Download or read book Modelling Simulation and Control of Two Wheeled Vehicles Enhanced Edition written by Mara Tanelli and published by John Wiley & Sons. This book was released on 2014-04-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced e-book includes videos Many books have been written on modelling, simulation and control of four-wheeled vehicles (cars, in particular). However, due to the very specific and different dynamics of two-wheeled vehicles, it is very difficult to reuse previous knowledge gained on cars for two-wheeled vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles presents all of the unique features of two-wheeled vehicles, comprehensively covering the main methods, tools and approaches to address the modelling, simulation and control design issues. With contributions from leading researchers, this book also offers a perspective on the future trends in the field, outlining the challenges and the industrial and academic development scenarios. Extensive reference to real-world problems and experimental tests is also included throughout. Key features: The first book to cover all aspects of two-wheeled vehicle dynamics and control Collates cutting-edge research from leading international researchers in the field Covers motorcycle control – a subject gaining more and more attention both from an academic and an industrial viewpoint Covers modelling, simulation and control, areas that are integrated in two-wheeled vehicles, and therefore must be considered together in order to gain an insight into this very specific field of research Presents analysis of experimental data and reports on the results obtained on instrumented vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles is a comprehensive reference for those in academia who are interested in the state of the art of two-wheeled vehicles, and is also a useful source of information for industrial practitioners.
Download or read book Modelling Simulation and Control of Two Wheeled Vehicles written by Mara Tanelli and published by John Wiley & Sons. This book was released on 2014-02-04 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced e-book includes videos Many books have been written on modelling, simulation and control of four-wheeled vehicles (cars, in particular). However, due to the very specific and different dynamics of two-wheeled vehicles, it is very difficult to reuse previous knowledge gained on cars for two-wheeled vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles presents all of the unique features of two-wheeled vehicles, comprehensively covering the main methods, tools and approaches to address the modelling, simulation and control design issues. With contributions from leading researchers, this book also offers a perspective on the future trends in the field, outlining the challenges and the industrial and academic development scenarios. Extensive reference to real-world problems and experimental tests is also included throughout. Key features: The first book to cover all aspects of two-wheeled vehicle dynamics and control Collates cutting-edge research from leading international researchers in the field Covers motorcycle control – a subject gaining more and more attention both from an academic and an industrial viewpoint Covers modelling, simulation and control, areas that are integrated in two-wheeled vehicles, and therefore must be considered together in order to gain an insight into this very specific field of research Presents analysis of experimental data and reports on the results obtained on instrumented vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles is a comprehensive reference for those in academia who are interested in the state of the art of two-wheeled vehicles, and is also a useful source of information for industrial practitioners.
Download or read book Modelling and Control of an Autonomous Two Wheeled Vehicle written by Alen Turnwald and published by Logos Verlag Berlin GmbH. This book was released on 2020-11-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: With respect to the future urban mobility, modern electrical bicycles, advanced motorcycles and innovative two-wheeled vehicles are arresting enormous amount of attention. Especially, model-based control and optimal trajectory planning for such vehicles are important to the research and development of the future. Therefore, a reliable and yet usable vehicle model as well as a systematic approach to motion control for two-wheeled vehicles are essential, to which this work makes a contribution. Currently available two-wheeled vehicle models are mostly either too complex to be used for a systematic control synthesis, or too simple such that the physical behaviour of the vehicle is no more represented. In this thesis, a unifying approach to modelling and control for autonomous two-wheeled vehicles is presented. The resulting model is generally valid and physically detailed enough to represent the characteristic dynamical behaviour such as the self-stability. At the same time, it is suited to a systematic control synthesis. Furthermore, the systematic extenddability, for instance by a rider, is demonstrated. The model is validated by simulations and by comparison to well-known models from the literature. The proposed vehicle model is derived in the Lagrangian and Hamiltonian framework and used for model-based optimal trajectory planning. Furthermore, a passivity-based trajectory tracking controller is designed based on the resulting port-Hamiltonian system using the so-called generalised canonical transformations. Such a controller is physically interpretable and robust against parameter uncertainties. To this end, existing approaches of passivity-based controller design are extended and adjusted for two-wheeled vehicles. Finally, a prototype two-wheeled vehicle is introduced which is used for experimental validation of the model and to demonstrate motion control algorithms for autonomous two-wheeled vehicles.
