Download or read book Morphological and Electrical Variance in Polysilicon Thin Film Transistors Crystallized by Flash Lamp Annealing written by Glenn Packard and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This work is a wide-reaching study of the factors that impact the in-situ crystallization of thin films of amorphous silicon into low-temperature polycrystalline silicon (LTPS) by flash lamp annealing (FLA) on glass substrates, which is used to develop thin film transistors (TFTs) with an eye towards display applications. The body of research surrounding FLA LTPS is thus advanced by identifying several challenges towards industrial integration and exploring solutions involving device configuration, novel methods of dopant introduction and activation, and novel TFT material systems. It is unlikely that FLA will ever produce LTPS superior to the laser-annealing techniques currently dominating the market, but its significant improvements in throughput and roll-to-roll compatibility make it an attractive complementary technology. In this work, existing FLA LTPS TFT research is expanded into complementary metal-oxide-semiconductor (CMOS) logic to take advantage of the n- and p- channel compatibility of LTPS over competing amorphous oxide technology. A processing alternative is developed for scaling these devices down to current dimensions of liquid crystal display (LCD) transistor backplanes and then further improved by exploring a silicon ion self-implant to preamorphize the polycrystalline lattice structure, allowing enhanced dopant activation at temperatures compatible with thermally-fragile substrates. This method is also shown to be compatible with a self-aligned device configuration for ease of processing and reduced parasitic capacitance. Additionally, a new strategy for producing bottom-gate LTPS devices (a consistent challenge for laser-annealed LTPS) is presented by incorporating a transparent conductive oxide as a gate structure. The increased thermal mass provided by the bottom gate is harnessed to improve the impact of channel crystallization at lower pulse intensity, producing devices with extremely high channel mobility at low drain voltage. Monolayer Doping (MLD) is demonstrated to be compatible with FLA LTPS, utilizing a simultaneous anneal to both crystallize amorphous silicon and activate selectively self-assembled MLD-adhered dopants. MLD phosphorus n-channel TFTs are presented with activation on par with that of ultra-shallow MLD junctions on bulk silicon. Further, Gallium MLD is demonstrated for the first time, successfully producing p-channel TFTs with FLA. The material system of FLA-crystallized silicon on chromium, already well established in the micrometer-thick film range for PV applications, is given an in-depth investigation in the nanometer thin film range for TFT applications. A unique set of crystallization patterns and texture on the nanometer scale is revealed and characterized to determine the extent, cause, and impact of chromium redistribution in this material, which is also explored as a predictable and edge-directed morphology of FLA LTPS for a wide variety of device configurations. Finally, the individual advancements in this work are explored in many combinations in a wide multi-process study to determine their efficacy as techniques for producing FLA LTPS TFTs. Using this broad information, the field of flash-lamp crystallized TFTs is advanced and several challenges are more specifically identified as a foundation for future research."--Abstract.
Download or read book Wafer Bonding written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2004-05-14 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade direct wafer bonding has developed into a mature materials integration technology. This book presents state-of-the-art reviews of the most important applications of wafer bonding written by experts from industry and academia. The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
Download or read book Photovoltaic and Photoactive Materials written by Joseph M. Marshall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Download or read book Amorphous Oxide Semiconductors written by Hideo Hosono and published by John Wiley & Sons. This book was released on 2022-05-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: AMORPHOUS OXIDE SEMICONDUCTORS A singular resource on amorphous oxide semiconductors edited by a world-recognized pioneer in the field In Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory, the Editors deliver a comprehensive account of the current status of—and latest developments in—transparent oxide semiconductor technology. With contributions from leading international researchers and exponents in the field, this edited volume covers physical fundamentals, thin-film transistor applications, processing, circuits and device simulation, display and memory applications, and new materials relevant to amorphous oxide semiconductors. The book makes extensive use of structural diagrams of materials, energy level and energy band diagrams, device structure illustrations, and graphs of device transfer characteristics, photographs and micrographs to help illustrate the concepts discussed within. It also includes: A thorough introduction to amorphous oxide semiconductors, including discussions of commercial demand, common challenges faced during their manufacture, and materials design Comprehensive explorations of the electronic structure of amorphous oxide semiconductors, structural randomness, doping limits, and defects Practical discussions of amorphous oxide semiconductor processing, including oxide materials and interfaces for application and solution-process metal oxide semiconductors for flexible electronics In-depth examinations of thin film transistors (TFTs), including the trade-off relationship between mobility and reliability in oxide TFTs Perfect for practicing scientists, engineers, and device technologists working with transparent semiconductor systems, Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory will also earn a place in the libraries of students studying oxides and other non-classical and innovative semiconductor devices. WILEY SID Series in Display Technology Series Editor: Ian Sage, Abelian Services, Malvern, UK The Society for Information Display (SID) is an international society which has the aim of encouraging the development of all aspects of the field of information display. Complementary to the aims of the society, the Wiley-SID series is intended to explain the latest developments in information display technology at a professional level. The broad scope of the series addresses all facets of information displays from technical aspects through systems and prototypes to standards and ergonomics.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book Silicon on Insulator Technology Materials to VLSI written by J.