Download or read book Modeling Self Heating Effects in Nanoscale Devices written by Katerina Raleva and published by Morgan & Claypool Publishers. This book was released on 2017-09-13 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is generally acknowledged that modeling and simulation are preferred alternatives to trial and error approaches to semiconductor fabrication in the present environment, where the cost of process runs and associated mask sets is increasing exponentially with successive technology nodes. Hence, accurate physical device simulation tools are essential to accurately predict device and circuit performance. Accurate thermal modelling and the design of microelectronic devices and thin film structures at the micro- and nanoscales poses a challenge to electrical engineers who are less familiar with the basic concepts and ideas in sub-continuum heat transport. This book aims to bridge that gap. Efficient heat removal methods are necessary to increase device performance and device reliability. The authors provide readers with a combination of nanoscale experimental techniques and accurate modelling methods that must be employed in order to determine a device's temperature profile.
Download or read book Modeling Self Heating Effects in Nanoscale Devices written by D Vasileska and published by Myprint. This book was released on 2017-08-31 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Self heating Effects in Nanoscale Devices written by Katerina Raleva and published by . This book was released on 2017 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate thermal modeling and the design of microelectronic devices and thin film structures at the micro- and nanoscales poses a challenge to electrical engineers who are less familiar with the basic concepts and ideas in sub-continuum heat transport. This book aims to bridge that gap. Efficient heat removal methods are necessary to increase device performance and device reliability. The authors provide readers with a combination of nanoscale experimental techniques and accurate modeling methods that must be employed in order to determine a device's temperature profile.
Download or read book Nanophononics written by Zlatan Aksamija and published by CRC Press. This book was released on 2017-11-22 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat in most semiconductor materials, including the traditional group IV elements (Si, Ge, diamond), III–V compounds (GaAs, wide-bandgap GaN), and carbon allotropes (graphene, CNTs), as well as emerging new materials like transition metal dichalcogenides (TMDCs), is stored and transported by lattice vibrations (phonons). Phonon generation through interactions with electrons (in nanoelectronics, power, and nonequilibrium devices) and light (optoelectronics) is the central mechanism of heat dissipation in nanoelectronics. This book focuses on the area of thermal effects in nanostructures, including the generation, transport, and conversion of heat at the nanoscale level. Phonon transport, including thermal conductivity in nanostructured materials, as well as numerical simulation methods, such as phonon Monte Carlo, Green’s functions, and first principles methods, feature prominently in the book, which comprises four main themes: (i) phonon generation/heat dissipation, (i) nanoscale phonon transport, (iii) applications/devices (including thermoelectrics), and (iv) emerging materials (graphene/2D). The book also covers recent advances in nanophononics—the study of phonons at the nanoscale. Applications of nanophononics focus on thermoelectric (TE) and tandem TE/photovoltaic energy conversion. The applications are augmented by a chapter on heat dissipation and self-heating in nanoelectronic devices. The book concludes with a chapter on thermal transport in nanoscale graphene ribbons, covering recent advances in phonon transport in 2D materials. The book will be an excellent reference for researchers and graduate students of nanoelectronics, device engineering, nanoscale heat transfer, and thermoelectric energy conversion. The book could also be a basis for a graduate special topics course in the field of nanoscale heat and energy.
Download or read book Nanoscale Devices written by Brajesh Kumar Kaushik and published by CRC Press. This book was released on 2018-11-16 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary aim of this book is to discuss various aspects of nanoscale device design and their applications including transport mechanism, modeling, and circuit applications. . Provides a platform for modeling and analysis of state-of-the-art devices in nanoscale regime, reviews issues related to optimizing the sub-nanometer device performance and addresses simulation aspect and/or fabrication process of devices Also, includes design problems at the end of each chapter
Download or read book Hot Carrier Degradation in Semiconductor Devices written by Tibor Grasser and published by Springer. This book was released on 2014-10-29 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a variety of tools to address the challenges posed by hot carrier degradation, one of today’s most complicated reliability issues in semiconductor devices. Coverage includes an explanation of carrier transport within devices and book-keeping of how they acquire energy (“become hot”), interaction of an ensemble of colder and hotter carriers with defect precursors, which eventually leads to the creation of a defect, and a description of how these defects interact with the device, degrading its performance.
