Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Historical Earthquake Resistant Timber Frames in the Mediterranean Area written by Nicola Ruggieri and published by Springer. This book was released on 2016-10-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the best papers from the HEaRT 2013 conference, held in Cosenza, Italy, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe’s architectural heritage.
Download or read book An Engineer s Guide to Technical Communication written by Sheryl Ann Sorby and published by Prentice Hall. This book was released on 2006 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by engineers for engineers, this practical textbook is designed to develop the communication skills needed by all types of engineering students to be successful both in college and the workplace. Real engineering documents are included in each chapter providing helpful guidelines to the preparation of documents.
Download or read book Historical Earthquake Resistant Timber Framing in the Mediterranean Area written by Helena Cruz and published by Springer. This book was released on 2016-08-29 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe’s architectural heritage.
Download or read book Springer Handbook of Wood Science and Technology written by Peter Niemz and published by Springer Nature. This book was released on 2023-04-01 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an overview on wood science and technology of unparalleled comprehensiveness and international validity. It describes the fundamental wood biology, chemistry and physics, as well as structure-property relations of wood and wood-based materials. The different aspects and steps of wood processing are presented in detail from both a fundamental technological perspective and their realisation in industrial contexts. The discussed industrial processes extend beyond sawmilling and the manufacturing of adhesively bonded wood products to the processing of the various wood-based materials, including pulp and paper, natural fibre materials and aspects of bio-refinery. Core concepts of wood applications, quality and life cycle assessment of this important natural resource are presented. The book concludes with a useful compilation of fundamental material parameters and data as well as a glossary of terms in accordance with the most important industry standards. Written and edited by a truly international team of experts from academia, research institutes and industry, thoroughly reviewed by external colleagues, this handbook is well-attuned to educational demands, as well as providing a summary of state-of-the-art research trends and industrial requirements. It is an invaluable resource for all professionals in research and development, and engineers in practise in the field of wood science and technology.
Download or read book Historical Earthquake Resistant Timber Frames in the Mediterranean Area written by Nicola Ruggieri and published by Springer. This book was released on 2015-03-16 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the best papers from the HEaRT 2013 conference, held in Cosenza, Italy, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe’s architectural heritage.
Download or read book Timber Connections written by Rohana Hassan and published by Springer Nature. This book was released on 2023-04-19 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of mathematical and fundamental theory as stated in the relevant standards, namely EYM and NDS. Timber is one of the important building materials in the field of engineering, other than concrete and steel. However, there is still a lot of unexplored knowledge about timber, including how timber connections are made. One of the main types of timber connection is mortise and tenon. Mortise and tenon are widely seen as one of the most important traditional timber structural joint. In order to understand the load-carrying capacity and performance of the structural mortise and tenon joint, the existing theoretical background of timber joint design is made as a reference. Current equations applicable in estimating the load-carrying capacity of timber joint uses the European Yield Model (EYM). Therefore, the main aim of this book is to share the basic design knowledge, inclusive of safety factor limitations (as engineering main factor) in structural design.
Download or read book Proceedings of the 2024 8th International Conference on Civil Architecture and Structural Engineering ICCASE 2024 written by Bingxiang Yuan and published by Springer Nature. This book was released on 2024 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung: This is an open access book. 2024 8th International Conference on Civil Architecture and Structural Engineering (ICCASE 2024) will be held in Guangzhou during April 19-21, 2024. The conference mainly discussed research areas such as "Engineering Structures", "Smart Buildings", "Building Materials", "Structural Seismic Resistance", "Monitoring and Testing", "Geotechnical Engineering", and "Underground Space Engineering". Intended to provide an exchange platform for experts, scholars, engineering technicians, and technical research and development personnel in related fields. By discussing scientific research achievements and cutting-edge technologies, understanding academic development trends, broadening research ideas, strengthening academic research and exploration, and promoting the industrialization of academic achievements
Download or read book Traditional Timber Joinery written by Robert L. Brungraber and published by . This book was released on 1985 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Employs modern structural analysis methods to assess the strength of pegged, mortise and tenon joinery.
Download or read book PROCEEDINGS 4th International Congress on Science and Technology for the Safeguard of Cultural Heritage in the Mediterranean Basin VOL I written by and published by Angelo Ferrari. This book was released on with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange
Download or read book Traditional and Innovative Approaches in Seismic Design written by Linda Giresini and published by MDPI. This book was released on 2018-03-19 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Traditional and Innovative Approaches in Seismic Design" that was published in Buildings
Download or read book Earthquake Engineering written by P. Bisch and published by CRC Press. This book was released on 1998-01-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the proceedings of the 11th European Conference on Earthquake Engineering. CD-ROM contains full text of the 650 papers in printed form. This would have been 6 volumes of 1000 pages each. Topics covered: are: Engineering seismology; Experimental aspects for soils, rocks and construction material; Computational aspects for materials, structures and soil-structure interaction; Civil engineering projects; Active and passive isolation; Industrial facilities, lifelines and equipment; Vulnerability, seismic risk and strengthening; Site effects and spatial variability of seismic motions; Reliability analyses and probabilistic aspects; Design criteria, codees and standards; Eurocode 8 and national applications; Seismic risk in the Mediterranean basin; Post earthquake investigations;
Download or read book PRO 22 International RILEM Symposium on Joints in Timber Structures written by Simon Aicher and published by RILEM Publications. This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Analysis of Historical Constructions Anamnesis Diagnosis Therapy Controls written by Koen Van Balen and published by CRC Press. This book was released on 2016-11-03 with total page 1879 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls contains the papers presented at the 10th International Conference on Structural Analysis of Historical Constructions (SAHC2016, Leuven, Belgium, 13-15 September 2016). The main theme of the book is “Anamnesis, Diagnosis, Therapy, Controls”, which emphasizes the importance of all steps of a restoration process in order to obtain a thorough understanding of the structural behaviour of built cultural heritage. The contributions cover every aspect of the structural analysis of historical constructions, such as material characterization, structural modelling, static and dynamic monitoring, non-destructive techniques for on-site investigation, seismic behaviour, rehabilitation, traditional and innovative repair techniques, and case studies. The knowledge, insights and ideas in Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls make this book of abstracts and the corresponding, digital full-colour conference proceedings containing the full papers must-have literature for researchers and practitioners involved in the structural analysis of historical constructions.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
