Download or read book Morphological Evolution and Kinetics of Precipitation of gamma Ni3Al Precipitates at Low Volume Fractions in Dilute Ni Al Alloys written by Abhay Maheshwari and published by . This book was released on 1993 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evolution of Ni3X Precipitation Kinetics Morphology and Spatial Correlations in Binary Ni X Alloys Aged Under Externally Applied Stress written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Coarsening of Ni3Al, Ni3Ga, Ni3Ge and Ni3Si precipitates in aged binary single-crystal Ni-Al, Ni-Ga, Ni-Ge and Ni-Si alloys under applied compressive stress was measured experimentally over the temperature range 600 to 700 °C. Experiments were also performed on binary Ni-Al single crystals deformed in tension at 640°C. The orientation of the crystals was [100] in all the experiments. Compared to the kinetics of coarsening in unstressed alloys, coarsening was slightly slower in specimens aged under compression and slightly faster in specimens aged in tension. The effect of applied stress on morphology and spatial correlation was also measured and found to be small. Ni3Al precipitates of a given size generally tended to become more non-equiaxed and their interfaces more planar, with increasing compressive stress. Ni3Ge precipitates behaved differently, becoming more spherical in specimens aged under compression. The effect of applied stress on kinetics is attributed to the influence of elastic deformation on diffusion. A model was developed that predicts slightly slower diffusion under compression and slightly faster diffusion in tension. The elastic constants of single crystals of Ni-Al, Ni-Si, Ni-Ga and Ni-Ge solid solutions were measured from room temperature to about 1100 K using resonant ultrasound spectroscopy.
Download or read book Phase field Simulations of the Precipitation Kinetics and Microstructure Development in Nickel based Superalloys written by Caleb Onuh Yenusah and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continual research and development of nickel-based superalloys is driven by the global demand to improve efficiency and reduce emissions in the aerospace and power generation industries. Integrated Computational Material Engineering (ICME) is a valuable tool for reducing the cost, time, and resources necessary for the development and optimization of the mechanical properties of materials. In this work, an ICME approach for understanding the microstructure development and optimizing the mechanical properties in nickel-based superalloys is employed. Most nickel-based superalloys are precipitate strengthened by either the (gamma)' phase, (gamma)ʺ phase, or both. Therefore, understanding the precipitation kinetics and morphological evolution of these phases is critical for evaluating their hardening effects during heat treatment and degradation of the microstructure during high temperature service. To this end, a phase-field model has been developed to analyze the nucleation, growth and coarsening kinetics during isothermal and non-isothermal aging conditions. Utilizing the phase-field model, the (gamma)ʺ phase microstructure development and its coherency strengthening effect in Inconel 625 is studied. A novel multistage aging strategy to optimize the (gamma)ʺ phase strengthening effect and reduce aging times for Inconel 625 is proposed. Secondly, the coarsening kinetic and microstructure development of (gamma)' strengthening phase in nickel-based superalloys is studied, with the goal of understanding the effect of elastic inhomogeneity on the microstructure evolution at high volume fractions of the (gamma)' phase. The result shows deviation of the coarsening kinetics from the classical Lifshitz-Slyozov-Wagner (LSW) due to the effect of elastic inhomogeneity, highlighting the need for incorporating elastic energy into coarsening theories.
Download or read book Coarsening Kinetics and Morphological Evolution of Ni X solid Solution Precipitates in Ordered Ni3X Alloys X written by Yong Ma and published by . This book was released on 2005 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.
Download or read book Strengthening Methods in Crystals written by Sir Robin Nicholson and published by Halsted Press. This book was released on 1972 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.
Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Complex Inorganic Solids written by Patrice E. A. Turchi and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key aspects of this volume is to cut across the traditional taxonomy of disciplines in the study of alloys. Hence there has been a deliberate attempt to integrate the different approaches taken towards alloys as a class of materials in different fields, ranging from geology to metallurgical engineering. The emphasis of this book is to highlight commonalities between different fields with respect to how alloys are studied. The topics in this book fall into several themes, which suggest a number of different classification schemes. We have chosen a scheme that classifies the papers in the volume into the categories Microstructural Considerations, Ordering, Kinetics and Diffusion, Magnetic Considerations and Elastic Considerations. The book has juxtaposed apparently disparate approaches to similar physical processes, in the hope of revealing a more dynamic character of the processes under consideration. This monograph will invigorate new kinds of discussion and reveal challenges and new avenues to the description and prediction of properties of materials in the solid state and the conditions that produce them.
Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous edition invaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.
Download or read book Imperfections in Crystalline Solids written by Wei Cai and published by Cambridge University Press. This book was released on 2016-09-15 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides students with a complete working knowledge of the properties of imperfections in crystalline solids. Readers will learn how to apply the fundamental principles of mechanics and thermodynamics to defect properties in materials science, gaining all the knowledge and tools needed to put this into practice in their own research. Beginning with an introduction to defects and a brief review of basic elasticity theory and statistical thermodynamics, the authors go on to guide the reader in a step-by-step way through point, line, and planar defects, with an emphasis on their structural, thermodynamic, and kinetic properties. Numerous end-of-chapter exercises enable students to put their knowledge into practice, and with solutions for instructors and MATLAB® programs available online, this is an essential text for advanced undergraduate and introductory graduate courses in crystal defects, as well as being ideal for self-study.
Download or read book Current Awareness in Particle Technology written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
