Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.
Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta Oliveira and published by . This book was released on 2020 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.
Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2010-06-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of virtual manufacturing has been developed in order to increase the industrial performances, being one of the most ef cient ways of reducing the m- ufacturing times and improving the quality of the products. Numerical simulation of metal forming processes, as a component of the virtual manufacturing process, has a very important contribution to the reduction of the lead time. The nite element method is currently the most widely used numerical procedure for s- ulating sheet metal forming processes. The accuracy of the simulation programs used in industry is in uenced by the constitutive models and the forming limit curves models incorporated in their structure. From the above discussion, we can distinguish a very strong connection between virtual manufacturing as a general concept, ?nite element method as a numerical analysis instrument and constitutive laws,aswellas forming limit curves as a speci city of the sheet metal forming processes. Consequently, the material modeling is strategic when models of reality have to be built. The book gives a synthetic presentation of the research performed in the eld of sheet metal forming simulation during more than 20 years by the members of three international teams: the Research Centre on Sheet Metal Forming—CERTETA (Technical University of Cluj-Napoca, Romania); AutoForm Company from Zürich, Switzerland and VOLVO automotive company from Sweden. The rst chapter presents an overview of different Finite Element (FE) formu- tions used for sheet metal forming simulation, now and in the past.
Download or read book Mechanics Modeling of Sheet Metal Forming written by Jwo Pan and published by SAE International. This book was released on 2007-04-10 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functioning as an introduction to modern mechanics principles and various applications that deal with the science, mathematics and technical aspects of sheet metal forming, Mechanics Modeling of Sheet Metal Forming details theoretically sound formulations based on principles of continuum mechanics for finite or large deformation, which can then be implemented into simulation codes. The forming processes of complex panels by computer codes, in addition to extensive practical examples, are recreated throughout the many chapters of this book in order to benefit practicing engineers by helping them better understand the output of simulation software.
Download or read book Numerical Modelling and Simulation of Metal Processing written by Christof Sommitsch and published by MDPI. This book was released on 2021-08-16 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with metal processing and its numerical modelling and simulation. In total, 21 papers from different distinguished authors have been compiled in this area. Various processes are addressed, including solidification, TIG welding, additive manufacturing, hot and cold rolling, deep drawing, pipe deformation, and galvanizing. Material models are developed at different length scales from atomistic simulation to finite element analysis in order to describe the evolution and behavior of materials during thermal and thermomechanical treatment. Materials under consideration are carbon, Q&T, DP, and stainless steels; ductile iron; and aluminum, nickel-based, and titanium alloys. The developed models and simulations shall help to predict structure evolution, damage, and service behavior of advanced materials.
Download or read book Modelling of Metal Forming Processes written by J.L. Chenot and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical modelling of metal forming processes has been widely used both in University and in Industry for many years. Relatively simple numerical models, such as the Slab Method and the Upper Bound Method, were first used and many such models are implemented in the industry for practical design or regulation of forming processes. These are also under investigation in the University, mainly for treat models ments which require low cost calculations or very fast answers for on-line integration. More recently, sophisticated numerical methods have been used for the simulation of metal flow during forming operations. Since the early works in 1973 and 1974, mainly in U. K. and U. S. A. , the applications of the finite element method to metal processing have been developed in many laboratories all over the world. Now the numerical approach seems to be widely re cognized as a powerful tool for comprehension oriented studies, for predic ting the main technological parameters, and for the design and the optlmi zation of new forming sequences. There is also a very recent trend for the introduction of physical laws in the thermo-mechanical models, in order to predict the local evolution of internal variable representing the micro structure of the metal. To day more and more practicians of the Industry are asking for compu ter models for design of their forming processes.
Download or read book Mechanics Modeling of Sheet Metal Forming written by Jwo Pan and published by SAE International. This book was released on 2007-04-10 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functioning as an introduction to modern mechanics principles and various applications that deal with the science, mathematics and technical aspects of sheet metal forming, Mechanics Modeling of Sheet Metal Forming details theoretically sound formulations based on principles of continuum mechanics for finite or large deformation, which can then be implemented into simulation codes. The forming processes of complex panels by computer codes, in addition to extensive practical examples, are recreated throughout the many chapters of this book in order to benefit practicing engineers by helping them better understand the output of simulation software.
Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by . This book was released on 2011-02-28 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a synthetic presentation of the research performed during more than twenty years by the members of the Research Centre on Sheet Metal Forming a" CERTETA (Technical University of Cluj-Napoca, Romania). The first chapter reminds some fundamental topics of the theory of plasticity. A more extended chapter is devoted to the presentation of the phenomenological yield criteria, emphasizing the formulations proposed by the CERTETA team (BBC models). The sheet metal formability is discussed in a separate chapter. After presenting the methods used for the formability assessment, the discussion focuses on the forming limit curves. In this context, the authors emphasize their contributions to the mathematical modeling of forming limit curves. The aspects related to the implementation of the constitutive models in finite-element codes are discussed in the last chapter of the book. The performances of the models are proved by the numerical simulation of various sheet metal forming processes: hydroforming, deep-drawing and bending. The book is useful for the students, doctoral fellows, researchers and engineers who are mainly interested in the mechanical modeling and numerical simulation of sheet metal forming processes.
