Download or read book Morphology of Segmented Polyurethanes as Probed by Electron Microscopy Small angle X ray Scattering and Gas Transport Measurement written by Chi Li and published by . This book was released on 1988 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Yearbook written by Richard A. Pethrick and published by CRC Press. This book was released on 1991 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains reviews on state-of-the-art Japanese research presented in the annual Spring and Autumn meetings of the Japanese Polymer Science Society. The aim of this section is to make information on the progress of Japanese Polymer Science, and on topics of current interest to polymer scientists in Japan, more easily available worldwide.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1989 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Yearbook written by and published by . This book was released on 1991 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Progress written by and published by . This book was released on 1989 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1988-04 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directory of Graduate Research written by American Chemical Society. Committee on Professional Training and published by . This book was released on 1983 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Download or read book Polyurethane Elastomers written by Cristina Prisacariu and published by Springer Science & Business Media. This book was released on 2011-07-03 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the physical / mechanical behaviour of polyurethanes (PU ́s) elastomers, films and blends of variable crystallinity. Aspects covered include the elasticity and inelasticity of amorphous to crystalline PUs, in relation to their sensitivity to chemical and physical structure. A study is made of how aspects of the constitutive responses of PUs vary with composition: the polyaddition procedure, the hard segment, soft segment and chain extender (diols and diamines) are varied systematically in a large number of systems of model and novel crosslinked andthermoplastic PUs. Results will be related to: microstructural changes, on the basis of evidence from x-ray scattering (SAXS and WAXS), and also dynamic mechanical analyses (DMA), differential scanning calorimetry (DSC) and IR dichroism. Inelastic effects will be investigated also by including quantitative correlations between the magnitude of the Mullins effect and the fractional energy dissipation by hysteresis under cyclic straining, giving common relations approached by all the materials studied. A major structural feature explored is the relationship between the nature of the hard segment (crystallising or not) and that of the soft segments. Crystallinity has been sometimes observed in the commercial PUs hard phase but this is usually limited to only a few percent for most hard segment structures when solidified from the melt. One particular diisocyanate, 4,4’-dibenzyl diisocyanate (DBDI) that, in the presence of suitable chain extenders ( diols or diamines), gives rise to significant degrees of crystallinity [i-iii] and this is included in the present work. Understanding the reaction pathways involved, in resolving the subtle morphological evolution at the nanometre level, and capturing mathematically the complex, large-deformation nonlinear viscoelastic mechanical behaviour are assumed to bring new important insights in the world basic research in polyurethanes and towards applied industrial research in this area.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Scanning Electron Microscopy written by Ludwig Reimer and published by Springer. This book was released on 2013-11-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Electron Microscopy provides a description of the physics of electron-probe formation and of electron-specimen interactions. The different imaging and analytical modes using secondary and backscattered electrons, electron-beam-induced currents, X-ray and Auger electrons, electron channelling effects, and cathodoluminescence are discussed to evaluate specific contrasts and to obtain quantitative information.
Download or read book X ray Scattering of Synthetic Polymers written by F. J. Baltá-Calleja and published by Elsevier Publishing Company. This book was released on 1989 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray scattering is one of the most powerful tools in the study of the structure of the wide class of polymeric materials in which partial crystallization occurs. The scattering at wide angles provides information on the unit cell variations, the crystallinity, the crystalline perfection and the orientation of the crystallites, whereas the scattering at small angles is specially suited to a description of the crystalline-amorphous morphology. As a result of scientific advances and industrial interest in polymers, progress in constantly being made in the application of X-ray scattering to these materials. This book describes the current state-of-the-art of the application of X-ray scattering to the study of solid polymer materials. As well as chapters on theory and instrumentation, the book covers subjects concerning the measurement of lattice constants, the crystalline perfection, the degree of crystallinity and the description of preferred orientation. In addition, special emphasis is given to the study of the crystalline morphology with the aid of small-angle X-ray scattering, giving both theoretical background and practical information.
Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.
Download or read book Polymers and Neutron Scattering written by Julia S. Higgins and published by Oxford University Press on Demand. This book was released on 1996 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of neutron scattering to polymers has been extremely successful during the last two decades. This book presents, for the first time, both the theories and experimental examples which are needed to understand how these techniques can be applied. Now available in paperback forthe first time this book is specifically written to introduce the newcomer and non-expert to the experimental techniques and the basic theory necessary to understand the results.
Download or read book Photoneutron Sources written by B. W. Sargent and published by . This book was released on 1946 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Polysiloxanes written by James E. Mark and published by . This book was released on 2015 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: A synthesis of the novel aspects of polysiloxane science and engineering.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
