EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Monitoring of the Machining Process by Means of Acoustic Emission Sensors

Download or read book Monitoring of the Machining Process by Means of Acoustic Emission Sensors written by DA. Dornfeld and published by . This book was released on 1991 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research over the last several years has established the effectiveness of acoustic emission (AE) based sensing methodologies for machine condition analysis and process monitoring. Acoustic emission has been proposed and evaluated for a variety of sensing tasks as well as for use as a technique for quantitative studies of manufacturing processes. This paper discusses some of the motivations and requirements for sensing in automated or untended machining processes as well as reviews the research on acoustic emission (AE) sensing of tool condition (wear and fracture) in machining. The background for AE generation in metal cutting and its relationship to the condition of the cutting tool for single and multiple point tools (turning and milling) is presented. Research results will be summarized relating to the sensitivity of AE signals to process changes, AE signal sensitivity to tool condition in turning and milling for wear and fracture, AE signal processing methodologies for feature extraction including time series modeling to remove influences of machining conditions on wear tracking and AE sensor fusion using neural networks for process monitoring with several sensors.

Book Condition Monitoring and Control for Intelligent Manufacturing

Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.

Book Machining Process Characterization and Intelligent Tool Condition Monitoring Using Acoustic Emission Signal Analysis

Download or read book Machining Process Characterization and Intelligent Tool Condition Monitoring Using Acoustic Emission Signal Analysis written by Sabbir Sajjad Rangwala and published by . This book was released on 1988 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Precision Manufacturing

Download or read book Precision Manufacturing written by David A. Dornfeld and published by Springer Science & Business Media. This book was released on 2007-11-22 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Manufacturing provides an introduction to precision engineering for manufacturing. With an emphasis on design and performance of precision machinery for manufacturing – machine tool elements and structure, sources of error, precision machining processes and process models sensors for process monitoring and control, metrology, actuators, and machine design. This book will be of interest to design engineers, quality engineers and manufacturing engineers, academics and those who may or may not have previous experience with precision manufacturing, but want to learn more.

Book Monitoring and Analysis of Ultra precision Machining Processes Using Acoustic Emission

Download or read book Monitoring and Analysis of Ultra precision Machining Processes Using Acoustic Emission written by Xuemei Chen and published by . This book was released on 1998 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Monitoring of Hybrid Manufacturing Using Acoustic Emission Sensor

Download or read book Monitoring of Hybrid Manufacturing Using Acoustic Emission Sensor written by Haythem Gaja and published by . This book was released on 2018 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The approach of hybrid manufacturing addressed in this research uses two manufacturing processes, one process builds a metal part using laser metal deposition, and the other process finishes the part using a milling machining. The ability to produce complete functioning parts in a short time with minimal cost and energy consumption has made hybrid manufacturing popular in many industries for parts repair and rapid prototyping. Monitoring of hybrid manufacturing processes has become popular because it increases the quality and accuracy of the parts produced and reduces both costs and production time. The goal of this work is to monitor the entire hybrid manufacturing process. During the laser metal deposition, the acoustic emission sensor will monitor the defect formation. The acoustic emission sensor will monitor the depth of cut during milling machining. There are three tasks in this study. The first task addresses depth-of-cut detection and tool-workpiece engagement using an acoustic emission monitoring system during milling machining for a deposited material. The second task, defects monitoring system was proposed to detect and classify defects in real time using an acoustic emission (AE) sensor and an unsupervised pattern recognition analysis (K-means clustering) in conjunction with a principal component analysis (PCA). In the third task, a study was conducted to investigate the ability of AE to detect and identify defects during laser metal deposition using a Logistic Regression Model (LR) and an Artificial Neural Network (ANN)"--Abstract, page iv.

Book Techniques for Precision Manufacturing Process Monitoring with Acoustic Emission

Download or read book Techniques for Precision Manufacturing Process Monitoring with Acoustic Emission written by Dan Echizenya and published by . This book was released on 2004 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Structural Health Monitoring Damage Detection Systems for Aerospace

Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.

Book Acoustic Emission Testing

Download or read book Acoustic Emission Testing written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2008-07-12 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission (AE) techniques have been studied in civil engineering for a long time. The techniques are recently going to be more and more applied to practical applications and to be standardized in the codes. This is because the increase of aging structures and disastrous damages due to recent earthquakes urgently demand for maintenance and retrofit of civil structures in service for example. It results in the need for the development of advanced and effective inspection techniques. Thus, AE techniques draw a great attention to diagnostic applications and in material testing. The book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes.

Book Monitoring Tool Wear Process in Turning Machine Using Acoustic Emission Technique

Download or read book Monitoring Tool Wear Process in Turning Machine Using Acoustic Emission Technique written by Azlan Mohd Saini and published by . This book was released on 2010 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project have been conducted in an attempt to monitor the changing of tool wear caused by increasing the cutting speed, through the variation of acoustic emission in turning process, under different feed and depth of cut. The signal-processing analysis was done on the raw signal, on the Acoustic Emission, signal filtered using a high bandpass and on the Acoustic Emission signal filtered using a smaller bandpass. The relationship among several parameters of Acoustic Emission such as zero crossing rate and standard deviation of Acoustic Emission was established. The material machined was mild steel and uncoated carbide cutting tool. The cutting force was also monitored. The results show that acoustic emission can be a good way to monitor on line the growth of tool wear in turning process and therefore can be useful for establishing the end of tool life in these operations. Based on the results obtained pointing out the best Acoustic Emission parameters to monitor tool wear, a set-up is proposed to reach to this goal of project.

Book Acoustic Emission

Download or read book Acoustic Emission written by Wolfgang Sachse and published by ASTM International. This book was released on 1991 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the symposium held in Charlotte, NC, March 1989, examine the phenomenon in which elastic or stress waves are emitted from a rapid, localized change of strain energy in a material. The first section focuses on AE sensors and systems. The second deals with fundamental investigation

Book Monitoring and Control of Machining Processes Using Neural Networks

Download or read book Monitoring and Control of Machining Processes Using Neural Networks written by Gi Sang Choi and published by . This book was released on 1990 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Handbook of Manufacturing Engineering and Technology

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Book Monitoring the Precision Machining Process

Download or read book Monitoring the Precision Machining Process written by Jia-Jay Bill Liu and published by . This book was released on 1991 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Acoustic Emission Monitoring and Analysis in Manufacturing

Download or read book Acoustic Emission Monitoring and Analysis in Manufacturing written by American Society of Mechanical Engineers. Winter Meeting and published by . This book was released on 1984 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: