Download or read book Modeling of Magnetoelectric Effects in Composites written by Mirza Bichurin and published by Springer. This book was released on 2014-06-11 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together numerous contributions to the field of magnetoelectric (ME) composites that have been reported so far. Theoretical models of ME coupling in composites relate to the wide frequency range: from low-frequency to microwave ones and are based on simultaneous solving the elastostatic/elastodynamic and electrodynamics equations. Suggested models enable one to optimize magnetoelectric parameters of a composite. The authors hope to provide some assimilation of facts into establish knowledge for readers new to the field, so that the potential of the field can be made transparent to new generations of talent to advance the subject matter.
Download or read book Magnetoelectric Composites written by Mirza I. Bichurin and published by CRC Press. This book was released on 2019-02-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to modeling and application of magnetoelectric (ME) effects in layered and bulk composites based on magnetostrictive and piezoelectric materials. Currently, numerous theoretical and experimental studies on ME composites are available but few on the development and research of instruments based on them. So far, only investigation of ME magnetic field sensors has been cited in the existing literature. However, these studies have finally resulted in the creation of low-frequency ME magnetic field sensors with parameters substantially exceeding the characteristics of Hall sensors. The book presents the authors’ many years of experience gained in ME composites and through creation of device models based on their studies. It describes low-frequency ME devices, such as current and position sensors and energy harvesters, and microwave ME devices, such as antennas, attenuators, filters, gyrators, and phase shifters.
Download or read book Modeling of Magnetoelectric Effects in Composites written by Mirza Bichurin and published by . This book was released on 2014-06-30 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Magnetoelectrics written by Nian Sun and published by Elsevier. This book was released on 2015-05-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Magnetoelectrics: Materials, Structures, and Applications gives the reader a summary of the theory behind magnetoelectric phenomena, later introducing magnetoelectric materials and structures and the techniques used to fabricate and characterize them. Part two of the book looks at magnetoelectric devices. Applications include magnetic and current sensors, transducers for energy harvesting, microwave and millimeter wave devices, miniature antennas and medical imaging. The final chapter discusses progress towards magnetoelectric memory. - Summarises clearly the theory behind magnetoelectric phenomena - Strong coverage of fabrication and characterisation techniques - Reviews a broad range of current and potential magnetoelectric devices
Download or read book Magnetoelectricity in Composites written by Mirza Bichurin and published by CRC Press. This book was released on 2011-11-11 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together numerous contributions to the field of magnetoelectric (ME) composites that have been reported since the beginning of the new millennium. It presents assimilation of facts into the established knowledge, so that the potential of the field can be made transparent to the new generations of talent to advance the subject matter. This book discusses these bulk and nanostructured magnetoelectric composites from both experimental and theoretical perspectives. From application viewpoint, microwave devices, sensors, transducers, and heterogeneous read/write devices are among the suggested technical implementations of magnetoelectric composites.
Download or read book Multiscale Modeling of Heterogeneous Structures written by Jurica Sorić and published by Springer. This book was released on 2017-11-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of multiscale approaches and homogenization procedures as well as damage evaluation and crack initiation, and addresses recent advances in the analysis and discretization of heterogeneous materials. It also highlights the state of the art in this research area with respect to different computational methods, software development and applications to engineering structures. The first part focuses on defects in composite materials including their numerical and experimental investigations; elastic as well as elastoplastic constitutive models are considered, where the modeling has been performed at macro- and micro levels. The second part is devoted to novel computational schemes applied on different scales and discusses the validation of numerical results. The third part discusses gradient enhanced modeling, in particular quasi-brittle and ductile damage, using the gradient enhanced approach. The final part addresses thermoplasticity, solid-liquid mixtures and ferroelectric models. The contents are based on the international workshop “Multiscale Modeling of Heterogeneous Structures” (MUMO 2016), held in Dubrovnik, Croatia in September 2016.
Download or read book Nonlinear Homogenization and Its Applications to Composites Polycrystals and Smart Materials written by P. Ponte Castaneda and published by Springer Science & Business Media. This book was released on 2004-09-15 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although several books and conference proceedings have already appeared dealing with either the mathematical aspects or applications of homogenization theory, there seems to be no comprehensive volume dealing with both aspects. The present volume is meant to fill this gap, at least partially, and deals with recent developments in nonlinear homogenization emphasizing applications of current interest. It contains thirteen key lectures presented at the NATO Advanced Workshop on Nonlinear Homogenization and Its Applications to Composites, Polycrystals and Smart Materials. The list of thirty one contributed papers is also appended. The key lectures cover both fundamental, mathematical aspects of homogenization, including nonconvex and stochastic problems, as well as several applications in micromechanics, thin films, smart materials, and structural and topology optimization. One lecture deals with a topic important for nanomaterials: the passage from discrete to continuum problems by using nonlinear homogenization methods. Some papers reveal the role of parameterized or Young measures in description of microstructures and in optimal design. Other papers deal with recently developed methods – both analytical and computational – for estimating the effective behavior and field fluctuations in composites and polycrystals with nonlinear constitutive behavior. All in all, the volume offers a cross-section of current activity in nonlinear homogenization including a broad range of physical and engineering applications. The careful reader will be able to identify challenging open problems in this still evolving field. For instance, there is the need to improve bounding techniques for nonconvex problems, as well as for solving geometrically nonlinear optimum shape-design problems, using relaxation and homogenization methods.
