Download or read book Modeling of Turbomachines for Control and Diagnostic Applications written by Igor Loboda and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new studies in the area of turbomachine mathematical modeling with a focus on models applied to developing engine control and diagnostic systems. The book contains one introductory and four main chapters. The introductory chapter describes the area of modeling of gas and wind turbines and shows the demand for further improvement of the models. The first three main chapters offer particular improvements in gas turbine modeling. First, a novel methodology for the modeling of engine starting is presented. Second, a thorough theoretical comparative analysis is performed for the models of engine internal gas capacities, and practical recommendations are given on model applications, in particular for engine control purposes. Third, multiple algorithms for calculating important unmeasured parameters for engine diagnostics are proposed and compared. It is proven that the best algorithms allow accurate prognosis of engine remaining lifetime.The field of wind turbine modeling is presented in the last main chapter. It introduces a general-purpose model that describes both aerodynamic and electric parts of a wind power plant. Such a detailed physics-based model will help with the development of more accurate control and diagnostic systems.In this way, this book includes four new studies in the area of gas and wind turbine modeling. These studies will be interesting and useful for specialists in turbine engine control and diagnostics.
Download or read book A Generic Modeling Procedure for Turbomachines for Transient Analysis and Control Design written by Kevin Michael Murphy and published by . This book was released on 1995 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2003-05-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.
Download or read book Control oriented High Frequency Turbomachinery Modeling written by O. O. Badmus and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System Modeling and Control Studies of Flutter in Turbomachinery written by Maverick Teck Ming Wong and published by . This book was released on 1997 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Turbomachinery written by R. K. Turton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text outlines the fluid and thermodynamic principles that apply to all classes of turbomachines, and the material has been presented in a unified way. The approach has been used with successive groups of final year mechanical engineering students, who have helped with the development of the ideas outlined. As with these students, the reader is assumed to have a basic understanding of fluid mechanics and thermodynamics. However, the early chapters combine the relevant material with some new concepts, and provide basic reading references. Two related objectives have defined the scope of the treatment. The first is to provide a general treatment of the common forms of turbo machine, covering basic fluid dynamics and thermodynamics of flow through passages and over surfaces, with a brief derivation of the fundamental governing equations. The second objective is to apply this material to the various machines in enough detail to allow the major design and performance factors to be appreciated. Both objectives have been met by grouping the machines by flow path rather than by application, thus allowing an appreciation of points of similarity or difference in approach. No attempt has been made to cover detailed points of design or stressing, though the cited references and the body of information from which they have been taken give this sort of information. The first four chapters introduce the fundamental relations, and the suc ceeding chapters deal with applications to the various flow paths.
Download or read book Handbook of Smart Energy Systems written by Michel Fathi and published by Springer Nature. This book was released on 2023-08-04 with total page 3382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook analyzes and develops methods and models to optimize solutions for energy access (for industry and the general world population alike) in terms of reliability and sustainability. With a focus on improving the performance of energy systems, it brings together state-of-the-art research on reliability enhancement, intelligent development, simulation and optimization, as well as sustainable development of energy systems. It helps energy stakeholders and professionals learn the methodologies needed to improve the reliability of energy supply-and-demand systems, achieve more efficient long-term operations, deal with uncertainties in energy systems, and reduce energy emissions. Highlighting novel models and their applications from leading experts in this important area, this book will appeal to researchers, students, and engineers in the various domains of smart energy systems and encourage them to pursue research and development in this exciting and highly relevant field.
Download or read book Incompressible Flow Turbomachines written by G.F. Round and published by Butterworth-Heinemann. This book was released on 2004-06-15 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historical Background and Present State of Development; Theory of Turbo Machines; Turbines; Pumps; Some Aspects of Design; Blades of Single and Double Curvature; Inlet Elements & Outlet Elements; Head Losses in Components of Turbine and Pump Systems; Cavitation; Water Hammer; Corrosion; References; Appendices.
Download or read book Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2013-12-19 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This entirely updated and enlarged Second Edition broadens the scope of the previous edition while maintaining its concise, easy-to-read style in presenting the basic principles of turbomachine theory and its application to specific devices -- providing immediately useful step-by-step procedures that show how the essentials of turbomachinery are a
Download or read book Filter Design for System Modeling State Estimation and Fault Diagnosis written by Ziyun Wang and published by CRC Press. This book was released on 2022-11-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filter Design for System Modeling, State Estimation and Fault Diagnosis analyzes the latest methods in the design of filters for system modeling, state estimation and fault detection with the intention of providing a new perspective of both theoretical and practical aspects. This book also includes fault diagnosis techniques for unknown but bounded systems, their real applications on modeling and fault diagnosis for lithium battery systems, DC-DC converters and spring damping systems. It proposes new methods based on zonotopic Kalman filtering, a variety of state estimation methods of zonotope and its derived algorithms, a state estimation method based on convex space, set inversion interval observer filtering-based guaranteed fault estimation and a novel interval observer filtering-based fault diagnosis. The methods presented in this text are more practical than the common probabilistic-based algorithms, since these can be applied in unknown but bounded noisy environments. This book will be an essential read for students, scholars and engineering professionals who are interested in filter design, system modeling, state estimation, fault diagnosis and related fields.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by Routledge. This book was released on 2017-10-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Fundamentals of Turbomachines written by Erik Dick and published by Springer Nature. This book was released on 2022-02-24 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores the working principles of all kinds of turbomachines. The same theoretical framework is used to analyze the different machine types. The order in which the different kinds are treated is chosen by the possibility of gradually building up theoretical concepts. For each of the turbomachine kinds, a balance is sought between fundamental understanding and knowledge of practical aspects. Readers are invited through challenging exercises to consider how the theory applies to particular cases. This textbook appeals to senior undergraduate and graduate students in mechanical engineering and to professional engineers seeking to understand the operation of turbomachines. Readers will gain a fundamental understanding of turbomachines and will be able to make a reasoned choice of a turbomachine for a particular application.
Download or read book Advances in Diagnostics of Processes and Systems written by Józef Korbicz and published by Springer Nature. This book was released on 2020-12-12 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of 13 carefully selected papers contributed by researches in technical and partial medical diagnostics as well as fault-tolerant control and constitutes a comprehensive study of the field. Nowadays technical diagnostics and fault-tolerant control are a field of intensive scientific research that covers well-established topics along with emerging developments in control engineering, artificial intelligence, applied mathematics and statistics. At the same time, a growing number of applications of different fault diagnosis methods, especially in the electrical, mechanical, chemical and medical areas, are being observed. The aim of the book is to show the bridge between technical and medical diagnosis based on analytical and artificial intelligence methods and techniques. The book is divided into three parts: I. Fault-Tolerant Control and Reconfiguration, II. Fault Diagnosis of Processes and Systems, III. Medical Applications. The book is of interest to scientists, engineers and academics dealing with the problems of designing technical diagnosis and fault-tolerant control systems. Its target readers are also junior researchers and students of control, artificial intelligence and computer engineering.
Download or read book Turbomachinery written by Marco Gambini and published by Springer Nature. This book was released on 2020-09-17 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of preliminary sizing procedures for turbomachinery. Applicable to both conventional and non-conventional fluids, these procedures enable users to optimize the kinematics, thermodynamics and geometry of the turbomachinery (in the preliminary design phase) using geometric correlations and losses models; to accurately predict the efficiency of turbomachinery – in most cases, in excellent agreement with CFD calculations; and to consistently analyze all turbomachines (axial and radial turbines, axial and centrifugal compressors, centrifugal pumps). The book is intended for bachelor's and master's students in industrial, mechanical and energy engineering, as well as researchers and professionals in the energy systems and turbomachinery sectors, guiding them step by step through the first sizing of turbomachines and the verification of the technological feasibility of turbomachines designed for new conversion systems operating with unconventional fluids.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by Routledge. This book was released on 2017-10-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Turbochargers and Turbocharging written by Evangelos G. Giakoumis and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.
Download or read book Development of Novel Turbulence Modeling Techniques for Turbomachinery Applications written by Dibbon Keith Walters and published by . This book was released on 2000 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
