Download or read book Modelling and Simulation of Spatial Robotic Manipulators with Flexible Links and Joint Drives for Control Strategies Implementation and Evaluation written by Mohammad H. Fathall Dado and published by . This book was released on 19?? with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators. Sample Chapter(s). Chapter 1: Flexible-link Manipulators: Modeling, Nonlinear Control and Observer (235 KB). Contents: Flexible-Link Manipulators: Modeling, Nonlinear Control and Observer (M A Arteaga & B Siciliano); Energy-Based Control of Flexible Link Robots (S S Ge); Trajectory Planning and Compliant Control for Two Manipulators to Deform Flexible Materials (O Al-Jarrah et al.); Force Control of Flexible Manipulators (F Matsuno); Experimental Study on the Control of Flexible Link Robots (D Wang); Sensor Output Feedback Control of Flexible Robot Arms (Z-H Luo); On GA Based Robust Control of Flexible Manipulators (Z-Q Xiao & L-L Cui); Analysis of Poles and Zeros for Tapered Link Designs (D L Girvin & W J Book); Optimum Shape Design of Flexible Manipulators with Tip Loads (J L Russell & Y-Q Gao); Mechatronic Design of Flexible Manipulators (P-X Zhou & Z-Q Xiao); A Comprehensive Study of Dynamic Behaviors of Flexible Robotic Links: Modeling and Analysis (Y-Q Gao & F-Y Wang). Readership: Researchers, lecturers and graduate students in robotics & automated systems, electrical & electronic engineering, and industrial engineering

Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.

Download or read book Robot Manipulators written by Etienne Dombre and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.

Download or read book Robot Manipulators written by Agustin Jimenez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in robot manipulators. It offers a complete survey to the kinematic and dynamic modelling, simulation, computer vision, software engineering, optimization and design of control algorithms applied for robotic systems. It is devoted for a large scale of applications, such as manufacturing, manipulation, medicine and automation. Several control methods are included such as optimal, adaptive, robust, force, fuzzy and neural network control strategies. The trajectory planning is discussed in details for point-to-point and path motions control. The results in obtained in this book are expected to be of great interest for researchers, engineers, scientists and students, in engineering studies and industrial sectors related to robot modelling, design, control, and application. The book also details theoretical, mathematical and practical requirements for mathematicians and control engineers. It surveys recent techniques in modelling, computer simulation and implementation of advanced and intelligent controllers.

Download or read book Flexible Manipulators written by Yanqing Gao and published by Academic Press. This book was released on 2012-04-16 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series comprises titles that present state-of-the-art knowledge and the latest advances in intelligent systems. Its scope includes theoretical studies, design methods, and real-world implementations and applications. Flexible manipulators play a critical role in applications in a diverse range of fields, such as construction automation, environmental applications, and space engineering. Due to the complexity of the link deformation and dynamics, the research effort on accurate modeling and high performance control of flexible manipulators has increased dramatically in recent years. This book presents analysis, data and insights that will of particular use for researchers and engineers working on the optimization and control of robotic manipulators and automation systems. - Government and industry groups have specifically stressed the importance of innovation in robotics, manufacturing automation, and control systems for maintaining innovation and high-value-added manufacturing - Discusses the latest research on the quantitative effects of size, shape, mass distribution, tip load, on the dynamics and operational performance of flexible manipulators - Presents unique analyses critical to the effective modeling and optimization of manipulators: hard to find data unavailable elsewhere

Download or read book Modeling and Robust Control of Two Collaborative Robot Manipulators Handling a Flexibile Object written by Balasubramanian Esakki and published by . This book was released on 2011 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robots are often used in industry to handle flexible objects, such as frames, beams, thin plates, rubber tubes, leather goods and composite materials. Moving long flexible objects in a desired path and also precise positioning and orienting the objects need a collaborative action between two robot arms. Most of the earlier studies have dealt with manipulation of rigid objects and only a few have focused on the collaborative manipulators handling flexible objects. Such studies on handling of flexible objects generally used finite element method or assumed mode method for deriving the dynamic model of the flexible objects. These approximation methods require more number of sensors to feedback the vibration measurements or require an observer. Unlike in the earlier studies, this thesis concerns with development of a dynamic model of the flexible object in partial differential equation (PDE) form and design of a robust control strategy for collaborative manipulation of the flexible objects by two rigid robot arms. Two planar rigid manipulators each with three links and revolute joints handling a flexible object is considered during the model development. Kinematic and dynamic equations of the flexible object are derived without using any approximation techniques. The resulting dynamic equation of the flexible object together with the manipulator dynamic equations form the combined dynamic model of the system. The developed complete system of dynamic equations is described by the PDE's having rigid as well as flexible parameters coupled together. Such a coupled system must be controlled without using any form of approximation techniques and this is accomplished using the singular perturbation approach. By utilizing this technique, slow and fast subsystems are identified in two different time scales and controller is designed for each subsystem. The key issue in developing a control algorithm is that, it should be robust against uncertain parameters of the manipulators and the flexible object and it should also achieve the exponential convergence. Hence, for the slow subsystem, sliding mode control algorithm is developed and for the fast subsystem, a simple feedback control algorithm is designed. In general, usage of singular perturbation technique necessitates exponential stability of the slow and fast subsystems, which is evaluated by satisfying the Tikhnov's theorem. Hence, the exponential stability analysis for both the subsystems is performed. Simulation results are presented to validate the composite control scheme. As a further consideration in the improvement of control law for the slow subsystem, two modified control algorithms are suggested. The first one focused on the avoidance of velocity signal measurement which is useful to eliminate the need of velocity sensors and the second controller aims at avoiding the complex regressor in the control law. The capability of those controllers is illustrated through simulation studies. The extension of earlier analysis has been carried out by developing the complete system of dynamic equations in joint space.

