Download or read book Racing Chassis and Suspension Design written by Carroll Smith and published by SAE International. This book was released on 2004-05-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hand-selected by racing engineer legend Carroll Smith, the 28 SAE Technical Papers in this book focus on the chassis and suspension design of pure racing cars, an area that has traditionally been - farmed out - to independent designers or firms since the early 1970s. Smith believed that any discussion of vehicle dynamics must begin with a basic understanding of the pneumatic tire, the focus of the first chapter. The racing tire connects the racing car to the track surface by only the footprints of its four tires. Through the tires, the driver receives most of the sensory information needed to maintain or regain control of the race car at high force levels. The second chapter, focusing on suspension design, is an introduction to this complex and fascinating subject. Topics covered include chassis stiffness and flexibility, suspension tuning on the cornering of a Winston Cup race car, suspension kinematics, and vehicle dynamics of road racing cars. Chapter 3 addresses the design of the racing chassis design and how aerodynamics affect the chassis, and the final chapter on materials brings out the fact that the modern racing car utilizes carbon construction to the maximum extent allowed by regulations. These technical papers, written between 1971 and 2003, offer what Smith believed to be the best and most practical nuggets of racing chassis and suspension design information.
Download or read book The Modern Chassis written by Hank Elfrink and published by Edizioni Savine. This book was released on 2015-10-21 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: “ We take pleasure in adding this much-needed book to our growing list of automotive titles. It is by far the most comprehensive book ever published in the United States pertaining to chassis design, suspensions, shock absorbers, steering, brakes, weight distribution, and other associated subjects. In this book Engineer Hank Elfrink, the author, has written about technical matters in language that the layman can understand. We hope the book will be of real interest and value to the motor enthusiast. ” Floyd Clymer (Publisher) - Los Angeles, 1951.
Download or read book Chassis Engineering written by Herb Adams and published by Penguin. This book was released on 1992-11-19 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most forms of racing, cornering speed is the key to winning. On the street, precise and predictable handling is the key to high performance driving. However, the art and science of engineering a chassis can be difficult to comprehend, let alone apply. Chassis Engineering explains the complex principles of suspension geometry and chassis design in terms the novice can easily understand and apply to any project. Hundreds of photos and illustrations illustrate what it takes to design, build, and tune the ultimate chassis for maximum cornering power on and off the track.
Download or read book Those Were the Days Weird and Wacky Ads of Yesteryear written by and published by Courier Corporation. This book was released on 2012-04-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historical scrapbook features more than 600 ads from 1890 to 1910. Ads for familiar companies such as Cadillac and Pillsbury appear alongside promotions for the Talk-o-phone, Dr. Scott's Electric Hair Brush, velvet-grip garters, and other curiosities.
Download or read book Chassis Handbook written by Bernhard Heißing and published by Springer Science & Business Media. This book was released on 2010-11-09 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of all the assistance offered by electronic control systems, the latest generation of passenger car chassis still relies on conventional chassis elements. With a view towards driving dynamics, this book examines these conventional elements and their interaction with mechatronic systems. First, it describes the fundamentals and design of the chassis and goes on to examine driving dynamics with a particularly practical focus. This is followed by a detailed description and explanation of the modern components. A separate section is devoted to the axles and processes for axle development. With its revised illustrations and several updates in the text and list of references, this new edition already includes a number of improvements over the first edition.
Download or read book The Automotive Chassis written by Giancarlo Genta and published by Springer Nature. This book was released on 2019-12-24 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook draws on the authors’ experience gained by teaching courses for engineering students on e.g. vehicle mechanics, vehicle system design, and chassis design; and on their practical experience as engineering designers for vehicle and chassis components at a major automotive company. The book is primarily intended for students of automotive engineering, but also for all technicians and designers working in this field. Other enthusiastic engineers will also find it to be a useful technical guide. The present volume (The Automotive Chassis – Volume 1: Component Design) focuses on automotive chassis components, such as:• the structure, which is usually a ladder framework and supports all the remaining components of the vehicle;• the suspension for the mechanical linkage of the wheels;• the wheels and tires;• the steering system;• the brake system; and• the transmission system, used to apply engine torque to the driving wheels. This thoroughly revised and updated second edition presents recent developments, particularly in brake, steering, suspension and transmission subsystems. Special emphasis is given to modern control systems and control strategies.
