Download or read book Acoustic Emission written by Wolfgang Sachse and published by ASTM International. This book was released on 1991 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the symposium held in Charlotte, NC, March 1989, examine the phenomenon in which elastic or stress waves are emitted from a rapid, localized change of strain energy in a material. The first section focuses on AE sensors and systems. The second deals with fundamental investigation

Download or read book Acoustic Emission Testing written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2008-07-12 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission (AE) techniques have been studied in civil engineering for a long time. The techniques are recently going to be more and more applied to practical applications and to be standardized in the codes. This is because the increase of aging structures and disastrous damages due to recent earthquakes urgently demand for maintenance and retrofit of civil structures in service for example. It results in the need for the development of advanced and effective inspection techniques. Thus, AE techniques draw a great attention to diagnostic applications and in material testing. The book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes.

Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.

Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Materials Second International Conference Proceedings written by Craig A. Rogers and published by CRC Press. This book was released on 1994-01-01 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key science and technology challenges which will facilitate the transition from a "make do and mend" philosophy inevitably restricting the degree of intelligence which can be engineered and the "designer materials systems" philosophy which is the ultimate goal are considered. The longer term vision will need to accord much more closely with nature's design paradigms, with control at the molecular, nano, micro and macro level of synthesis and assembly, of active self repair materials systems in function shapes.

Download or read book Computer aided Maintenance written by Jay Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's business environment, reliability and maintenance drastically affect the three key elements of competitiveness - quality, cost, and product lead time. Well-maintained machines hold tolerances better, help reduce scrap and rework, and raise consistency and quality of the part in addition to cutting total production costs. Today, many factories are still performing maintenance on equipment in a reactive manner due to a lack of understanding about machine performance behaviour. To improve production efficiency, computer-aided maintenance and diagnostic methodology must be applied effectively in manufacturing. This book focuses on the fundamental principles of predictive maintenance and diagnostic engineering. In addition to covering the relevant theory, techniques and methodologies in maintenance engineering, the book also provides numerous case studies and examples illustrating the successful application of the principles and techniques outlined.

Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.

Download or read book Selected Papers from the 5th International Electronic Conference on Sensors and Applications written by Francisco Falcone and published by MDPI. This book was released on 2020-12-29 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue comprises selected papers from the proceedings of the 5th International Electronic Conference on Sensors and Applications, held on 15–30 November 2018, on sciforum.net, an online platform for hosting scholarly e-conferences and discussion groups. In this 5th edition of the electronic conference, contributors were invited to provide papers and presentations from the field of sensors and applications at large, resulting in a wide variety of excellent submissions and topic areas. Papers which attracted the most interest on the web or that provided a particularly innovative contribution were selected for publication in this collection. These peer-reviewed papers are published with the aim of rapid and wide dissemination of research results, developments, and applications. We hope this conference series will grow rapidly in the future and become recognized as a new way and venue by which to (electronically) present new developments related to the field of sensors and their applications.

Download or read book Multi Sensor Information Fusion written by Xue-Bo Jin and published by MDPI. This book was released on 2020-03-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers from the section “Multisensor Information Fusion”, from Sensors between 2018 to 2019. It focuses on the latest research results of current multi-sensor fusion technologies and represents the latest research trends, including traditional information fusion technologies, estimation and filtering, and the latest research, artificial intelligence involving deep learning.

Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.

Download or read book Manufacturing Processes 1 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series on manufacturing processes for engineers is a reference work for scientific and industrial experts. This volume on Turning, Milling and Drilling starts from the basic principles of machining with geometrically defined cutting edges based on a common active principle. In addition, appropriate tool designs as well as the reasonable use of cutting material are presented. A detailed chapter about the machinability of the most important workpiece materials, such as steel and cast iron, light metal alloys and high temperature resistant materials imparts a broad knowledge of the interrelations between workpiece materials, cutting materials and process parameters. This book is in the RWTHedition Series as are the other four volumes of the reference work.

