Download or read book Systemic Design Methodologies for Electrical Energy Systems written by Xavier Roboam and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partnerships with other European and international research institutions. Scientists and engineers in the field of electrical engineering, especially teachers/researchers because of the focus on methodological issues, will find this book extremely useful, as will PhD and Masters students in this field.
Download or read book Information Control Problems in Manufacturing Technology 1992 written by M.B. Zaremba and published by Elsevier. This book was released on 2016-02-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain more than 80 of the best papers presented at the INCOM '92 Symposium, and relate to the vast changes which are occurring worldwide in manufacturing technology. Research oriented technical papers cover subjects such as: simulation of manufacturing processes; sensor based robots; information systems; general aspects of CIM and manufacturing networks.
Download or read book Conception syst mique pour la conversion d nergie lectrique 1 gestion analyse et synth se written by ROBOAM Xavier and published by Lavoisier. This book was released on 2012-11-06 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Le contexte actuel mène les concepteurs vers des systèmes toujours plus complexes et performants, intégrant un grand nombre d’éléments souvent fortement couplés et appartenant à divers champs de la physique énergétique. Après une présentation de l’approche systémique de conception, ce premier volume rassemble les points-clés permettant de modéliser et de caractériser efficacement des systèmes multiphysiques (formalismes graphiques, Bond Graphs, GIC/REM), d’analyser la qualité et la stabilité des réseaux et de contribuer à la robustesse en conception intégrée. La gestion de l’énergie des systèmes énergétiques hybrides incluant du stockage est également largement détaillée et différentes méthodes statistiques permettant de dimensionner les réseaux ou de caractériser leur sûreté de fonctionnement sont proposées (par exemple, la méthode de Monte-Carlo). Les techniques d’analyse, de synthèse et de gestion présentées dans cet ouvrage participent à l’optimisation des systèmes énergétiques. Elles sont complétées par des approches spécifiquement orientées vers la conception par optimisation, objets du second volume.
Download or read book Power Electronics Converters and their Control for Renewable Energy Applications written by Arezki Fekik and published by Elsevier. This book was released on 2023-06-21 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Converters and their Control for Renewable Energy Applications provides information that helps to solve common challenges with power electronics converters, including loss by switching, heating of power switches, management of switching time, improvement of the quality of the signals delivered by power converters, and improvement of the quality of energy produced by renewable energy sources. This book is of interest to academics, researchers, and engineers in renewable energy, power systems, electrical engineering, electronics, and mechanical engineering. - Includes important visual illustrations and imagery of concise circuit schematics and renewable energy applications - Features a templated approach for step-by-step implementation of the new MPPT algorithm based on recent and intelligent techniques - Provides methods for optimal harnessing of energy from renewable energy sources and converter topology synthesis
Download or read book Modeling of Turbomachines for Control and Diagnostic Applications written by Igor Loboda and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new studies in the area of turbomachine mathematical modeling with a focus on models applied to developing engine control and diagnostic systems. The book contains one introductory and four main chapters. The introductory chapter describes the area of modeling of gas and wind turbines and shows the demand for further improvement of the models. The first three main chapters offer particular improvements in gas turbine modeling. First, a novel methodology for the modeling of engine starting is presented. Second, a thorough theoretical comparative analysis is performed for the models of engine internal gas capacities, and practical recommendations are given on model applications, in particular for engine control purposes. Third, multiple algorithms for calculating important unmeasured parameters for engine diagnostics are proposed and compared. It is proven that the best algorithms allow accurate prognosis of engine remaining lifetime.The field of wind turbine modeling is presented in the last main chapter. It introduces a general-purpose model that describes both aerodynamic and electric parts of a wind power plant. Such a detailed physics-based model will help with the development of more accurate control and diagnostic systems.In this way, this book includes four new studies in the area of gas and wind turbine modeling. These studies will be interesting and useful for specialists in turbine engine control and diagnostics.
Download or read book Dynamic Modelling and Control of National Economies 1983 written by T. Basar and published by Elsevier. This book was released on 2014-05-17 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Modelling and Control of National Economies 1983 contains the proceedings of the Fourth IFAC/IFORS/IIASA Conference and the 1983 SEDC Conference on Economic Dynamics and Control held at Washington D.C., USA on June17-19, 1983. Separating the 65 papers presented in the conference as chapters, this book covers a broad class of problems or notions arising both in economic theory, control applications to planning, and implementation issues. Some chapters discuss multi-level interactions of government and private sectors in economic development; inflation and economic policy in an open economy; foreign debt and exchange rate stability in a developing country; and expectations in numerical general equilibrium models. This book also explains a rational decision-making process for resource policymaking; inference of the structure of economic reasoning from natural language analysis; modeling and analysis of a national economy; and methodological issues in global modeling. Econometric analysis of the economic effects of population change, aspects of optimal estimation control strategies in econometrics, and optimal policies for interdependent economies are also discussed. This book will be useful to those engaged in economic and control theory research.
Download or read book Elsevier s Dictionary of Automation Technics written by B. Zhelyazova and published by Elsevier. This book was released on 2005-04-28 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 13,000 terms with more than 4,000 cross-references used in the following fields: automation, technology of management and regulation, computing machine and data processing, computer control, automation of industry, laser technology, theory of information and theory of signals, theory of algorithms and programming, philosophical bases of cybernetics, cybernetics and mathematical methods.Automation pertains to the theory, art, or technique of making a machine, a process or a device more fully automatic. Computers and information processing equipment play a large role in the automation of a process because of the inherent ability of a computer to develop decision that will, in effect, control or govern the process from the information received by the computer concerning the status of the process. Thus automation pertains to both the theory, and techniques of using automatic systems in industrial applications and the processes of investigation, design and conversion to automatic methods. Automatic control, automatic materials handling, automatic testing, automatic packaging, for continuous as well as batch processing, are all considered parts of the overall or completely automatic process.The Dictionary consists of two parts, Basic Table and Indexes. In the first part the English terms are listed alphabetically, numbered consecutively and followed by its German, French and Russian equivalents. English synonyms appear as cross-references to the main entries in their proper alphabetical order. The second part of the Dictionary, the Indexes, contains separate alphabetical indexes of the German, French and Russian terms. The reference number(s) with each term stands for the number of the English term(s) in the basic table.Elsevier's Dictionary of Automatic Technics will be a valuable tool for specialists, scientists, students and everyone who takes interest in the problems of investigation devoted to the design, development, and applications of methods and techniques for rendering a process of group of machines self-actuating, self-moving, or self-controlling.
Download or read book The Edition XII Guide written by Edition XII and published by . This book was released on 1995 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Over 500 profiles of Postgraduate Science, Health, Computer Sciences and Engineering courses. A comprehensive reference section, with details of over 10 000 Postgraduate Science and Engineering courses. There is also practical editorial giving useful and essential advice and information"--Back cover.
Download or read book Business Information Systems Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2010-06-30 with total page 2319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business Information Systems: Concepts, Methodologies, Tools and Applications offers a complete view of current business information systems within organizations and the advancements that technology has provided to the business community. This four-volume reference uncovers how technological advancements have revolutionized financial transactions, management infrastructure, and knowledge workers.
Download or read book Electrical Actuators written by Bernard de Fornel and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The different chapters of this book cover a large range of information regarding electrical actuators, including: synchronous and asynchronous machine modeling in order to measure and identify offline and online parameters using modern optimization methods; identification in real time of parameters with Luenberger filter and the extended Kalman filter; estimation of non-measurable variables, first by linear estimates and observers, then by lower observers. Robustness is a very problematic issue, as well, which is fully explored in a chapter dedicated to the subject. Finally, the estimate of non-measurable mechanical variables is particularly dealt with: estimate of load moment, then observation of the positioning of a command without mechanical sensor. The conditions to measure variables and real implementation of numerical algorithms are also examined with particular attention.
Download or read book Bond Graph Modelling of Engineering Systems written by Wolfgang Borutzky and published by Springer Science & Business Media. This book was released on 2011-06-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents current work in bond graph methodology by providing a compilation of contributions from experts across the world that covers theoretical topics, applications in various areas as well as software for bond graph modeling. It addresses readers in academia and in industry concerned with the analysis of multidisciplinary engineering systems or control system design who are interested to see how latest developments in bond graph methodology with regard to theory and applications can serve their needs in their engineering fields. This presentation of advanced work in bond graph modeling presents the leading edge of research in this field. It is hoped that it stimulates new ideas with regard to further progress in theory and in applications.
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Optimisation en sciences de l ing nieur M thodes exactes written by BORNE Pierre and published by Lavoisier. This book was released on 2013-03-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimisation en sciences de l’ingénieur présente les principales méthodes exactes d’optimisation statique et dynamique. Parmi les méthodes décrites, figurent : la programmation linéaire avec plusieurs implémentations et la programmation non linéaire, particulièrement détaillée compte tenu de la grande variété d’algorithmes existants ; la programmation dynamique avec divers exemples d’application ; les réseaux de Hopfield ; l’optimisation en identification des systèmes ; l’optimisation des systèmes dynamiques avec notamment l’application à la commande des processus, l’optimisation des systèmes de grandes dimensions et des systèmes d’information. Didactique, cet ouvrage propose des références permettant au lecteur d’approfondir les diverses méthodes traitées. Lorsque les algorithmes étudiés le permettent, sans trop agrandir les présentations, des exemples d’implémentation sont proposés.
Download or read book Applications of Nonlinear Control written by Meral Altınay and published by BoD – Books on Demand. This book was released on 2012-06-13 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: A trend of investigation of Nonlinear Control Systems has been present over the last few decades. As a result the methods for its analysis and design have improved rapidly. This book includes nonlinear design topics such as Feedback Linearization, Lyapunov Based Control, Adaptive Control, Optimal Control and Robust Control. All chapters discuss different applications that are basically independent of each other. The book will provide the reader with information on modern control techniques and results which cover a very wide application area. Each chapter attempts to demonstrate how one would apply these techniques to real-world systems through both simulations and experimental settings.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 36 (thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 36 reports theses submitted in 1991, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