Download or read book Handbook of Optoelectronic Device Modeling and Simulation written by Joachim Piprek and published by CRC Press. This book was released on 2017-10-12 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive survey of fundamental concepts and methods for optoelectronic device modeling and simulation. Gives a broad overview of concepts with concise explanations illustrated by real results. Compares different levels of modeling, from simple analytical models to complex numerical models. Discusses practical methods of model validation. Includes an overview of numerical techniques.
Download or read book ICT Innovations 2009 written by Danco Davcev and published by Springer Science & Business Media. This book was released on 2010-01-06 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of the first International Conference ICT Innovations 2009. The ICT Innovations conference is the primary scientific action of the Macedonian Society on Information and Communication Technologies (ICT-ACT). It promotes the publication of scientific results of the international community related to innovative fundamental and applied research in ICT. Today, ICT has enlarged its horizons and it is practiced under multidisciplinary contexts that introduce new challenges to theore- cal and technical approaches. The ICT Innovations 2009 conference gathered academics, professionals and pr- titioners reporting their valuable experiences in developing solutions and systems in the industrial and business arena especially innovative commercial implementations, novel applications of technology, and experience in applying recent research advances to practical situations, in any ICT areas. The conference focuses on issues concerning a variety of ICT fields like: • Multimedia Information Systems • Artificial Intelligence • Pervasive and Ubiquitous Computing • Eco and Bio Informatics • Internet and Web Applications and Services • Wireless and Mobile Communications and Services • Computer Networks, Security and Cryptography • Distributed Systems, GRID and Cloud Computing ICT Innovations 2009 Conference was held in Ohrid, Macedonia, in September 28-30, 2009. Local arrangements provided by the members of the Macedonian Society on Information and Communication Technologies – ICT-ACT, mainly consisting of teaching and research staff of Computer Science Department at Faculty of Electrical Engineering and Information Technologies and Institute of Informatics at Faculty of Natural Sciences, both at Ss. Cyril and Methodius University in Skopje, Macedonia.
Download or read book Computational Electronics written by Dragica Vasileska and published by CRC Press. This book was released on 2017-12-19 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting with the simplest semiclassical approaches and ending with the description of complex fully quantum-mechanical methods for quantum transport analysis of state-of-the-art devices, Computational Electronics: Semiclassical and Quantum Device Modeling and Simulation provides a comprehensive overview of the essential techniques and methods for effectively analyzing transport in semiconductor devices. With the transistor reaching its limits and new device designs and paradigms of operation being explored, this timely resource delivers the simulation methods needed to properly model state-of-the-art nanoscale devices. The first part examines semiclassical transport methods, including drift-diffusion, hydrodynamic, and Monte Carlo methods for solving the Boltzmann transport equation. Details regarding numerical implementation and sample codes are provided as templates for sophisticated simulation software. The second part introduces the density gradient method, quantum hydrodynamics, and the concept of effective potentials used to account for quantum-mechanical space quantization effects in particle-based simulators. Highlighting the need for quantum transport approaches, it describes various quantum effects that appear in current and future devices being mass-produced or fabricated as a proof of concept. In this context, it introduces the concept of effective potential used to approximately include quantum-mechanical space-quantization effects within the semiclassical particle-based device simulation scheme. Addressing the practical aspects of computational electronics, this authoritative resource concludes by addressing some of the open questions related to quantum transport not covered in most books. Complete with self-study problems and numerous examples throughout, this book supplies readers with the practical understanding required to create their own simulators.
Download or read book Modeling Self Heating Effects in Nanoscale Devices written by Katerina Raleva and published by Iop Concise Physics. This book was released on 2017-09-13 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is generally acknowledged that modeling and simulation are preferred alternatives to trial and error approaches to semiconductor fabrication in the present environment, where the cost of process runs and associated mask sets is increasing exponentially with successive technology nodes. Hence, accurate physical device simulation tools are essential to accurately predict device and circuit performance. Accurate thermal modelling and the design of microelectronic devices and thin film structures at the micro- and nanoscales poses a challenge to electrical engineers who are less familiar with the basic concepts and ideas in sub-continuum heat transport. This book aims to bridge that gap. Efficient heat removal methods are necessary to increase device performance and device reliability. The authors provide readers with a combination of nanoscale experimental techniques and accurate modelling methods that must be employed in order to determine a device's temperature profile.