Download or read book How to Make Your Car Handle written by Fred Puhn and published by Penguin. This book was released on 1987-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: To make your car handle, design a suspension system, or just learn about chassis, you’ll find what you need here. Basic suspension theory is thoroughly covered: roll center, roll axis, camber change, bump steer, anti-dive, ride rate, ride balance and more. How to choose, install and modify suspensions and suspension hardware for best handling: springs, sway bars, shock absorbers, bushings, tired and wheels. Regardless of the basic layout of your car—front engine/rear drive, front engine/front drive, or rear engine/rear drive—it is covered here. Aerodynamic hardware and body modifications for reduced drag, high-speed stability and increased cornering power: spoilers, air dams, wings and ground-effects devices. How to modify and set up brakes for maximum stopping power and handling. The most complete source of handling information available. “Suspension secrets” explained in plain, understandable language so you can be the expert.
Download or read book Chassis Design written by William F. Milliken and published by Wiley-Blackwell. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maurice Olley, one of the great automotive design, research and development engineers of the 20th century, had a career that spanned two continents. Olley is perhaps best known for his systematic approach to ride and handling. His work was so comprehensive that many of the underlying concepts, test procedures, analysis, and evaluation techniques are still used in the auto industry today. Olley’s mathematical analyses cover design essentials in a physically understandable way. Thus they remain as useful today as when they were first developed. For example, they are easily programmed for study or routine use and for checking the results of more complex programs. Chassis Design – Principles and Analysis is based on Olley’s technical writings, and is the first complete presentation of his life’s work. This new book provides insight into the development of chassis technology and its practical application by a master. Many examples are worked out in the text and the analytical developments are underpinned by Olley’s years of design experience. COMPLETE CONTENTS Maurice Olley – his life and times Tyres and steady–state cornering – slip angle effects (primary) Steady–state cornering– steer effects (secondary) Transient cornering Ride Oscillations of the unsprung Suspension linkages Roll, roll moments, and skew rates Fore–and–aft forces Leaf springs – combined suspension spring and linkage Appendices Comprehensive and well–illustrated with over 400 figures and tables, as well as numerous appendices.
Download or read book Motorcycle Handling and Chassis Design written by Tony Foale and published by Tony Foale. This book was released on 2006 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Chassis Engineering written by David C Barton and published by Springer. This book was released on 2018-03-15 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for students and practicing engineers working in automotive engineering, this book provides a fundamental yet comprehensive understanding of chassis systems and requires little prior knowledge on the part of the reader. It presents the material in a practical and realistic manner, using reverse engineering as a basis for examples to reinforce understanding of the topics. The specifications and characteristics of vehicles currently on the market are used to exemplify the theory’s application, and care is taken to connect the various topics covered, so as to clearly demonstrate their interrelationships. The book opens with a chapter on basic vehicle mechanics, which include the forces acting on a vehicle in motion, assuming a rigid body. It then proceeds to a chapter on steering systems, which provides readers with a firm understanding of the principles and forces involved under static and dynamic loading. The next chapter focuses on vehicle dynamics by considering suspension systems—tyres, linkages, springs, dampers etc. The chapter on chassis structures and materials includes analysis tools (typically, finite element analysis) and design features that are used to reduce mass and increase occupant safety in modern vehicles. The final chapter on Noise, Vibration and Harshness (NVH) includes a basic overview of acoustic and vibration theory and makes use of extensive research investigations and practical experience as a means of addressing NVH issues. In all subject areas the authors take into account the latest trends, anticipating the move towards electric vehicles, on-board diagnostic monitoring, active systems and performance optimisation. The book features a number of worked examples and case studies based on recent research projects. All students, including those on Master’s level degree courses in Automotive Engineering, and professionals in industry who want to gain a better understanding of vehicle chassis engineering, will benefit from this book.