Download or read book Smart Machining Systems written by Kunpeng Zhu and published by Springer Nature. This book was released on 2021-11-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the tools to enhance the precision, automation and intelligence of modern CNC machining systems. Based on a detailed description of the technical foundations of the machining monitoring system, it develops the general idea of design and implementation of smart machining monitoring systems, focusing on the tool condition monitoring system. The book is structured in two parts. Part I discusses the fundamentals of machining systems, including modeling of machining processes, mathematical basics of condition monitoring and the framework of TCM from a machine learning perspective. Part II is then focused on the applications of these theories. It explains sensory signal processing and feature extraction, as well as the cyber-physical system of the smart machining system. Its utilisation of numerous illustrations and diagrams explain the ideas presented in a clear way, making this book a valuable reference for researchers, graduate students and engineers alike.

Download or read book Precision Product Process Design and Optimization written by Sanjay S. Pande and published by Springer. This book was released on 2018-04-18 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to various tools and techniques for the design of precision, miniature products, assemblies and associated manufacturing processes. In particular, it focuses on precision mechanisms, robotic devices and their control strategies, together with case studies. In the context of manufacturing process, the book highlights micro/nano machining/forming processes using non-conventional energy sources such as lasers, EDM (electro-discharge machining), ECM (electrochemical machining), etc. Techniques for achieving optimum performance in process modeling, simulation and optimization are presented. The applications of various research tools such as FEM (finite element method), neural networks, genetic algorithms, etc. to product-process design and optimization are illustrated through case studies. The state-of-the-art material presented here provides valuable directions for product development and future research work in this area. The contents of this book will be of use to researchers and industry professionals alike.

Download or read book Advanced Automation Techniques in Adaptive Material Processing written by Xiaoqi Chen and published by World Scientific. This book was released on 2002 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the editors' research as well as related recent findings on the applications of modern technologies in electrical and electronic engineering to the automation of some of the common manufacturing processes that have traditionally been handled within the mechanical and material engineering disciplines.In particular, the book includes the latest research results achieved through applied research and development projects over the past few years at the Gintic Institute of Manufacturing Technology, Singapore. It discusses advanced automation technologies such as in-process sensors, laser vision systems, and laser strobe vision, as well as advanced techniques such as sensory signal processing, adaptive process control, fuzzy logic, neural networks, expert systems, laser processing control, etc. The methodologies and techniques are applied to some important material processing applications, including grinding, polishing, machining, and welding. Practical automation solutions, which are complicated by part distortions, tool wear, process dynamics, and variants, are explained.The research efforts featured in the book are driven by industrial needs. They combine theoretical research with practical automation considerations. The techniques developed have been either implemented in the factory or prototyped in the laboratory.

Download or read book Intelligent Production Machines and Systems First I PROMS Virtual Conference written by Duc T. Pham and published by Elsevier. This book was released on 2005-12-09 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2005 Virtual International Conference on IPROMS took place on the Internet between 4 and 15 July 2005. IPROMS 2005 was an outstanding success. During the Conference, some 4168 registered delegates and guests from 71 countries participated in the Conference, making it a truly global phenomenon. This book contains the Proceedings of IPROMS 2005. The 107 peer-reviewed technical papers presented at the Conference have been grouped into twelve sections, the last three featuring contributions selected for IPROMS 2005 by Special Sessions chairmen: - Collaborative and Responsive Manufacturing Systems- Concurrent Engineering- E-manufacturing, E-business and Virtual Enterprises- Intelligent Automation Systems- Intelligent Decision Support Systems- Intelligent Design Systems- Intelligent Planning and Scheduling Systems- Mechatronics- Reconfigurable Manufacturing Systems- Tangible Acoustic Interfaces (Tai Chi)- Innovative Production Machines and Systems- Intelligent and Competitive Manufacturing Engineering