Download or read book Space Station Systems written by and published by . This book was released on 1986 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Robot Manipulators in Joint Space written by Rafael Kelly and published by Springer Science & Business Media. This book was released on 2007-12-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tutors can design entry-level courses in robotics with a strong orientation to the fundamental discipline of manipulator control pdf solutions manual Overheads will save a great deal of time with class preparation and will give students a low-effort basis for more detailed class notes Courses for senior undergraduates can be designed around Parts I – III; these can be augmented for masters courses using Part IV

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1995 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fractional Modeling and Controller Design of Robotic Manipulators written by Abhaya Pal Singh and published by Springer Nature. This book was released on 2020-10-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book at hand is an appropriate addition to the field of fractional calculus applied to control systems. If an engineer or a researcher wishes to delve into fractional-order systems, then this book has many collections of such systems to work upon, and this book also tells the reader about how one can convert an integer-order system into an appropriate fractional-order one through an efficient and simple algorithm. If the reader further wants to explore the controller design for the fractional-order systems, then for them, this book provides a variety of controller design strategies. The use of fractional-order derivatives and integrals in control theory leads to better results than integer-order approaches and hence provides solid motivation for further development of control theory. Fractional-order models are more useful than the integer-order models when accuracy is of paramount importance. Real-time experimental validation of controller design strategies for the fractional-order plants is available. This book is beneficial to the academic institutes for postgraduate and advanced research-level that need a specific textbook on fractional control and its applications in srobotic manipulators. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.

Download or read book Vehicle Manipulator Systems written by Pål Johan From and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furthering the aim of reducing human exposure to hazardous environments, this monograph presents a detailed study of the modeling and control of vehicle-manipulator systems. The text shows how complex interactions can be performed at remote locations using systems that combine the manipulability of robotic manipulators with the ability of mobile robots to locomote over large areas. The first part studies the kinematics and dynamics of rigid bodies and standard robotic manipulators and can be used as an introduction to robotics focussing on robust mathematical modeling. The monograph then moves on to study vehicle-manipulator systems in great detail with emphasis on combining two different configuration spaces in a mathematically sound way. Robustness of these systems is extremely important and Modeling and Control of Vehicle-manipulator Systems effectively represents the dynamic equations using a mathematically robust framework. Several tools from Lie theory and differential geometry are used to obtain globally valid representations of the dynamic equations of vehicle-manipulator systems. The specific characteristics of several different types of vehicle-manipulator systems are included and the various application areas of these systems are discussed in detail. For underwater robots buoyancy and gravity, drag forces, added mass properties, and ocean currents are considered. For space robotics the effects of free fall environments and the strong dynamic coupling between the spacecraft and the manipulator are discussed. For wheeled robots wheel kinematics and non-holonomic motion is treated, and finally the inertial forces are included for robots mounted on a forced moving base. Modeling and Control of Vehicle-manipulator Systems will be of interest to researchers and engineers studying and working on many applications of robotics: underwater, space, personal assistance, and mobile manipulation in general, all of which have similarities in the equations required for modeling and control.

Download or read book Fundamentals in Modeling and Control of Mobile Manipulators written by Zhijun Li and published by CRC Press. This book was released on 2013-06-04 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile manipulators combine the advantages of mobile platforms and robotic arms, extending their operational range and functionality to large spaces and remote, demanding, and/or dangerous environments. They also bring complexity and difficulty in dynamic modeling and control system design. However, advances in nonlinear system analysis and control system design offer powerful tools and concepts for the control of mobile manipulator systems. Fundamentals in Modeling and Control of Mobile Manipulators presents a thorough theoretical treatment of several fundamental problems for mobile robotic manipulators. The book integrates fresh concepts and state-of-the-art results to systematically examine kinematics and dynamics, motion generation, feedback control, coordination, and cooperation. From this treatment, the authors form a basic theoretical framework for a mobile robotic manipulator that extends the theory of nonlinear control and applies to more realistic problems. Drawing on their research over the past ten years, the authors propose novel control theory concepts and techniques to tackle key problems. Topics covered include kinematic and dynamic modeling, control of nonholonomic systems, path planning that considers motion and manipulation, hybrid motion/force control and hybrid position/force control where the mobile manipulator is required to interact with environments, and coordination and cooperation strategies for multiple mobile manipulators. The book also includes practical examples of applications in engineering systems. This timely book investigates important scientific and engineering issues for researchers and engineers working with either single or multiple mobile manipulators for larger operational space, better cooperation, and improved productivity.

Download or read book Canadian Aeronautics and Space Journal written by and published by . This book was released on 1994 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotic Manipulators and Vehicles written by Gerasimos Rigatos and published by Springer. This book was released on 2018-05-24 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.