Download or read book Modelling of Thermo mechanical Fatigue Behavior in Superalloys written by Yavuz Kadioglu and published by . This book was released on 1992 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-mechanical fatigue (TMF) and isothermal fatigue (IF) behavior of coated and uncoated Mar-M247 and, uncoated Mar-M246 was studied. The Mar-M247 was coated with Alpak-S1. The coating consists of a manganese and Aluminium powder slurry that is applied by painting, dipping, or spraying with an air brush. Thermo-mechanical experiments for coated Mar-M247 were conducted under T$sb{rm min}$ = 500$spcirc$C and T$sb{rm max}$ = 871$spcirc$C conditions. Both out-of-phase and in-phase strain-temperature phasing conditions were considered. Isothermal experiments were conducted at 500$spcirc$C and 871$spcirc$C. Comparison with the uncoated Mar-M247 showed that fatigue lives of coated material could be lower than the uncoated material and the difference was as much as four folds in some cases. For uncoated Mar-M247, only thermo-mechanical out-of-phase experiments were conducted. The temperature limit considered was T$sb{rm min}$ = 500$spcirc$C and T$sb{rm max}$ = 1038$spcirc$C. SEM, Microprobe and Auger spectroscopy were used to gain insight into oxidation effects at high temperature. An experimental program for Mar-M246 was also carried out. Due to the coarse grained structure, the stress-strain response indicates variation from specimen to specimen in some cases. The effect of this variation on life does not appear significant, except at smaller strain ranges. A numerical method is also developed to estimate the stress field due to a surface inhomogeneity in an elastic half space. The technique is based on Eshelby's equivalent inclusion method. The results were used in developing a life prediction methodology for the coated superalloys.
Download or read book Thermo mechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 2000 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 1993 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical fatigue behavior of materials written by Michael J. Verrilli and published by ASTM International. This book was released on 1996 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Fatigue Behavior of Materials written by Michael A. McGaw and published by ASTM International. This book was released on 2003 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: "ASTM Stock Number: STP1428. - "Fourth Symposium on Thermomechanical Fatigue Behavior of Materials, held in Dallas, Texas on November 7-8, 2001. The Symposium was sponsored by ASTM Committee E08 on Fatigue and Fracture and its Subcommittee E08.05 on Cyclic Deformation and Fat. - Includes bibliographical references and indexes. ASTM International; 2011.
Download or read book Thermomechanical Fatigue Behavior of a Superalloy written by JL. Malpertu and published by . This book was released on 1988 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermal-mechanical fatigue test facility is described to study the stress-strain behavior and fatigue damage under anisothermal conditions of materials for gas turbine blading applications. Hollow specimens are heated by a radiation furnace; a microcomputer is used to generate simultaneous strain and temperature signals and tests are conducted under closed-loop control of axial strain. A typical mechanical strain-temperature loop has been used from 600 to 1050°C (873 to 1323 K) with peak strains at intermediate temperatures. Application to IN 100, a nickel base superalloy, is reported. Crack initiation and early crack growth are shown which are deduced from a plastic replication technique. The role of oxidation has been emphasized and the life of thermal mechanical fatigue specimens was found to be in good agreement with low-cycle fatigue results at 1000°C (1273 K).
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.
Download or read book The Mechanics of Constitutive Modeling written by Niels Saabye Ottosen and published by Elsevier. This book was released on 2005-09-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive modelling is the mathematical description of how materials respond to various loadings. This is the most intensely researched field within solid mechanics because of its complexity and the importance of accurate constitutive models for practical engineering problems. Topics covered include: Elasticity - Plasticity theory - Creep theory - The nonlinear finite element method - Solution of nonlinear equilibrium equations - Integration of elastoplastic constitutive equations - The thermodynamic framework for constitutive modelling – Thermoplasticity - Uniqueness and discontinuous bifurcations • More comprehensive in scope than competitive titles, with detailed discussion of thermodynamics and numerical methods. • Offers appropriate strategies for numerical solution, illustrated by discussion of specific models. • Demonstrates each topic in a complete and self-contained framework, with extensive referencing.
Download or read book Thermal mechanical Fatigue Behavior of Nickel base Superalloys written by Norman J. Marchand and published by . This book was released on 19?? with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the main achievements of a 36-month research program the main objective of which was to gain more insight into the problem of crack growth under thermal mechanical fatigue (TMF) conditions. The program was arranged into five technical tasks. Under Task I, the goal was to identify the crack propagation conditions in aircraft engines (hot section) and to assess the validity of conventional fracture mechanics parameters to address TMF crack growth. The second task defined the test facilities, test specimen and the testing conditions needed to establish the effectiveness of data correlation parameters identified in Task I. Under Task III, a computerized testing system to measure the TMF behavior (LCF and CG behaviors) of various alloy systems was built. A crack propagation test program was defined and conducted under Task IV. The test variables included strain range, strain rate (frequency) and temperature. Task V correlated and generalized the Task IV data for isothermal and variable temperature conditions so that several crack propagation parameters could be compared and evaluated.
Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.
Download or read book Thermo Mechanical Fatigue Life Prediction Methods written by H. Sehitoglu and published by . This book was released on 1992 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synergistic effects of oxidation on high temperature isothermal and thermo-mechanical fatigue behavior are studied. Experiments were conducted under different strain-temperature variations and atmospheres to reveal the varying severities of oxide induced failure. Conditions conducive to intergranular creep damage under thermo-mechanical fatigue are identified, and the competing damage mechanisms are classified for steels, Ni-based superalloys, and Al alloys. Requirements and a solution procedure are outlined for a thermo-mechanical fatigue life prediction model which is then applied to 1070 steel, MarM-247 nickel-based superalloy, and A12xxx-T4 aluminum alloy.
Download or read book Modelling of Thermo mechanical Fatigue Behavior in Superallys written by Yavuz Kadioglu and published by . This book was released on 1992 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Towards the Development of a Physics Based Thermo Mechanical Fatigue Life Prediction Model for a Single Crystalline Ni Base Superalloy written by Robert Amaro and published by . This book was released on 2014 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: A long term effort has been underway to develop a mechanism-based model for life prediction under thermo-mechanical fatigue (TMF) cycling. A model has been developed which is based upon the impingement of slip bands upon oxidized regions and subsequent initiation of a crack due to stress concentration. The concept of an effective cycle temperature, Teff, and the dynamic nature of the material are critical components of the model and result in the ability to produce very accurate life predictions. It has also been shown that the model is capable of addressing complexities such as imposed high cycle fatigue (HCF) while still producing excellent agreement with the experiment. However, given the fact that this material is used for jet engine turbine blades and that such blades have cooling holes which act as notches, the next step in the development of this model is to incorporate it into a notched environment. The principal features of the TMF model are reviewed and a strategy for full integration into notched fatigue life prediction is discussed. Recent experimental results are presented which are based upon simulating smooth bar conditions at the notch root and a first approach to numerical simulation (called Q fit) is presented. Suggestions for further research are discussed.
Download or read book Thermomechanical Fatigue Behavior of Materials written by and published by . This book was released on 2003 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Fatigue of Materials and Components written by David A. Spera and published by ASTM International. This book was released on 1976 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:
