Download or read book Nanostructured Materials and their Applications written by Bibhu Prasad Swain and published by Springer Nature. This book was released on 2020-10-28 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to nanostructured materials and guides the reader through their different engineering applications. It gives an overview of nanostructured materials applied in the fields of physics, chemistry, biology, medicine, and materials science. Materials for different applications in engineering such as those used in opto-electronics, energy, tribology, bio-applications, catalysis, reinforcement and many more have been described in this book. The book will be of interest to researchers and students who want to learn about applications of nanostructured materials in engineering.

Download or read book Coatings Tribology written by Braham Prakash and published by MDPI. This book was released on 2021-03-12 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few decades have seen rapid development in the field of surface engineering and its applications in almost all industrial sectors. Tribological coatings, which are an important aspect of surface engineering, are today applied on machine component surfaces for a diverse range of moving machine components to control (mostly to minimize) friction and wear in order to conserve energy and materials. This reprint book is a compilation of 11 research papers contributed by experts in the field of surface engineering and tribology. These papers have dealt with the synthesis of various types of coatings, characterization and applications under different operating conditions. It is hoped that this reprint book will be of interest, not only to researchers, but also to practicing engineers and technologists in the industry.

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Diamond like Carbon Films written by Yuto S. Tanaka and published by Nova Biomedical Books. This book was released on 2012-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research from across the globe in the study of diamond-like carbon films. Topics discussed include the peculiarities of ion-beam synthesis of carbon-based phases; electron field emission properties of non-metal and metal doped diamond like carbon; internal stress and its reduction of hydrogenated diamond-like carbon thin films deposited by plasma CVD methods; incorporating crystalline diamond particles in diamond-like carbon films to improve their properties and diamond-like carbon films applied as an alignment layer for LCDs.

Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.

Download or read book Chemical Vapor Deposition for Nanotechnology written by Pietro Mandracci and published by BoD – Books on Demand. This book was released on 2019-01-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical vapor deposition (CVD) techniques have played a major role in the development of modern technology, and the rise of nanotechnology has further increased their importance, thanks to techniques such as atomic layer deposition (ALD) and vapor liquid solid growth, which are able to control the growth process at the nanoscale. This book aims to contribute to the knowledge of recent developments in CVD technology and its applications. To this aim, important process innovations, such as spatial ALD, direct liquid injection CVD, and electron cyclotron resonance CVD, are presented. Moreover, some of the most recent applications of CVD techniques for the growth of nanomaterials, including graphene, nanofibers, and diamond-like carbon, are described in the book.

Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.

Download or read book Superlubricity written by Ali Erdemir and published by Elsevier. This book was released on 2007-03-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superlubricity is defined as a sliding regime in which friction or resistance to sliding vanishes. It has been shown that energy can be conserved by further reducing/removing friction in moving mechanical systems and this book includes contributions from world-renowned scientists who address some of the most fundamental research issues in overcoming friction. Superlubricity reviews the latest methods and materials in this area of research that are aimed at removing friction in nano-to-micro scale machines and large scale engineering components. Insight is also given into the atomic-scale origins of friction in general and superlubricity while other chapters focus on experimental and practical aspects or impacts of superlubricity that will be very useful for broader industrial community.* Reviews the latest fundamental research in superlubricity today* Presents 'state-of-the-art' methods, materials, and experimental techniques* Latest developments in tribomaterials, coatings, and lubricants providing superlubricity

Download or read book Handbook of Ionic Substituted Hydroxyapatites written by Abdul Samad Khan and published by Woodhead Publishing. This book was released on 2019-11-16 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Ionic Substituted Hydroxyapatites provides scientists and researchers with comprehensive information on the synthesis processes of hydroxyapatite, also explaining the application of substituted hydroxyapatite. The book's content is very structured and explanatory, starting with a detailed overview of biological apatite in bones and teeth, as well as a presentation of the analytical tools for hydroxyapatite. Bioceramics and the relative modern and emerging processing techniques are covered, as is 3-D printing, which has gained increasing importance within biomedical materials and in the use of hydroxyapatite in tissue engineering. Finally, the advantages and disadvantages of using ionic substitutions in clinical application are presented. Students and researchers in disciplines, such as Material Science, Ceramics, and Bioengineering will find this book to be very helpful in their work. It will also be a valuable resource for practitioners and surgeons in orthopedics, perio/implantology and maxillo-facial disciplines, and professionals working in R&D in ceramics and pharmaceuticals. - Provides responses to the lack of scientific information about hydroxyapatites for biomedical applications - Solves researchers' issues regarding phase changes with respect to substituted ions and how these substitutions can alter/improve the properties of stoichiometric hydroxyapatite - Explains modern clinical applications and the effects of apatites within biomedical applications - Includes both the advantages and disadvantages of using ionic substitutions in clinical application

