Download or read book Modified 9Cr 1Mo Steel for Advanced Steam Generator Applications written by Philip Maziasz and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results are reported from several types of mechanical property tests conducted on a number of commercial heats of modified 9Cr-1Mo steel. Data from long term creep-rupture tests conducted on base and weldment material were compared with an analytical model which has been shown to give good agreement between measured and predicted values. Weldment material had somewhat inferior creep-rupture strength in comparison to base material due to a soft zone at the edge of the HAZ. Data are presented from elevated temperature tensile and creep-rupture tests conducted n material thermally aged for periods of up to 75,000 h (8.6 years). Some reduction in strength was shown to occur in comparison to unaged material. Models were developed for predicting the reduction in short term elevated temperature tensile and yield strength for material thermally aged in the temperature range of 482 to 704°C. Results from Charpy impact tests conducted on material thermally aged at 538°C for periods of up to 75,000 h showed an increase in the ductile-brittle transition temperature. Finally, results from transmission electron microscopy studies were presented to explain changes in mechanical properties due to thermal aging. These observations showed that Laves phase precipitation and recovery occurs on prolonged exposure of this alloy in this temperature range.
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Advanced Power Engineering 1994 written by D. Coutsouradis and published by Springer Science & Business Media. This book was released on 1994 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of energy in the modern world goes beyond mere technology and economics to influence welfare, the environment, the quality of life and, in broad terms, civilization itself. Since the Industrial Revolution, energy conservation technology has been at the forefront of the innovation required to satisfy the needs of mankind and, more than any other, this technology has always depended on the performance of the materials used.
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Materials Components in Fossil Energy Applications written by and published by . This book was released on 1980 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ferritic Steels for High temperature Applications written by Ashok K. Khare and published by . This book was released on 1983 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Materials Technology for Fossil Power Plants written by Ramaswamy Viswanathan and published by ASM International. This book was released on 2005-01-01 with total page 1399 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Service and Time dependent Failure written by R. W. Swindeman and published by . This book was released on 1993 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Alloys for Power Plants written by A. Shirzadi and published by Elsevier. This book was released on 2014-07-30 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.
Download or read book Energy and Water Development Appropriations for 1985 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1984 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Congressional Budget Request written by United States. Department of Energy and published by . This book was released on 1984 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2014 Energy Materials Conference written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DVD contains a collection of papers presented at EnergyMaterials 2014, a conference organized jointly by The ChineseSociety for Metals (CSM) and The Minerals, Metals & MaterialsSociety (TMS), and held November 4-6, 2014, in Xi’an, ShaanxiProvince, China. With the rapid growth of the world’s energyproduction and consumption, the important role of energy materialshas achieved worldwide acknowledgement. Material producers andconsumers constantly seek the possibility of increasing strength,improving fabrication and service performance, simplifyingprocesses, and reducing costs. Energy Materials 2014 has provided aforum for academics, researchers, and engineers around the world toexchange state-of-the-art development and information on issuesrelated to energy materials. The papers on the DVD are organized around the followingtopics: Materials for Coal-Based Systems Materials for Gas Turbine Systems Materials for Nuclear Systems Materials for Oil and Gas Materials for Pressure Vessels
Download or read book The Nano Micro Interface written by Marcel Van de Voorde and published by John Wiley & Sons. This book was released on 2015-01-12 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the properties of materials by modifying their composition and by manipulating the arrangement of atoms and molecules is a dream that can be achieved by nanotechnology. As one of the fastest developing and innovative -- as well as well-funded -- fields in science, nanotechnology has already significantly changed the research landscape in chemistry, materials science, and physics, with numerous applications in consumer products, such as sunscreens and water-repellent clothes. It is also thanks to this multidisciplinary field that flat panel displays, highly efficient solar cells, and new biological imaging techniques have become reality. This second, enlarged edition has been fully updated to address the rapid progress made within this field in recent years. Internationally recognized experts provide comprehensive, first-hand information, resulting in an overview of the entire nano-micro world. In so doing, they cover aspects of funding and commercialization, the manufacture and future applications of nanomaterials, the fundamentals of nanostructures leading to macroscale objects as well as the ongoing miniaturization toward the nanoscale domain. Along the way, the authors explain the effects occurring at the nanoscale and the nanotechnological characterization techniques. An additional topic on the role of nanotechnology in energy and mobility covers the challenge of developing materials and devices, such as electrodes and membrane materials for fuel cells and catalysts for sustainable transportation. Also new to this edition are the latest figures for funding, investments, and commercialization prospects, as well as recent research programs and organizations.
Download or read book Creep Performance of Modified 9Cr 1Mo Steel Alloys In Steam Environment written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Energy Materials 2014 written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2017-03-16 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:
