Download or read book The Modelling of Microstructure and its Potential for Studying Transport Properties and Durability written by H. Jennings and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: From July 10th through July 13th, 1994, an informal workshop co-organized by RILEM committees 116-PCD and 123-MME was held at Saint-Remy-Ies Chevreuse, France, and attended by 38 delegates from 16 countries. Twenty-nine papers were presented, converging the general subjects of modelling micro structures and predicting durability of concrete and other cement-based materials. A short summary follows: G. M. Idom's paper entitled "Modelling Research for Concrete Engineering" serves as an introduction to the workshop, presenting an overview of modelling research with the conelusion that the broad practica1 objective is to produce high-quality concrete. This means that many characteristics, ranging from rheology to alkali-silica reaction, must be modelled. In other words, the system must be understood. Idom's paper sets the stage for papers in two general areas: 1) models and 2) transport properties. After this, abrief survey of the develop ment of microstructurally-based models is presented. A elose relationship between computer power and speed is suggested. The first group of papers on models covers the subjects of scale and resolution. Most models define and predict characteristics of the pore system, which range in scale from nanometer to millimeter. Various types ofnetworks are proposed in these papers. A good microstructural model must describe the pores and other phases at ascale appropriate to the properties that the model predicts. Also, a good model should be based on fundamental knowledge. In the case of cement-based materials, the important properties may depend on the microstructure, especially the porosity, at several scales.

Download or read book Engineering and Transport Properties of the Interfacial Transition Zone in Cementitious Composites written by International Union of Testing and Research Laboratories for Materials and Structures and published by RILEM Publications. This book was released on 1999 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interfacial Transition Zone in Concrete written by J.C. Maso and published by CRC Press. This book was released on 2004-03-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important new state-of-the-art report prepared by RILEM Technical Committee 108 ICC. It has been written by a team of leading international experts from the UK, USA, Canada, Israel, Germany, Denmark, South Africa, Italy and France. Research studies over recent years in the field of cement science have focused on the behaviour of the interfaces between the components of cement-based materials. The techniques used in other areas of materials science are being applied to the complex materials found in cements and concretes, and this book provides a significant survey of the present state of the art.

Download or read book Concrete Microstructure written by D. M. Roy and published by Strategic Highway Research Program (Shrp). This book was released on 1993 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability of concrete in highway systems is a problem of national concern. In order to better understand the mechanisms which intrinsically control durability in highway concrete, it is necessary to define and understand those factors which impact concrete microstructure which is a consequence of both its formulation and the processes taking place during mixing, placing and curing. This report documents an investigation of those variables which control cement hydration and consequent microstructural development.

Download or read book Proceedings of the 4th Congr s International de G otechnique Ouvrages Structures written by Hoang-Hung Tran-Nguyen and published by Springer. This book was released on 2017-10-20 with total page 1181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume for the 4th international conference CIGOS 2017 (Congrès International de Géotechnique - Ouvrages - Structures) presents novel technologies, solutions and research advances, making it an excellent guide in civil engineering for researchers, students, and professional engineers alike. Since 2010, CIGOS has become a vital forum for international scientific exchange on civil engineering. It aims to promote beneficial economic partnerships and technology exchanges between enterprises, worldwide institutions and universities. Following the success of the last three CIGOS conferences (2010, 2013 and 2015), the 4th conference was held at Ho Chi Minh City University of Technology, Ho Chi Minh City (Saigon), Vietnam on 26 to 27 October 2017. The main scientific themes of CIGOS 2017 were focused on ‘New Challenges in Civil Engineering’.

Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.

Download or read book Handbook of Analytical Techniques in Concrete Science and Technology written by V.S. Ramachandran and published by Elsevier. This book was released on 2000-11-01 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measuring the long-term durability of new types of concrete and concrete technologies is crucial to their acceptance in the marketplace. This long-needed handbook of analytical techniques provides a complete reference to the cutting-edge procedures used to test today's innovative materials. Ranging from chemical and thermal analysis, to IR and Nuclear Magnetic Resonance spectroscopy, to Scanning Electron Microscopy, x-ray diffraction, computer modeling and more, the book provides first-hand explanations of modern methodsùcontributed by 24 leading scientists, many of whom actually developed or refined the techniques. The book includes many analytic techniques, applied to a wide range of organic, inorganic and composite materials and additives.Perfect for practitioners, students, and professional standards writers, the handbook is highly useful for scrutinizing materials in a variety of environments. It takes into account the many factors that affect the qualities of concreteùtemperature, pore and pore-size distribution, surface area, and exposureùgathering diverse evaluation methods into one convenient resource.

