Download or read book Models for Economic Evaluation of Flexible Manufacturing Systems written by Daniel Pablo Salomon and published by . This book was released on 1983 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Simulation And Control Of Flexible Manufacturing Systems A Petri Net Approach written by Kurapati Venkatesh and published by World Scientific. This book was released on 1999-01-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Flexible Manufacturing Systems Recent Developments written by A. Raouf and published by Elsevier. This book was released on 1995-02-09 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) involve substituting machines capable of performing a wide and redefinable variety of tasks for machines dedicated to the performance of specific tasks. FMS can also be programmed to handle new products, thus extending the machines' life cycles. Thus they represent a change from "standardized goods produced by customized machines" to "customized goods produced by standardized machines". This volume contains new and updated material in this field, and will be of great interest to researchers, managers and students concerned with problems related to flexible manufacturing systems.

Download or read book Economics of Advanced Manufacturing Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1980s have witnessed a tremendous growth in the field of computer integrated manufacturing systems. The other major areas of development have been computer-aided design, computer-aided manufacturing, industrial robotics, automated assembly, cellular and modular material handling, computer networking and office automation to name just a few. These new technologies are generally capital intensive and do not conform to traditional cost structures. The net result is a tremendous change in the way costs should be estimated and economic analyses performed. The majority of existing engineering economy texts still profess application of traditional analysis methods. But, as was men tioned above, it is clear that the basic trend in manufacturing industries is itself changing. So it is quite obvious that the practice of traditional economic analysis methods should change too. This book is an attempt to address the various issues associated with non-traditional methods for evaluation of advanced computer-integrated technologies. This volume consists of twenty refereed articles which are grouped into five parts. Part one, Economic Justification Methods, consists of six articles. In the first paper, Soni et at. present a new classification for economic justification methods for advanced automated manufacturing systems. In the second, Henghold and LeClair look at strengths and weaknesses of expert systems in general and more specifically, an ap plication aimed at investment justification in advanced technology. The third paper, by Carrasco and Lee, proposes an enhanced economic methodology to improve the needs analysis, conceptual design and de tailed design activities associated with technology modernization.

Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by John Wiley & Sons. This book was released on 1993-10-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.

Download or read book Optimal Design of Flexible Manufacturing Systems written by Ulrich A.W. Tetzlaff and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible manufacturing systems are complex production systems with considerable high investment costs. This book intends to show the reader how the design of such a system can be optimized. Thereby it addresses the academic world in management science and industrial engineering as well as system planners in industry. First the design problems are analysed in detail and a planning concept is presented. Afterwards possible tools for the design process are described, as there are: mathematical programming, queueing networks, computer simulation, perturbation analysis, petri nets, group technology, and knowledge based systems. The major part of the book, however, concerns the description of existing optimization models based on mathematical programming. Each model is explained and discussed in detail and for new models, developed by the author, numerical examples are given. Finally some distinct guidelines are presented which help the system planners to select the appropriate model for their planning problems.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Economic Evaluation of Advance Technologies written by Jerome P. Lavelle and published by CRC Press. This book was released on 2001-12-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text illuminates the contemporary issues and technologies related to the economic evaluation and justification of advanced technologies. Included are modern tools, as well as application-based cases that demonstrate the use of these tools. Students, researchers and decision makers will benefit from this useful resource.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Control and Dynamic Systems V48 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 48: Manufacturing and Automation Systems: Techniques and Technologies, Part 4 of 5 deals with techniques and technologies in manufacturing and automation systems. This book begins by discussing the advances of techniques for measuring the effectiveness of investments in automation and manufacturing systems. It then turns to graphical concurrent modeling language (GCML), a program used to model and analyze discrete manufacturing systems. This book also presents techniques for modeling solids; strategies for design optimization of machine products; design and control of industrial robots; and other optimization methodologies for manufacturing, robotic, and automation systems. This book will provide a uniquely significant reference for those who are interested in manufacturing, robotics, and automation systems.

Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.

Download or read book Economic and Financial Justification of Advanced Manufacturing Technologies written by Hamid R. Parsaei and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competence in investment analysis is now a basic requirement for most practicing managers, engineers, and financial analysts in order to avoid possible serious mistakes arising from flawed or inadequate knowledge of the discipline. Furthermore, individuals who make decisions based on technical economics stake their professional futures, in many cases, on the accuracy of such evaluations. The aim of this volume is to provide a balanced view of the essential components of economic and financial analysis including: 1. Strategic and design issues; 2. Principles of cost management systems and activity-based costing, and; 3. Tools for developing the financial measures of investment worth, with advanced topics and case studies in these three areas.This volume provides a refreshing insight into the various methods that engineers, managers, and financial analysts may need to consider to find good alternatives for the investment of scarce resources. Not only are new ventures presented, but also improvements within existing facilities that include process modification, product design, equipment replacement, and plant expansion/contraction.

Download or read book Studies on Industrial Productivity written by Various Authors and published by Routledge. This book was released on 2018-07-31 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published between 1994 and 2000 the volumes in this set discuss: the successful implementation of radical, technological innovations within business organizations. issues of Chinese rural-rural and rural-urban migration a number of subjects of significance for labor and economic policy, especially the role of U. S. tax policy in the relocation of jobs from the contintental USA to Puerto Rico. the impact an immigrant community in the USA has on the type and quantity of foreign goods available. the relation between technology and the exercise of sea power. problems related to investment planning, capacity additions, and choice of technology in dynamic manufacturing systems.

Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1985 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt: