Download or read book Proceedings of the 2022 USCToMM Symposium on Mechanical Systems and Robotics written by Pierre Larochelle and published by Springer Nature. This book was released on 2022-03-31 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest fundamental research contributions, innovations, and applications in the field of design and analysis of complex robotic mechanical systems, machines, and mechanisms, as presented by leading international researchers at the 2nd USCToMM Symposium on Mechanical Systems and Robotics (USCToMM MSR), held in Rapid City, South Dakota, USA on May 19-21, 2022. It covers highly diverse topics, including soft, wearable and origami robotic systems; applications to walking, flying, climbing, underground, swimming and space systems; human rehabilitation and performance augmentation; design and analysis of mechanisms and machines; human-robot collaborative systems; service robotics; mechanical systems and robotics education; and the commercialization of mechanical systems and robotics. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting and impactful research results that will inspire novel research directions and foster multidisciplinary research collaborations among researchers from around the globe.
Download or read book Smart Electrical and Mechanical Systems written by Rakesh Sehgal and published by Academic Press. This book was released on 2022-06-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Electrical and Mechanical Systems: An Application of Artificial Intelligence and Machine Learning is an international contributed work with the most up-to-date fundamentals and conventional methods used in smart electrical and mechanical systems. Detailing methods and procedures for the application of ML and AI, it is supported with illustrations of the systems, process diagrams visuals of the systems and/or their components, and supportive data and results leading to the benefits and challenges of the relevant applications. The multidisciplinary theme of the book will help researchers build a synergy between electrical and mechanical engineering systems. The book guides readers on not only how to effectively solve problems but also provide high accuracy needed for successful implementation. Interdisciplinary in nature, the book caters to the needs of the electrical and mechanical engineering industry by offering details on the application of AI and ML in robotics, design and manufacturing, image processing, power system operation and forecasting with suitable examples. - Includes significant case studies related to application of Artificial Intelligence and Machine Learning in Energy and Power, Mechanical Design and Manufacturing - Contains supporting illustrations and tables, along with a valuable set of references at the end of each chapter - Provides original, state-of-the-art research material written by international and national respected contributors
Download or read book Smart Trends in Computing and Communications written by Tomonobu Senjyu and published by Springer Nature. This book was released on 2023 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at the Seventh International Conference on Smart Trends in Computing and Communications (SmartCom 2022), organized by Global Knowledge Research Foundation (GR Foundation) from January 24-25, 2023, in Jaipur, India. It covers the state-of-the-art and emerging topics in information, computer communications, and effective strategies for their use in engineering and managerial applications. It also explores and discusses the latest technological advances in, and future directions for, information and knowledge computing and its applications.
Download or read book Artificial Intelligence in Real Time Control written by M. G. Rodd and published by Elsevier. This book was released on 2014-05-23 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Real-Time Control documents the proceedings of the IFAC Workshop held in Clyne Castle, Swansea, UK, 21-23 September 1988. It includes two keynote addresses that discussed architectural issues for expert systems in real-time control; the problem of representing knowledge and reasoning; and the problems encountered in obtaining such information. Other papers contained in these proceedings are representative of the major research bodies active throughout the world in the application of AI techniques in real-time control, although it was inevitable that a Europe-based conference would highlight the work of the European groups. While AI is clearly still in the process of establishing itself, it is undoubtedly a major new area of engineering endeavor. Practical experience is still relatively limited, and many of the results discussed at this event were obtained through simulation or, in a few cases, from reduced practical experience. The importance, though, lies in the fact that many countries are pouring extensive resources into the attempt to control difficult processes by using AI techniques. The wide cross section of interest was demonstrated by the fact that many diverse industries were represented at the workshop—ranging from power-systems control to telecommunications, and into the steel industry.
Download or read book Energy And Mechanical Engineering Proceedings Of 2015 International Conference written by Steven Y Liang and published by World Scientific. This book was released on 2016-03-03 with total page 1329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Energy and Mechanical Engineering brought together scientists and engineers from energy and engineering sectors to share and compare notes on the latest development in energy science, automation, control and mechanical engineering. This proceedings compiled and selected 156 articles organized into Energy Science and Technology; Mechanical Engineering; Automation and Control Engineering. Amongst them, are the results and development of Government sponsored research projects undertaken both in universities, research institutes, and across industry, reflecting the state-of-art technological know-how of Chinese scientists.
Download or read book Artificial Intelligence Applications in Battery Management Systems and Routing Problems in Electric Vehicles written by Angalaeswari, S. and published by IGI Global. This book was released on 2023-02-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s modern society, to reduce the carbon dioxide gas emission from motor vehicles and to save mother nature, electric vehicles are becoming more practical. As more people begin to see the benefits of this technology, further study on the challenges and best practices is required. Artificial Intelligence Applications in Battery Management Systems and Routing Problems in Electric Vehicles focuses on the integration of renewable energy sources with the existing grid, introduces a power exchange scenario in the prevailing power market, considers the use of the electric vehicle market for creating cleaner and transformative energy, and optimizes the control variables with artificial intelligence techniques. Covering key topics such as artificial intelligence, smart grids, and sustainable development, this premier reference source is ideal for government officials, industry professionals, policymakers, researchers, scholars, practitioners, academicians, instructors, and students.
Download or read book Advances in Artificial Intelligence and Soft Computing written by Grigori Sidorov and published by Springer. This book was released on 2015-11-19 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume set LNAI 9413 + LNAI 9414 constitutes the proceedings of the 14th Mexican International Conference on Artificial Intelligence, MICAI 2015, held in Cuernavaca, Morelos, Mexico, in October 2015. The total of 98 papers presented in these proceedings was carefully reviewed and selected from 297 submissions. They were organized in topical sections named: natural language processing; logic and multi-agent systems; bioinspired algorithms; neural networks; evolutionary algorithms; fuzzy logic; machine learning and data mining; natural language processing applications; educational applications; biomedical applications; image processing and computer vision; search and optimization; forecasting; and intelligent applications.