Download or read book Multiscale Modelling in Sheet Metal Forming written by Dorel Banabic and published by Springer. This book was released on 2016-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a unified presentation of the research performed in the field of multiscale modelling in sheet metal forming over the course of more than thirty years by the members of six teams from internationally acclaimed universities. The first chapter is devoted to the presentation of some recent phenomenological yield criteria (BBC 2005 and BBC 2008) developed at the CERTETA center from the Technical University of Cluj-Napoca. An overview on the crystallographic texture and plastic anisotropy is presented in Chapter 2. Chapter 3 is dedicated to multiscale modelling of plastic anisotropy. The authors describe a new hierarchical multi-scale framework that allows taking into account the evolution of plastic anisotropy during sheet forming processes. Chapter 4 is focused on modelling the evolution of voids in porous metals with applications to forming limit curves and ductile fracture. The chapter details the steps needed for the development of dissipation functions and Gurson-type models for non-quadratic anisotropic plasticity criteria like BBC 2005 and those based on linear transformations. Chapter 5 describes advanced models for the prediction of forming limit curves developed by the authors. Chapter 6 is devoted to anisotropic damage in elasto-plastic materials with structural defects. Finally, Chapter 7 deals with modelling of the Portevin-Le Chatelier (PLC) effect. This volume contains contributions from leading researchers from the Technical University of Cluj-Napoca, Romania, the Catholic University of Leuven, Belgium, Clausthal University of Technology, Germany, Amirkabir University of Technology, Iran, the University of Bucharest, Romania, and the Institute of Mathematics of the Romanian Academy, Romania. It will prove useful to postgraduate students, researchers and engineers who are interested in the mechanical modeling and numerical simulation of sheet metal forming processes.
Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
Download or read book Friction Modeling in Computer Simulation of Sheet Metal Forming Processes written by Tze-chi Hsu and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sheet Metal Forming written by Taylan Altan and published by ASM International. This book was released on 2012 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical and comprehensive reference gives the latest developments on the design of sheet forming operations, equipment, tooling, and process modeling. Individual chapters cover all major sheet forming processes such as blanking, bending, deep drawing, and more. Process modeling using finite element analysis is described in one chapter and discussed in all appropriate chapters. Other chapters cover sensors and die materials, which are critical for practical sheet forming applications. Other topics include relatively new technologies, such as warm forming of magnesium and aluminum alloys, forming of advanced high-strength steels (AHSS), and hot stamping. Chapters also address special sheet forming operations, like spinning, incremental forming, and mechanical joining, and processes related to sheet forming, such as sheet and tube hydroforming, roll forming, and high-velocity forming.
Download or read book Advanced Methods in Material Forming written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2007-05-16 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the most relevant papers presented in the International Conference on Materials Forming, ESAFORM 2005. It gathers selected plenary and keynote papers presented in the conference, offering an up-to-date synthesis of the academic and industrial research in the fields of physical and numerical modeling of materials forming processes.
Download or read book Analysis and Optimization of Sheet Metal Forming Processes written by Amrut Mulay and published by CRC Press. This book was released on 2024-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analysis and Optimization of Sheet Metal Forming Processes comprehensively covers sheet metal forming, from choosing materials, tools and the forming method to optimising the entire process through finite element analysis and computer aided engineering. Beginning with an introduction to sheet metal forming, the book provides a guide to the various techniques used within the industry. It provides a discussion of sheet metal properties relevant to forming processes, such as ductility, formability, and strength, and analyses how materials should be selected with factors including material properties, cost and availability. Forming processes including shearing, bending, deep drawing, and stamping are also discussed, along with tools such as dies, punches and moulds. Simulation and modelling are key to optimising the sheet metal forming process, including finite element analysis and computer aided engineering. Other topics included are quality control, design, industry applications and future trends. The book will be of interest to students and professionals working in the field of sheet metal and metal forming, materials science, mechanical engineering and metallurgy"--
Download or read book Computer Aided Modeling of Selected Sheet Metal Forming Processes written by T. Altan and published by . This book was released on 1982 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet metal forming processes, such as brake bending, rubber forming, and punch stretch forming, have significant use in manufacturing aircraft, automotive, and appliance parts. Computer-aided modeling and simulation of these processes provides information for production planning, for equipment and tooling selection, and for predicting potential failure during forming. Mathematical models and computer programs are developed to analyze and simulate these widely used sheet forming processes. The validity of these process models and the accuracy of the predicted results were evaluated by laboratory and production site tests.
Download or read book Mechanics of Sheet Metal Forming written by Z. Marciniak and published by Butterworth-Heinemann. This book was released on 2002-06-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material properties -- Sheet deformation processes -- Deformation of sheet in plane stress -- Simplified stamping analysis -- Load instability and tearing -- Bending of sheet -- Simplified analysis of circular shells -- Cylindrical deep drawing -- Stretching circular shells -- Combined bending and tension of sheet -- Hydroforming.
Download or read book Micromechanical Modeling and Simulation of Forming Processes written by Glavas, Vedran and published by KIT Scientific Publishing. This book was released on 2016-12-21 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deep drawing of an aluminum alloy used in the packaging industry for the beverage can manufacturing process is investigated. In this work, the effective constitutive behavior is based on a crystal plasticity model in combination with a non-linear Hashin-Shtrikman type homogenization scheme in which a reference stiffness controls the stress and strain fluctuations. The simulation results are compared to experiments in terms of deep drawing earing profiles, texture evolution, and localization.