Download or read book Multi Scale Modeling and Characterization of Infrastructure Materials written by Niki Kringos and published by Springer Science & Business Media. This book was released on 2013-05-26 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance. The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustainable infrastructure materials. Researchers, practitioners, undergraduates and graduate students engaged in infrastructure materials or multi-scale characterization and modeling efforts can use this book as a comprehensive reference, to learn about the currently ongoing research efforts in this field or as an inspiration for new research ideas to enhance the long-term performance of infrastructure materials from a fundamental perspective. The Symposium was held under the auspices of the RILEM Technical Committee on Nanotechnology-Based Bituminous Materials 231-NBM and the Transport Research Board (TRB) Technical Committee on Characteristics of Asphalt Materials AFK20.

Download or read book Interfacial Transition Zone in Cementitious Composites written by A. Katz and published by CRC Press. This book was released on 2019-12-12 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need to resolve the ITZ's influence on engineering and durability characteristics of cementious composites, identifies the systems and properties that are affected by it, and quantifies these effects in order to prepare the base for engineering design tools. This volume presents the proceedings of the Second International RILEM conference on the Interfacial Transition Zone in cementious composites, held in Haifa, Israel in 1998.

Download or read book NIST Building Fire Research Laboratory Publications written by and published by . This book was released on 1995 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Nanoconcretes and Cement Based Materials written by Mohd Shahir Liew and published by Elsevier. This book was released on 2019-11-16 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Nanoconcretes and Cement-Based Materials: Properties, Modelling and Applications explores the fundamental concepts and applications of smart nanoconcretes with self-healing, self-cleaning, photocatalytic, antibacterial, piezoelectrical, heating and conducting properties and how they are used in modern high-rise buildings, hydraulic engineering, highways, tunnels and bridges. This book is an important reference source for materials scientists and civil engineers who are looking to enhance the properties of smart nanomaterials to create stronger, more durable concrete. Explores the mechanisms through which active agents are released from nanocontainers inside concrete Shows how embedded smart nanosensors, including carbon cement-based smart sensors and micro/nano strain-sensors, are used to increase concrete performance Discusses the major challenges of integrating smart nanomaterials into concrete composites

Download or read book Annual Reviews Of Computational Physics Vii written by Dietrich Stauffer and published by World Scientific. This book was released on 2000-01-24 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh volume of this invaluable series focuses an applications — from Ising models to the formation of small clusters and phase ordering in fluids, to the structure of concrete, to the growth of cities built from it, to the traffic jams and the biology of life in the cities, and to the marketing of products to consumers. Thus the interdisciplinary research potential of computational physics is particularly well documented.

Download or read book PRO 19 2nd International RILEM Workshop on Testing and Modelling the Chloride Ingress into Concrete written by Carmen Andrade and published by RILEM Publications. This book was released on 2001 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interfacial Transition Zone in Cementitious Composites written by A. Katz and published by CRC Press. This book was released on 2004-03-01 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need to resolve the ITZ's influence on engineering and durability characteristics of cementious composites, identifies the systems and properties that are affected by it, and quantifies these effects in order to prepare the base for engineering design tools. This volume presents the proceedings of the Second International RI

Download or read book Proceedings of the Second Workshop of the HORIZON 2020 CEBAMA Project KIT Scientific Reports 7752 written by Altmaier, M. and published by KIT Scientific Publishing. This book was released on 2019-03-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resistance of Concrete to Chloride Ingress written by Luping Tang and published by CRC Press. This book was released on 2011-10-06 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chloride ingress in reinforced concrete induces corrosion and consequent spilling and structural weakness, and it occurs world-wide and imposes an enormous cost. Yet it can be resisted by using test methods and relevant models for service life prediction.Resistance of Concrete to Chloride Ingress sets out current understanding of chloride transport

Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.