Download or read book Graduate Announcement written by University of Michigan--Dearborn and published by . This book was released on 2004 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation of Intelligent Transportation Systems written by Wael A. Altabey and published by CRC Press. This book was released on 2024-10-23 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: As transport networks become more congested, there is a growing need to adopt policies that manage demand and make full use of existing assets. Advances in information technology are now such that intelligent transportation systems (ITS) offer real potential to meet this challenge by monitoring current conditions, predicting what might happen in the future, and providing the means to manage transport proactively and on an area-wide basis. Modeling and Simulation of Intelligent Transportation Systems provides engineers, professionals, and researchers an intuitive appreciation for ITS theory, related sensor technologies, and other practical applications, including traffic management, safety, design optimization, and sustainability. Provides the theory and practical applications of Intelligent Transport Theory which will be helpful as highway construction recedes as a sustainable long-term solution. Includes several case studies that illustrate the concepts presented throughout.
Download or read book Machine Learning written by T V Geetha and published by CRC Press. This book was released on 2023-05-17 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Learning: Concepts, Techniques and Applications starts at basic conceptual level of explaining machine learning and goes on to explain the basis of machine learning algorithms. The mathematical foundations required are outlined along with their associations to machine learning. The book then goes on to describe important machine learning algorithms along with appropriate use cases. This approach enables the readers to explore the applicability of each algorithm by understanding the differences between them. A comprehensive account of various aspects of ethical machine learning has been discussed. An outline of deep learning models is also included. The use cases, self-assessments, exercises, activities, numerical problems, and projects associated with each chapter aims to concretize the understanding. Features Concepts of Machine learning from basics to algorithms to implementation Comparison of Different Machine Learning Algorithms – When to use them & Why – for Application developers and Researchers Machine Learning from an Application Perspective – General & Machine learning for Healthcare, Education, Business, Engineering Applications Ethics of machine learning including Bias, Fairness, Trust, Responsibility Basics of Deep learning, important deep learning models and applications Plenty of objective questions, Use Cases, Activity and Project based Learning Exercises The book aims to make the thinking of applications and problems in terms of machine learning possible for graduate students, researchers and professionals so that they can formulate the problems, prepare data, decide features, select appropriate machine learning algorithms and do appropriate performance evaluation.
Download or read book Recent Advances in Mechanical Engineering written by Seshadev Sahoo and published by Springer Nature. This book was released on with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Management written by Francisco Macia-Perez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forecasts point to a huge increase in energy demand over the next 25 years, with a direct and immediate impact on the exhaustion of fossil fuels, the increase in pollution levels and the global warming that will have significant consequences for all sectors of society. Irrespective of the likelihood of these predictions or what researchers in different scientific disciplines may believe or publicly say about how critical the energy situation may be on a world level, it is without doubt one of the great debates that has stirred up public interest in modern times. We should probably already be thinking about the design of a worldwide strategic plan for energy management across the planet. It would include measures to raise awareness, educate the different actors involved, develop policies, provide resources, prioritise actions and establish contingency plans. This process is complex and depends on political, social, economic and technological factors that are hard to take into account simultaneously. Then, before such a plan is formulated, studies such as those described in this book can serve to illustrate what Information and Communication Technologies have to offer in this sphere and, with luck, to create a reference to encourage investigators in the pursuit of new and better solutions.
Download or read book Deterministic Artificial Intelligence written by Timothy Sands and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kirchhoff’s laws give a mathematical description of electromechanics. Similarly, translational motion mechanics obey Newton’s laws, while rotational motion mechanics comply with Euler’s moment equations, a set of three nonlinear, coupled differential equations. Nonlinearities complicate the mathematical treatment of the seemingly simple action of rotating, and these complications lead to a robust lineage of research culminating here with a text on the ability to make rigid bodies in rotation become self-aware, and even learn. This book is meant for basic scientifically inclined readers commencing with a first chapter on the basics of stochastic artificial intelligence to bridge readers to very advanced topics of deterministic artificial intelligence, espoused in the book with applications to both electromechanics (e.g. the forced van der Pol equation) and also motion mechanics (i.e. Euler’s moment equations). The reader will learn how to bestow self-awareness and express optimal learning methods for the self-aware object (e.g. robot) that require no tuning and no interaction with humans for autonomous operation. The topics learned from reading this text will prepare students and faculty to investigate interesting problems of mechanics. It is the fondest hope of the editor and authors that readers enjoy the book.
Download or read book Advances in Artificial Intelligence written by Pietro Torasso and published by Springer Science & Business Media. This book was released on 1993-10-05 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 22 long papers and 13 short ones selected for the Scientific Track of the Third Congress of the Italian Association for Artificial Intelligence. The long papers report completed work whereas the short papers are mainly devoted to ongoing research. The papers report significant work carried out in the different subfields of artificial intelligence not only in Italy but also elsewhere: 8 of the papers come from outside Italy, with 2 from the United States and 1 eachfrom Australia, Austria, Germany, The Netherlands, Spain, and Turkey. The papers in the book are grouped into parts on: automated reasoning; cognitive models; connectionist models and subsymbolic approaches; knowledge representation and reasoning; languages, architectures and tools for AI; machine learning; natural language; planning and robotics; and reasoning about physical systems and artifacts.
Download or read book Condition Monitoring with Vibration Signals written by Hosameldin Ahmed and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoringguiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.