Download or read book Cellular Response to Biomaterials written by Lucy Di Silvio and published by Elsevier. This book was released on 2008-12-22 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The response of cells to biomaterials is critical in medical devices. Traditionally inert biomaterials were used to minimise the reaction in cells in contact with the material. However, it has been realised that specific cell responses may be beneficial in such areas as encouraging adhesion, healing or cell multiplication. Cellular response to biomaterials discusses the response of cells to a wide range of biomaterials targeted at specific medical applications.Part one discusses cell responses to a variety of polymers and ceramics with chapters on such topics as degradable polymers and biocompatibility. Part two covers cell responses and regenerative medicine with coverage of themes such as vascular grafts, nerve repair and Bioglass®. Part three examines the effect of surfaces and proteins on cell response. Specific chapters review nano-engineered surfaces, the influence of plasma proteins on bone cell adhesion and surface modification of titanium implants.With its distinguished editor and team of international contributors, Cellular response to biomaterials is an essential read for those researching or studying medical devices in industry and academia. - Examines the response of cells to a wide range of biomaterials targeted at specific medical applications - Discusses cell responses and regenerative medicine with specific chapters on vascular grafts and nerve repair - Assesses the effect of surfaces and proteins on cell response including the influence of plasma proteins on cell adhesion and surface modification of titanium implants

Download or read book Tribology and Characterization of Surface Coatings written by Sarfraj Ahmed and published by John Wiley & Sons. This book was released on 2022-01-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.

Download or read book Biomaterials for Artificial Organs written by Michael Lysaght and published by Elsevier. This book was released on 2010-12-20 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The worldwide demand for organ transplants far exceeds available donor organs. Consequently some patients die whilst waiting for a transplant. Synthetic alternatives are therefore imperative to improve the quality of, and in some cases, save people's lives. Advances in biomaterials have generated a range of materials and devices for use either outside the body or through implantation to replace or assist functions which may have been lost through disease or injury. Biomaterials for artificial organs reviews the latest developments in biomaterials and investigates how they can be used to improve the quality and efficiency of artificial organs.Part one discusses commodity biomaterials including membranes for oxygenators and plasmafilters, titanium and cobalt chromium alloys for hips and knees, polymeric joint-bearing surfaces for total joint replacements, biomaterials for pacemakers, defibrillators and neurostimulators and mechanical and bioprosthetic heart valves. Part two goes on to investigate advanced and next generation biomaterials including small intestinal submucosa and other decullarized matrix biomaterials for tissue repair, new ceramics and composites for joint replacement surgery, biomaterials for improving the blood and tissue compatibility of total artificial hearts (TAH) and ventricular assist devices (VAD), nanostructured biomaterials for artificial tissues and organs and matrices for tissue engineering and regenerative medicine.With its distinguished editors and international team of contributors Biomaterials for artificial organs is an invaluable resource to researchers, scientists and academics concerned with the advancement of artificial organs. - Reviews the latest developments in biomaterials and investigates how they can be used to improve the quality and efficiency of artificial organs - Discusses commodity biomaterials including membranes for oxygenators and cobalt chromium alloys for hips and knees and polymeric joint-bearing surfaces for total joint replacements - Further biomaterials utilised in pacemakers, defibrillators, neurostimulators and mechanical and bioprosthetic heart valve are also explored

Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1997 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Applications of Diamond written by Awadesh Mallik and published by BoD – Books on Demand. This book was released on 2021-08-18 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond offers many advantages over other wide-bandgap materials and thus is a very important material in engineering applications. It can be used in high-speed electronics and response systems as well as high-power laser windows, protective coatings, electrochemical sensors, and more. This book examines the properties, advantages, and potential applications of diamonds in engineering and other fields.

Download or read book The Foundations of Vacuum Coating Technology written by Donald M. Mattox and published by William Andrew. This book was released on 2018-08-21 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Foundations of Vacuum Coating Technology, Second Edition, is a revised and expanded version of the first edition, which was published in 2003. The book reviews the histories of the various vacuum coating technologies and expands on the history of the enabling technologies of vacuum technology, plasma technology, power supplies, and low-pressure plasma-enhanced chemical vapor deposition. The melding of these technologies has resulted in new processes and products that have greatly expanded the application of vacuum coatings for use in our everyday lives. The book is unique in that it makes extensive reference to the patent literature (mostly US) and how it relates to the history of vacuum coating. The book includes a Historical Timeline of Vacuum Coating Technology and a Historical Timeline of Vacuum/Plasma Technology, as well as a Glossary of Terms used in the vacuum coating and surface engineering industries. - History and detailed descriptions of Vacuum Deposition Technologies - Review of Enabling Technologies and their importance to current applications - Extensively referenced text - Patents are referenced as part of the history - Historical Timelines for Vacuum Coating Technology and Vacuum/Plasma Technology - Glossary of Terms for vacuum coating

Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.