Download or read book Modern Blast Furnace Ironmaking written by Maarten Geerdes and published by IOS Press. This book was released on 2009 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This publication was and can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management. The latter will benefit to solve operational problems and process optimization issues." --Book Jacket.
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2020-11-04 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2015-04-07 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.
Download or read book Blast Furnace Ironmaking written by Ian Cameron and published by Elsevier. This book was released on 2019-10-22 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. Provides sample problems, answers and assignments for each chapter Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates Describes all major blast furnace equipment and best practices Features blast furnace operating data from five continents
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by . This book was released on 2015 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Ironmaking Methods written by R. D. Walker and published by . This book was released on 1986 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Iron Blast Furnace written by J. G. Peacey and published by Elsevier. This book was released on 2016-06-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.
Download or read book Blast Furnace and Steel Plant written by and published by . This book was released on 1921 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Operation of Contemporary Blast Furnaces written by Yuncai Liu and published by Springer Nature. This book was released on 2020-09-15 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on how to keep blast furnaces running stably and smoothly with low consumption and long operating life spans. Assessing and adjusting blast furnace performance are key to operation. The book describes in detail cases of both successful and failed blast furnace operation. It also demonstrates various phenomena and “symptoms” in the smelting process that have rarely been studied before, e.g. abnormal gas distribution, bending loss of tuyere, slag crust fall-off, blast furnace thickening, and hearth accumulation. As such, it will help readers understand internal phenomena in blast furnaces, providing a basis for developing intelligent control and management systems.
Download or read book Models of Blast Furnaces for Smelting Iron written by Henry Windsor Nichols and published by . This book was released on 1922 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smelting Iron Ore with Anthracite written by R. C. Buehl and published by . This book was released on 1955 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book Blast Furnace Ironmaking written by J. E. Holditch and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Phenomena and Modelling written by The Iron and Steel Institute of Japan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: As ironmakers are well aware, it was only a few decades ago that the blast furnace was viewed as a strange 'black box'. Recently, however, various in-furnace phenomena have become the subject of serious scientific study, largely as the result of the 'dissection' of dead furnaces, together with the development of advanced monitoring and control techniques. In this way, a new frontier has been opened within the venerable domain of metallurgy. In the light of these new developments, the Committee on Reaction within Blast Furnaces was set up in March 1977 by the Joint Society ofIron and Steel Basic Research - a cooperative research organization of the Iron and Steel Institute of Japan (ISIJ), the Japan Institute of Metals (JIM) and the Japan Society for the Promotion of Science (JSPS). Consisting of twenty-six members and advisors drawn from the fields of academia and industry, this committee collected, discussed, and evaluated numerous papers during its five year commission. Particular attention was paid to the interpretation of findings drawn from the autopsy of dead furnaces, in the context of the live furnace state, and the correlation of data regarding cohesive zone configuration, level, and furnace performance. The results of this intense research activity are presented here in the hope that they will serve not only as a source of enrichment to the professional knowledge of researchers and operators, but also as textual material for graduate students in the field of metallurgy.
Download or read book Alternate Methods of Ironmaking written by Sujay Kumar Dutta | Rameshwar Sah and published by S. Chand Publishing. This book was released on with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been prepared primarily for use by Students studying Ferrous Metallurgy (i.e., Iron and Steelmaking) at UG and PG level of Metallurgical and Materials Engineering, Research workers engaged in obtaining fundamental information in this field, and for Process Metallurgists to understand the processes in general and Sponge Iron Producers in particular. ; It also helps the practicing engineers who wish to apply the theoretical knowledge to the process they are operating. ;The book may very well be introduced as a Textbook for Elective subject in Third/Fourth year of UG programme in Metallurgical & Materials Engineering. ;The book consists of nine chapters in two parts; five chapters in Part-I: Direct Reduction Processes and four chapters in Part-II: Smelting Reduction Processes. In Part-I, the Chapter 1 deals with a brief introduction of the sponge iron and classification of the direct reduction processes with their advantages and limitations. Chapter 2 deals with the raw materials involved in direct reduced ironmaking and their characteristics. In Chapter 3, the physico-chemical principles and thermodynamics of reduction are highlighted. The details of different direct reduction (DR) processes are discussed in Chapter 4. The characteristics and uses of DRI as well as its effect on Electric Arc Furnace performance is discussed in Chapter 5.
Download or read book IRON MAKING AND STEELMAKING written by AHINDRA GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2008-02-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative account covers the entire spectrum from iron ore to finished steel. It begins by tracing the history of iron and steel production, right from the earlier days to today’s world of oxygen steelmaking, electric steelmaking, secondary steelmaking and continuous casting. The physicochemical fundamental concepts of chemical equilibrium, activity-composition relationships, and structure-properties of molten metals are introduced before going into details of transport phenomena, i.e. kinetics, mixing and mass transfer in ironmaking and steelmaking pro-cesses. Particular emphasis is laid on the understanding of the fundamental principles of the processes and their application to the optimisation of actual processes. Modern developments in blast furnaces, including modelling and process control are discussed along with an introduction to the alternative methods of ironmaking. In the area of steelmaking, BOF plant practice including pre-treatment of hot metal, metallurgical features of oxygen steelmaking processes, and their control form part of the book. It also covers basic open hearth, electric arc furnace and stainless steelmaking, before discussing the area of casting of liquid steel—ingot casting, continuous casting and near net shape casting. The book concludes with a chapter on the status of the ironmaking and steelmaking in India. In line with the application of theoretical principles, several worked-out examples dealing with fundamental principles as applied to actual plant situations are presented. The book is primarily intended for undergraduate and postgraduate students of metallurgical engineering. It would also be immensely useful to researchers in the area of iron and steel.
Download or read book Principles of Blast Furnace Ironmaking written by Anil Kumar Biswas and published by . This book was released on 1981 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
