Download or read book Moldflow Design Guide written by Jay Shoemaker and published by Hanser Publications. This book was released on 2006 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origins of this book not only include Moldflow Design Principles, but also includes Warpage Design Principles published by Moldflow, and C-Mold Design Guide. Collectively, these documents are based on years of experience in the research, theory and practice of injection molding. These documents are now combined into one book, the Moldflow Design Principles. This book is intended to help practicing engineers solve problems they encounter frequently in the design of parts and molds, as will as during production. This book can also be used as a reference for training purpose at industrial, as well as educational institutions.
Download or read book Molding Simulation Theory and Practice written by Maw-Ling Wang and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2018-06-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in full color. The book is conceptually divided into three parts: Chapters 1–5 introduce the fundamentals of injection molding, focusing the factors governing molding quality and how molding simulation methodology is developed. As they are essential to molding quality, the rheological, thermodynamic, thermal, mechanical, kinetic properties of plastics are fully elaborated in this part, as well as curing kinetics for thermoset plastics. Chapters 6–11 introduce CAE verification of design, a valuable tool for both part and mold designers toward avoiding molding problems in the design stage and to solve issues encountered in injection molding. This part covers design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12–17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-Injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding, and integrated circuit packaging. The authors come from the creative simulation team at CoreTech System (Moldex3D), winner of the PPS James L. White Innovation Award 2015. Several CAE case study exercises for execution in the Moldex3D software are included to allow readers to practice what they have learned and test their understanding.
Download or read book Injection Mold Design Engineering written by David O. Kazmer and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the "big picture" before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to "real world" mold design applications. It should help students and practitioners to understand the inner workings of injection molds and encourage them to think "outside the box" in developing innovative and highly functional mold designs. Contents: · Introduction to mold functions, types, and components · Review of design for injection molding · Cost estimation and optimization · Mold layout design including cavity layout, sizing, and materials selection · Cavity, runner system, and gating analysis and design · Cooling system analysis and design · Venting, shrinkage, and warpage analysis and strategies · Ejection force analysis and ejection system designs · Stress and deflection analysis with structural system designs · A survey of advanced mold designs
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Download or read book Total Quality Process Control for Injection Molding written by M. Joseph Gordon, Jr. and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.
Download or read book Flow Analysis of Injection Molds written by Peter K. Kennedy and published by Hanser Pub Incorporated. This book was released on 2012-09-30 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the importance of injection molding as a process as well as the simulation industry that supports it, there was a need for a book that deals solely with the modeling and simulation of injection molding. This book meets that need. The modeling and simulation details of filling, packing, residual stress, shrinkage, and warpage of amorphous, semi-crystalline, and fiber-filled materials are described. This book is essential for simulation software users, as well as for graduate students and researchers who are interested in enhancing simulation. And for the specialist, numerous appendices provide detailed information on the topics discussed in the chapters.
Download or read book Plastics Processing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.
Download or read book Manufacturing Processes for Design Professionals written by Rob Thompson and published by Thames & Hudson. This book was released on 2007-11-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An encyclopaedic guide to production techniques and materials for product and industrial designers, engineers, and architects. Today's product designers are presented with a myriad of choices when creating their work and preparing it for manufacture. They have to be knowledgeable about a vast repertoire of processes, ranging from what used to be known as traditional "crafts" to the latest technology, to enable their designs to be manufactured effectively and efficiently. Information on the internet about such processes is often unreliable, and search engines do not usefully organize material for designers. This fundamental new resource explores innovative production techniques and materials that are having an impact on the design industry worldwide. Organized into four easily referenced parts—Forming, Cutting, Joining, and Finishing—over seventy manufacturing processes are explained in depth with full technical descriptions; analyses of the typical applications, design opportunities, and considerations each process offers; and information on cost, speed, and environmental impact. The accompanying step-by-step case studies look at a product or component being manufactured at a leading international supplier. A directory of more than fifty materials includes a detailed technical profile, images of typical applications and finishes, and an overview of each material's design characteristics. With some 1,200 color photographs and technical illustrations, specially commissioned for this book, this is the definitive reference for product designers, 3D designers, engineers, and architects who need a convenient, highly accessible, and practical reference.
Download or read book Automotive Plastics and Composites written by Joseph P. Greene and published by Elsevier. This book was released on 2021-06-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material, and considers the manufacture, processing, properties, shrinkage, and possible applications, in each case. Two chapters on polymer processing provide detailed information on both closed-mold and open-mold processing. The final chapters explain other key aspects, such as recycling and sustainability, design principles, tooling, and future trends. This book is an ideal reference for plastics engineers, product designers, technicians, scientists, and R&D professionals who are looking to develop materials, components, or products for automotive applications. The book also intends to guide researchers, scientists, and advanced students in plastics engineering, polymer processing, and materials science and engineering. Analyzes mechanical, chemical, physical, and thermal properties, enabling the reader to select the appropriate material for specific applications Explains polymer processing, with thorough coverage of operations across both closed-mold and open-mold processing Provides systematic coverage of materials, including commodity and engineering thermoplastics, bio-based plastics, thermosets, composites, elastomeric polymers, and 3D-printed plastics
Download or read book Troubleshooting Injection Moulding written by Vannessa Goodsgip and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Injection moulding is one of the most commonly used processing technologies for plastics materials. Proper machine set up, part and mould design, and material selection can lead to high quality production. This review outlines common factors to check when preparing to injection mould components, so that costly mistakes can be avoided. This review examines the different types of surface defects that can be identified in plastics parts and looks at ways of solving these problems. Useful flow charts to illustrate possible ways forward are included. Case studies and a large b257 of figures make this a very useful report.
Download or read book Runner and Gating Design Handbook 3e written by John P. Beaumont and published by . This book was released on 2019-10-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, both the art and the science of designing runners and gates are presented in a concise format. Tried and true runner and gating design techniques successfully used with various materials and molding applications are described together with cutting edge new technologies. The book will help readers determine when to use what type of runner system and how to isolate molding problems generated by the gate and runner vs. other molding issues. Much emphasis is placed on the critical features in a hot runner design and how to determine what type of design is best for a specific application. Finally, readers will be able to separate the sales hype from reality when dealing with hot runner suppliers.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Automated system for designing gating system of sand casting written by Dr. Chandan Deep Singh and published by BookRix. This book was released on 2018-01-15 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing in sand casting is a critical activity for manufacturing. Further, activities like cavity design, cavity layout and design of gating system are essential in design. Design of gating system in sand casting is dependent upon a various parameters. Gating system design requires lot of manual input and a number of iterations to finalize the design. This requires a good knowledge of casting process, making this activity completely dependent on the user. In present day industry, lot of CAD/CAM tools are applied for design, development and manufacturing. However, need of sand casting expert throughout design and manufacturing makes it a quite lengthy process. Gating system design being one of the major activities also takes much time. Therefore, it would be quite beneficial to develop a system for automated generation of gating system. Proposed system takes CAD file of the die casting part as input and uses sand casting process, machine and alloy knowledge to determine different parameters for the gating system. Designs of the components of the gating system like runner, gate and overflow have been attempted. A feature library has been proposed as a part of this work which together with parametric design of the gating system generates CAD model of the components of the gating system. The system would go a long way in bridging the gap between designing and manufacturing of die-casting.
Download or read book How to Make Injection Molds written by Georg Menges and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-03-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic success in the plastics processing industry depends on the quality, precision, and reliability of its most common tool: the injection mold. Consequently, misjudgments in design and mistakes in the manufacturing of molds can result in grave consequences. This comprehensive handbook for the design and manufacture of injection molds covers all aspects of how to successfully make injection molds from a practical as well as from a theoretical point of view. It should serve as an indispensable reference work for everyone engaged in mold making. "...an example of how books should be written ... will be used by molders, mold designers and mold makers and will become a standard." (Polymer News) Contents: · Materials for Injection Molds · Mold Making Techniques · Estimating Mold Costs · The Injection Molding Process · Design of Runner Systems · Design of Gates · Venting of Molds · Heat Exchange System · Shrinkage · Mechanical Design · Shifting of Cores · Ejection · Alignment and Changing of Molds · Computer-Aided Mold Design and Construction · Maintenance of Injection Molds · Measuring in Injection Molds · Temperature Controllers · Mold Standards · Correction of Molding Defects · Special Processes - Special Molds
Download or read book Handbook of Biopolymers and Biodegradable Plastics written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers and Biodegradable Plastics are a hot issue across the Plastics industry, and for many of the industry sectors that use plastic, from packaging to medical devices and from the construction indusry to the automotive sector. This book brings together a number of key biopolymer and biodegradable plastics topics in one place for a broad audience of engineers and scientists, especially those designing with biopolymers and biodegradable plastics, or evaluating the options for switching from traditional plastics to biopolymers. Topics covered include preparation, fabrication, applications and recycling (including biodegradability and compostability). Applications in key areas such as films, coatings controlled release and tissue engineering are discussed. Dr Ebnesajjad provides readers with an in-depth reference for the plastics industry – material suppliers and processors, bio-polymer producers, bio-polymer processors and fabricators – and for industry sectors utilizing biopolymers – automotive, packaging, construction, wind turbine manufacturers, film manufacturers, adhesive and coating industries, medical device manufacturers, biomedical engineers, and the recycling industry. Essential information and practical guidance for engineers and scientists working with bioplastics, or evaluating a migration to bioplastics. Includes key published material on biopolymers, updated specifically for this Handbook, and new material including coverage of PLA and Tissue Engineering Scaffolds. Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design decisions.
Download or read book Tool and Manufacturing Engineers Handbook Plastic Part Manufacturing written by Philip Mitchell and published by Society of Manufacturing Engineers. This book was released on 1996-12-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.