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control written by Bo Huang and published by Springer. This book was released on 2016-07-15 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as intelligent micro-grids, new energy vehicles, and the Internet of Things.
Download or read book Mobile Robotics Solutions And Challenges Proceedings Of The Twelfth International Conference On Climbing And Walking Robots And The Support Technologies For Mobile Machines written by Mohammad Osman Tokhi and published by World Scientific. This book was released on 2009-08-26 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2008 conference. Robots are no longer confined to industrial manufacturing environments with a great deal of interest being invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for the dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics in meeting the needs of mankind in various sectors of the society. These include personal care, public health, and services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics specifically in mobile robotics, and their experience is reflected in the careful editing of the contents in the book.
Download or read book Simulation and Control of Two wheeled Vehicles in a Virtual Reality Environment written by Jyh Jian Ong and published by . This book was released on 2001 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Trends in Mobile Robotics written by Hideo Fujimoto and published by World Scientific. This book was released on 2010 with total page 1387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2010 conference. Robots are no longer confined to industrial manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, and services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.
Download or read book Emerging Trends In Mobile Robotics Proceedings Of The 13th International Conference On Climbing And Walking Robots And The Support Technologies For Mobile Machines written by Hiromi Mochiyama and published by World Scientific. This book was released on 2010-08-23 with total page 1387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2010 conference. Robots are no longer confined to industrial manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, and services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.
Download or read book Design and Modeling of Mechanical Systems IV written by Nizar Aifaoui and published by Springer Nature. This book was released on 2020-02-26 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Download or read book The Computer Assisted Modelling Simulation and Analysis of Two wheeled Road Vehicles written by Mahbub Rahman Gani and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Systems Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2018-06-04 with total page 2351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing advancements in modern technology have led to significant developments in intelligent systems. With the numerous applications available, it becomes imperative to conduct research and make further progress in this field. Intelligent Systems: Concepts, Methodologies, Tools, and Applications contains a compendium of the latest academic material on the latest breakthroughs and recent progress in intelligent systems. Including innovative studies on information retrieval, artificial intelligence, and software engineering, this multi-volume book is an ideal source for researchers, professionals, academics, upper-level students, and practitioners interested in emerging perspectives in the field of intelligent systems.
Download or read book Adaptive Mobile Robotics written by Abul K. M. Azad and published by World Scientific. This book was released on 2012 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial and manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.
Download or read book Adaptive Mobile Robotics Proceedings Of The 15th International Conference On Climbing And Walking Robots And The Support Technologies For Mobile Machines written by Mohammad Osman Tokhi and published by World Scientific. This book was released on 2012-07-11 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.
Download or read book The Dynamics of Vehicles on Roads and Tracks written by Martin Rosenberger and published by CRC Press. This book was released on 2016-03-30 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IAVSD Symposium is the leading international conference in the field of ground vehicle dynamics, bringing together scientists and engineers from academia and industry. The biennial IAVSD symposia have been held in internationally renowned locations. In 2015 the 24th Symposium of the International Association for Vehicle System Dynamics (IAVSD)
Download or read book Motorcycle Dynamics written by Vittore Cossalter and published by Lulu.com. This book was released on 2006 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the theory of motorcycle dynamics. It is a technical book for the engineer, student, or technically/mathematically inclined motorcycle enthusiast. Motorcycle Dynamics offers a wealth of information compiled from the most up-to-date research into the behavior and performance of motorcycles. The structure of the book and abundant graphs assist in understanding an exceptionally complicated subject. The book presents a large number of graphs and figures that make the understanding easy.
Download or read book Vehicle Dynamics written by Dieter Schramm and published by Springer. This book was released on 2017-07-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors examine in detail the fundamentals and mathematical descriptions of the dynamics of automobiles. In this context, different levels of complexity are presented, starting with basic single-track models up to complex three-dimensional multi-body models. A particular focus is on the process of establishing mathematical models based on real cars and the validation of simulation results. The methods presented are explained in detail by means of selected application scenarios. In addition to some corrections, further application examples for standard driving maneuvers have been added for the present second edition. To take account of the increased use of driving simulators, both in research, and in industrial applications, a new section on the conception, implementation and application of driving simulators has been added.