Download or read book Nanoscale Silicon Devices written by Shunri Oda and published by CRC Press. This book was released on 2018-09-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Is Bigger Always Better? Explore the Behavior of Very Small Devices as Described by Quantum Mechanics Smaller is better when it comes to the semiconductor transistor. Nanoscale Silicon Devices examines the growth of semiconductor device miniaturization and related advances in material, device, circuit, and system design, and highlights the use of device scaling within the semiconductor industry. Device scaling, the practice of continuously scaling down the size of metal-oxide-semiconductor field-effect transistors (MOSFETs), has significantly improved the performance of small computers, mobile phones, and similar devices. The practice has resulted in smaller delay time and higher device density in a chip without an increase in power consumption. This book covers recent advancements and considers the future prospects of nanoscale silicon (Si) devices. It provides an introduction to new concepts (including variability in scaled MOSFETs, thermal effects, spintronics-based nonvolatile computing systems, spin-based qubits, magnetoelectric devices, NEMS devices, tunnel FETs, dopant engineering, and single-electron transfer), new materials (such as high-k dielectrics and germanium), and new device structures in three dimensions. It covers the fundamentals of such devices, describes the physics and modeling of these devices, and advocates further device scaling and minimization of energy consumption in future large-scale integrated circuits (VLSI). Additional coverage includes: Physics of nm scaled devices in terms of quantum mechanics Advanced 3D transistors: tri-gate structure and thermal effects Variability in scaled MOSFET Spintronics on Si platform NEMS devices for switching, memory, and sensor applications The concept of ballistic transport The present status of the transistor variability and more An indispensable resource, Nanoscale Silicon Devices serves device engineers and academic researchers (including graduate students) in the fields of electron devices, solid-state physics, and nanotechnology.
Download or read book Nanoelectronic Device Applications Handbook written by James E. Morris and published by CRC Press. This book was released on 2017-11-22 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal–oxide–semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world. These include: Nanoscale advances in current MOSFET/CMOS technology Nano capacitors for applications such as electronics packaging and humidity sensors Single electron transistors and other electron tunneling devices Quantum cellular automata and nanomagnetic logic Memristors as switching devices and for memory Graphene preparation, properties, and devices Carbon nanotubes (CNTs), both single CNT and random network Other CNT applications such as terahertz, sensors, interconnects, and capacitors Nano system architectures for reliability Nanowire device fabrication and applications Nanowire transistors Nanodevices for spintronics The book closes with a call for a new generation of simulation tools to handle nanoscale mechanisms in realistic nanodevice geometries. This timely handbook offers a wealth of insights into the application of nanoelectronics. It is an invaluable reference and source of ideas for anyone working in the rapidly expanding field of nanoelectronics.
Download or read book Computer Aided Design Of Micro And Nanoelectronic Devices written by Chinmay Kumar Maiti and published by World Scientific. This book was released on 2016-10-27 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nanoelectronic devices are the prime movers for electronics, which is essential for the current information age. This unique monograph identifies the key stages of advanced device design and integration in semiconductor manufacturing. It brings into one resource a comprehensive device design using simulation. The book presents state-of-the-art semiconductor device design using the latest TCAD tools.Professionals, researchers, academics, and graduate students in electrical & electronic engineering and microelectronics will benefit from this reference text.
Download or read book Emerging VLSI Devices Circuits and Architectures written by Anu Gupta and published by Springer Nature. This book was released on with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Women in Microelectronics written by Alice Cline Parker and published by Springer Nature. This book was released on 2020-07-16 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains stories of women engineers’ paths through the golden age of microelectronics, stemming from the invention of the transistor in 1947. These stories, like the biographies of Marie Curie and the National Geographic’s stories of Jane Goodall’s research that inspired the authors will inspire and guide readers along unconventional pathways to contributions to microelectronics that we can only begin to imagine. The book explores why and how the women writing here chose their career paths and how they navigated their careers. This topic is of interest to a vast audience, from students to professionals to university advisers to industry CEOs, who can imagine the advantages of a future with a diverse work force. Provides insight into women’s early contributions to the field of microelectronics and celebrates the challenges they overcame; Presents compelling innovations from academia, research, and industry into advances, applications, and the future of microelectronics; Includes a fascinating look into topics such as nanotechnologies, video games, analog electronics, design automation, and neuromorphic circuits.
Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.
Download or read book Technology Evolution for Silicon Nano Electronics written by Seiichi Miyazaki and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the proceedings of the International Symposium on Technology Evolution for Silicon Nano-Electronics 2010, June 3-5, 2010, Tokyo Institute of Technology, Tokyo, Japan
