The book constitutes the proceedings of the 1st International Conference on Application of Robotics in Industry using Advanced Mechanisms (ARIAM2019), which offered a platform for sharing original research findings, presenting innovative ideas and applications, and comparing notes on various aspects of robotics. The contributions highlight the latest research and industrial applications of robotics, and discuss approaches to improving the smooth functioning of industries. Moreover, they focus on designing solutions for complex engineering problems and designing system components or processes to meet specific needs, with due considerations for public health and safety, including cultural, societal, and environmental considerations. Taken together, they offer a valuable resource for researchers, scientists, engineers, professionals and students alike.
Download or read book Geometric Control Theory written by Velimir Jurdjevic and published by Cambridge University Press. This book was released on 1997 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric control theory is concerned with the evolution of systems subject to physical laws but having some degree of freedom through which motion is to be controlled. This book describes the mathematical theory inspired by the irreversible nature of time evolving events. The first part of the book deals with the issue of being able to steer the system from any point of departure to any desired destination. The second part deals with optimal control, the question of finding the best possible course. An overlap with mathematical physics is demonstrated by the Maximum principle, a fundamental principle of optimality arising from geometric control, which is applied to time-evolving systems governed by physics as well as to man-made systems governed by controls. Applications are drawn from geometry, mechanics, and control of dynamical systems. The geometric language in which the results are expressed allows clear visual interpretations and makes the book accessible to physicists and engineers as well as to mathematicians.
Download or read book Columbia Crew Survival Investigation Report written by Nasa and published by PDQ Press. This book was released on 2009 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA commissioned the Columbia Accident Investigation Board (CAIB) to conduct a thorough review of both the technical and the organizational causes of the loss of the Space Shuttle Columbia and her crew on February 1, 2003. The accident investigation that followed determined that a large piece of insulating foam from Columbia's external tank (ET) had come off during ascent and struck the leading edge of the left wing, causing critical damage. The damage was undetected during the mission. The Columbia accident was not survivable. After the Columbia Accident Investigation Board (CAIB) investigation regarding the cause of the accident was completed, further consideration produced the question of whether there were lessons to be learned about how to improve crew survival in the future. This investigation was performed with the belief that a comprehensive, respectful investigation could provide knowledge that can protect future crews in the worldwide community of human space flight. Additionally, in the course of the investigation, several areas of research were identified that could improve our understanding of both nominal space flight and future spacecraft accidents. This report is the first comprehensive, publicly available accident investigation report addressing crew survival for a human spacecraft mishap, and it provides key information for future crew survival investigations. The results of this investigation are intended to add meaning to the sacrifice of the crew's lives by making space flight safer for all future generations.
Download or read book Department of Defense Dictionary of Military and Associated Terms written by United States. Joint Chiefs of Staff and published by . This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Managing Space Radiation Risk in the New Era of Space Exploration written by National Research Council and published by National Academies Press. This book was released on 2008-06-29 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Vision for Space Exploration (VSE), NASA is planning for humans to revisit the Moon and someday go to Mars. An important consideration in this effort is protection against the exposure to space radiation. That radiation might result in severe long-term health consequences for astronauts on such missions if they are not adequately shielded. To help with these concerns, NASA asked the NRC to further the understanding of the risks of space radiation, to evaluate radiation shielding requirements, and recommend a strategic plan for developing appropriate mitigation capabilities. This book presents an assessment of current knowledge of the radiation environment; an examination of the effects of radiation on biological systems and mission equipment; an analysis of current plans for radiation protection; and a strategy for mitigating the risks to VSE astronauts.
Download or read book IAMSAR Manual written by International Maritime Organization and published by . This book was released on 2002 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Genetic Algorithms and Robotics written by Yuval Davidor and published by World Scientific. This book was released on 1991 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical optimization methodologies fall short in very large and complex domains. In this book is suggested a different approach to optimization, an approach which is based on the 'blind' and heuristic mechanisms of evolution and population genetics. The genetic approach to optimization introduces a new philosophy to optimization in general, but particularly to engineering. By introducing the ?genetic? approach to robot trajectory generation, much can be learned about the adaptive mechanisms of evolution and how these mechanisms can solve real world problems. It is suggested further that optimization at large may benefit greatly from the adaptive optimization exhibited by natural systems when attempting to solve complex optimization problems, and that the determinism of classical optimization models may sometimes be an obstacle in nonlinear systems.This book is unique in that it reports in detail on an application of genetic algorithms to a real world problem, and explains the considerations taken during the development work. Futhermore, it addresses robotics in two new aspects: the optimization of the trajectory specification which has so far been done by human operators and has not received much attention for both automation and optimization, and the introduction of a heuristic strategy to a field predominated by deterministic strategies.
Download or read book Advances in Control written by Paul M. Frank and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Control contains keynote contributions and tutorial material from the fifth European Control Conference, held in Germany in September 1999. The topics covered are of particular relevance to all academics and practitioners in the field of modern control engineering. These include: - Modern Control Theory - Fault Tolerant Control Systems - Linear Descriptor Systems - Generic Robust Control Design - Verification of Hybrid Systems - New Industrial Perspectives - Nonlinear System Identification - Multi-Modal Telepresence Systems - Advanced Strategies for Process Control - Nonlinear Predictive Control - Logic Controllers of Continuous Plants - Two-dimensional Linear Systems. This important collection of work is introduced by Professor P.M. Frank who has almost forty years of experience in the field of automatic control. State-of-the-art research, expert opinions and future developments in control theory and its industrial applications, combine to make this an essential volume for all those involved in control engineering.
Download or read book Operational Terms and Graphics written by Department Army and published by Createspace Independent Publishing Platform. This book was released on 2017-07-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.