Download or read book An Introduction to Modern Vehicle Design written by Julian Happian-Smith and published by Elsevier. This book was released on 2001 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Modern Vehicle Design starts from basic principles and builds up analysis procedures for all major aspects of vehicle and component design. Subjects of current interest to the motor industry - such as failure prevention, designing with modern material, ergonomics, and control systems - are covered in detail, with a final chapter discussing future trends in automotive design. Extensive use of illustrations, examples, and case studies provides the reader with a thorough understanding of design issues and analysis methods.
Download or read book Competition Car Suspension written by Allan Staniforth and published by Haynes Publishing Group. This book was released on 1999 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competition car suspensions are a vital ingredient for winning performance. This third edition has been fully updated to reflect the latest developments and revolutionary changes in racing technology, and in the rules of racing. Staniforth explains the theory and practice of successful suspension engineering, and explores in an easy-to-understand and readable style how and why suspension systems work. Includes coverage of the banning of active suspensions. Updated & expanded 3rd ed.
Download or read book How to Make Your Muscle Car Handle written by Mark Savitske and published by CarTech Inc. This book was released on 2015-05-15 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: When automotive manufacturers stuffed large V-8 engines into intermediate-size cars, the American muscle car was born. Built from 1964 on, the vast majority of these amazingly fast machines did not carry cutting-edge chassis and suspension systems, and now these cars are up to 50 years old. Today, owners do not have to settle for poor handling and ride quality. Muscle car and suspension expert Mark Savitske has built his business, Savitske Classic and Custom, on making muscle cars handle and ride at their best. With this updated edition, Savitske shows you what it takes to transform the handling of these high-horsepower machines. He explains the front and rear suspension geometry so you understand how it functions, and in turn, you realize how to get the most from a particular system. He also reveals the important aspects of spring rates, shock dampening, and ride height so you select the best spring and shock package for your car and application. He discusses popular high-performance tubular suspension arms and sway bars, so you can find the right combination of performance and adjustability. The suspension system has to operate as an integrated part of the car, so you’re shown how to select best suspension package for a well-balanced and responsive car. He also discusses how to extract maximum performance from popular GM, Ford, and Mopar muscle cars. You can harness the potential performance potential of your muscle car and put much more power to the ground with critical chassis and suspension updates and products. A muscle car that carries modern suspension technology not only provides far better handling and ride comfort, but it is also much safer. How to Make Your Muscle Car Handle is the essential guide to unlocking the handling and performance potential of your muscle car. If you yearn for better handling, comfort, and performance for your muscle car, this is the book for you.
Download or read book Traction Engines Worth Modelling written by William Jesse Hughes and published by . This book was released on 1952 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineer to Win written by Carroll Smith and published by Motorbooks International. This book was released on 1984 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Is titanium for you? Can better brakes reduce lap times significantly? How do you choose the rights nuts and bolts? Which is more important, cornering or straight-line speed? Why did it break again? Engineer to Win not only answers these and many other questions, it gives you the reasons why."--Back cover
Download or read book Bicycle Owner s Complete Handbook of Repair and Maintenance written by Steve Kraynick and published by . This book was released on 1953 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock Absorber Handbook written by John C. Dixon and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every one of the many millions of cars manufactured annually worldwide uses shock absorbers, otherwise known as dampers. These form a vital part of the suspension system of any vehicle, essential for optimizing road holding, performance and safety. This, the second edition of the Shock Absorber Handbook (first edition published in 1999), remains the only English language book devoted to the subject. Comprehensive coverage of design, testing, installation and use of the damper has led to the book's acceptance as the authoritative text on the automotive applications of shock absorbers. In this second edition, the author presents a thorough revision of his book to bring it completely up to date. There are numerous detail improvements, and extensive new material has been added particularly on the many varieties of valve design in the conventional hydraulic damper, and on modern developments such as electrorheological and magnetorheological dampers. "The Shock Absorber Handbook, 2nd Edition" provides a thorough treatment of the issues surrounding the design and selection of shock absorbers. It is an invaluable handbook for those working in industry, as well as a principal reference text for students of mechanical and automotive engineering.