-P. Colinge and published by Springer Science & Business Media. This book was released on 2004-02-29 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-on-Insulator Technology: Materials to VLSI, Third Edition, retraces the evolution of SOI materials, devices and circuits over a period of roughly twenty years. Twenty years of progress, research and development during which SOI material fabrication techniques have been born and abandoned, devices have been invented and forgotten, but, most importantly, twenty years during which SOI Technology has little by little proven it could outperform bulk silicon in every possible way. The turn of the century turned out to be a milestone for the semiconductor industry, as high-quality SOI wafers suddenly became available in large quantities. From then on, it took only a few years to witness the use of SOI technology in a wealth of applications ranging from audio amplifiers and wristwatches to 64-bit microprocessors. This book presents a complete and state-of-the-art review of SOI materials, devices and circuits. SOI fabrication and characterization techniques, SOI CMOS processing, and the physics of the SOI MOSFET receive an in-depth analysis. Silicon-on-Insulator Technology: Materials to VLSI, Third Edition, also describes the properties of other SOI devices, such as multiple gate MOSFETs, dynamic threshold devices and power MOSFETs. The advantages and performance of SOI circuits used in both niche and mainstream applications are discussed in detail. The SOI specialist will find this book invaluable as a source of compiled references covering the different aspects of SOI technology. For the non-specialist, the book serves an excellent introduction to the topic with detailed, yet simple and clear explanations. Silicon-on-Insulator Technology: Materials to VLSI, Third Edition is recommended for use as a textbook for classes on semiconductor device processing and physics at the graduate level.
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Metal Induced Crystallization written by Zumin Wang and published by CRC Press. This book was released on 2015-01-28 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystalline semiconductors in the form of thin films are crucial materials for many modern, advanced technologies in fields such as microelectronics, optoelectronics, display technology, and photovoltaic technology. Crystalline semiconductors can be produced at surprisingly low temperatures (as low as 120C) by crystallization of amorphous semicon
Download or read book Handbook of Photovoltaic Science and Engineering written by Antonio Luque and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive, authoritative and widely cited reference on photovoltaic solar energy Fully revised and updated, the Handbook of Photovoltaic Science and Engineering, Second Edition incorporates the substantial technological advances and research developments in photovoltaics since its previous release. All topics relating to the photovoltaic (PV) industry are discussed with contributions by distinguished international experts in the field. Significant new coverage includes: three completely new chapters and six chapters with new authors device structures, processing, and manufacturing options for the three major thin film PV technologies high performance approaches for multijunction, concentrator, and space applications new types of organic polymer and dye-sensitized solar cells economic analysis of various policy options to stimulate PV growth including effect of public and private investment Detailed treatment covers: scientific basis of the photovoltaic effect and solar cell operation the production of solar silicon and of silicon-based solar cells and modules how choice of semiconductor materials and their production influence costs and performance making measurements on solar cells and modules and how to relate results under standardised test conditions to real outdoor performance photovoltaic system installation and operation of components such as inverters and batteries. architectural applications of building-integrated PV Each chapter is structured to be partially accessible to beginners while providing detailed information of the physics and technology for experts. Encompassing a review of past work and the fundamentals in solar electric science, this is a leading reference and invaluable resource for all practitioners, consultants, researchers and students in the PV industry.
Download or read book Silicon written by Paul Siffert and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: With topics ranging from epitaxy through lattice defects and doping to quantum computation, this book provides a personalized survey of the development and use of silicon, the basis for the revolutionary changes in our lives sometimes called "The Silicon Age." Beginning with the very first developments more than 50 years ago, this reports on all aspects of silicon and silicon technology up to its use in exciting new technologies, including a glance at possible future developments.
Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
Download or read book Subsecond Annealing of Advanced Materials written by Wolfgang Skorupa and published by Springer Science & Business Media. This book was released on 2013-12-16 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermal processing of materials ranges from few fem to seconds by Swift Heavy Ion Implantation to about one second using advanced Rapid Thermal Annealing. This book offers after an historical excursus selected contributions on fundamental and applied aspects of thermal processing of classical elemental semiconductors and other advanced materials including nanostructures with novel optoelectronic, magnetic, and superconducting properties. Special emphasis is given on the diffusion and segregation of impurity atoms during thermal treatment. A broad range of examples describes the solid phase and/or liquid phase processing of elemental and compound semiconductors, dielectric composites and organic materials.
Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Science & Business Media. This book was released on 2009 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bird's-eye view of the developmental trends and problems of recent photovoltaics is presented. The worldwide effort to develop high-efficiency low-cost PV modules, making use of most efficient solar cells and clever low-cost solar concentrators is described.
Download or read book Modern Aspects of Bulk Crystal and Thin Film Preparation written by Nikolai Kolesnikov and published by BoD – Books on Demand. This book was released on 2012-01-13 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern research and development, materials manufacturing crystal growth is known as a way to solve a wide range of technological tasks in the fabrication of materials with preset properties. This book allows a reader to gain insight into selected aspects of the field, including growth of bulk inorganic crystals, preparation of thin films, low-dimensional structures, crystallization of proteins, and other organic compounds.
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
