Download or read book Modern Power Station Practice written by P.M. Reynolds and published by Elsevier. This book was released on 2013-10-22 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains two additional features which enhance the value of Modern Power Station Practice as a whole: a cumulative subject index and a detailed list of tables of contents for the entire work. The cumulative index provides access to the vast body of information presented in the set, and also indicates at a glance the breadth and depth of the treatment through the use of inclusive page ranges for major topics. In order to allow the reader the greatest flexibility in using the index there are many cross-references. The entries themselves are qualified by up to two descriptive subheadings to allow the most detailed coverage possible of the subject matter. The reproduction of the tables of contents for each volume also provides an overview of the organisation of the individual volumes.
Download or read book Modern Power Station Practice written by P. Hambling and published by Pergamon. This book was released on 1991 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of new 500 MW and 660 MW turbine generator plant in nuclear, coal- and oil-fired power stations has been partly responsible for the increase in generating capacity of the CEGB over the last 30 years. This volume provides a detailed account of experience gained in the development, design, manufacture, operation and testing of large turbine-generators in the last 20 years. With the advance in analytical and computational techniques, the application of this experience to future design and operation of large turbine-generator plant will be of great value to engineers in the industry.
Download or read book The Mechanical World written by and published by . This book was released on 1906 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Transactions of ASME written by and published by . This book was released on 1923 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Energy Principles Practices Prospects written by S.K. Agarwal and published by APH Publishing. This book was released on 2003 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electric Utility Systems and Practices written by Homer M. Rustebakke and published by John Wiley & Sons. This book was released on 1983-08-16 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the essential components, operation and protection of the electric power system in a single volume. Discusses how the system operation and components are protected from abnormal operation such as short circuits, and the generation, transmission and distribution of electrical power. Presents information on how electric power is transmitted (energy from generator to load), and provides insights into the nature of the electric utility business.
Download or read book Operator s Guide to General Purpose Steam Turbines written by Robert X. Perez and published by John Wiley & Sons. This book was released on 2016-07-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: When installed and operated properly, general purpose steam turbines are reliable and tend to be forgotten, i.e., out of sound and out of mind. But, they can be sleeping giants that can result in major headaches if ignored. Three real steam turbine undesirable consequences that immediately come to mind are: Injury and secondary damage due to an overspeed failure. An overspeed failure on a big steam or gas turbine is one of the most frightening of industrial accidents. The high cost of an extensive overhaul due to an undetected component failure. A major steam turbine repair can cost ten or more times that of a garden variety centrifugal pump repair. Costly production loses due an extended outage if the driven pump or compressor train is unspared. The value of lost production can quickly exceed repair costs. A major goal of this book is to provide readers with detailed operating procedure aimed at reducing these risks to minimal levels. Start-ups are complicated by the fact that operators must deal with numerous start-up scenarios, such as: Commissioning a newly installed steam turbine Starting ups after a major steam turbine repair Starting up a proven steam turbine after an outage Overspeed trip testing It is not enough to simply have a set of procedures in the control room for reference. To be effective, operating procedures must be clearly written down, taught, and practiced—until they become habit.
Download or read book Handbook of Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2003-05-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.
Download or read book Annual Catalogue written by Montana State College of Agriculture and Mechanic Arts and published by . This book was released on 1907 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book University of Michigan Official Publication written by and published by UM Libraries. This book was released on 1951 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Power Plants written by Robin A. Chaplin and published by Encyclopedia of Life Support Systems. This book was released on 2009-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants theme is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. The Theme on Thermal Power Plants presents three main topics which are then expanded into multiple subtopics, each as a chapter. The first topic covers the basic theory including fossil fuel combustion, nuclear fission, thermal fluids and thermodynamic cycles. It then deals with those aspects important to the maintenance of high efficiency and good reliability such as exergy analysis, material characteristics and life extension. The second topic deals with the production of steam. Although this is only the heat receiving part of the steam cycle it is consistent with the general layout of the power plant where the fossil fuel fired boiler or nuclear fission reactor is a separate and distinct part with its own ancilliary equipment. Fossil boilers and nuclear reactors both produce steam but are so different that each is covered separately in its respective series of chapters. The third topic deals with the generation of power utilizing the steam produced in the boiler or reactor. Several chapters cover steam turbine design and operation. Since power must be produced to exactly match the demand, consideration is given to operational constraints and protective devices. Heat rejection in cooling towers is important where no large body of water exists and is addressed in one chapter. Gas turbines are used for peak power generation and, with steam turbines, for combined cycle plants so are dealt with in two chapters. Conversion of mechanical power from the turbine to electrical power for distribution to the consumer is an important aspect and is covered by the last chapter. These three volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.
Download or read book Indian Industries and Power written by and published by . This book was released on 1909 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Constitution and By laws with List of Members written by Brooklyn Engineers' Club and published by . This book was released on 1901 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Constitution and By laws written by Brooklyn Engineers' Club and published by . This book was released on 1901 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by Brooklyn Engineers' Club and published by . This book was released on 1901 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Franklin Institute written by Franklin Institute (Philadelphia, Pa.) and published by . This book was released on 1900 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