Download or read book Magnetoelectric Interaction Phenomena in Crystals written by Manfred Fiebig and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest for higher data density in information technology manipulation of magnetization by other means than magnetic fields has become an important challenge. This lead to a startling revival of the magnetoelectric effect, which characterizes induction of a polarization by a magnetic field or of a magnetization by an electric field. The magnetoelectric crosslink of material properties opens just those degrees of freedom which are needed for the mutual control of magnetic and electric states. The book gives a state-of-the-art review on magnetoelectrics research, classifies current research tendencies, and points out possible future trends. Novel compounds and growth techniques and new theoretical concepts for the understanding of magnetoelectric coupling phenomena are introduced. Highlights are the discovery of "gigantic" magnetoelectric effects which are strong enough to trigger electric or magnetic phase transitions; the concept of magnetochirality; and development "structural" magnetoelectric effects in artificial multiphase compounds. The book is addressed to condensed-matter physicists with a particular focus on experts in highly correlated systems.
Download or read book Ferroic Functional Materials written by Jörg Schröder and published by Springer. This book was released on 2017-11-23 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers experiments and theory in the fields of ferroelectrics, ferromagnets, ferroelastics, and multiferroics. Topics include experimental preparation and characterization of magnetoelectric multiferroics, the modeling of ferroelectric and ferromagnetic materials, the formation of ferroic microstructures and their continuum-mechanical modeling, computational homogenization, and the algorithmic treatment in the framework of numerical solution strategies.
Download or read book Advanced Functional Materials written by Yafang Han and published by Springer. This book was released on 2018-04-19 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of metamaterials and multifunctional composites, multiferroic materials, amorphous and high-entropy alloys, advanced glass materials and devices, advanced optoelectronic and microelectronic materials, biomaterials, deformation behavior and flow units in metastable materials, advanced fibers and nano-composites, polymer materials, and nanoporous metal materials. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.
Download or read book Hybrid and Hierarchical Composite Materials written by Chang-Soo Kim and published by Springer. This book was released on 2015-04-08 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous and detailed examples and over 150 illustrations. In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the characterization of ferroelectric materials, including structural, electrical and multiphysic aspects, as well as innovative techniques for modeling and predicting the performance of these devices using phenomenological approaches and nonlinear methods. Hence, the aim of this book is to provide an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric system characterization and modeling, allowing a deep understanding of ferroelectricity.
Download or read book Magnetoelectric Polymer Based Composites written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Download or read book Nanostructures and Thin Films for Multifunctional Applications written by Ion Tiginyanu and published by Springer. This book was released on 2016-04-02 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on recent advances in the development of thin films for photovoltaic applications, TiO2/WO3 bi-layers for applications with enhanced photo-catalytic properties, nanometer oxide and hydroxide films for anticorrosive coatings, surface passivation in chemical industries, micro- and nanoelectronics, trilayers of metglas and lead free piezoelectrics for magnetic field sensors, current sensors, spintronics, microwave and read/write devices. Diluted ferromagnetic alloy films are also considered for superconducting spintronics based on superconducting spin-valves. Thermal properties of segmented nanowires are analyzed with respect to thermoelectric applications. Recent advances in template production of nanocomposites are also reviewed with particular focus on technologies for template assisted formation of metal nanotubes. Some elements related to abrasive flow machining (AFM), specifically state of the art elements of technological systems and construction of equipment are presented. The book is written for researchers in materials science, nanotechnologies, PhD students and graduate student.
Download or read book Issues in General Physics Research 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 1177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in General Physics Research / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Physics Research. The editors have built Issues in General Physics Research: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Physics Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in General Physics Research: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Sixth International Conference on Nonlinear Mechanics ICNM 6 written by Zhe-wei Zhou and published by DEStech Publications, Inc. This book was released on 2013-08-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel mathematical and modeling approaches to problems in graded materials, biological materials, fluid mechanics and more Covers nanomechanics, multi-scale modeling, interface mechanics and microstructure This series volume contains 128 not previously published research presentations on using nonlinear mechanics to understand and model a wide variety of materials, including polymers, metals and composites, as well as subcellular and cellular tissues. Focus is on numerical and physics approaches to representing multiscale relationships within complex solids and fluids systems, with applications in materials science, energy storage, medical diagnostics and treatment, and biotechnology. TABLE OF CONTENTS Preface Committees SESSION 1: INVITED LECTURES Micro-Macro Analysis of Creep and Damage Behavior of Multi-Pass Welds Some New Developments in Non-Linear Solid Mechanics Design of Material Systems: Mathematics and Physics of the Archetype-Genome Exemplar Criticism of Generally Accepted Fundamentals and Methodologies of Traffic and Transportation Theory SESSION 2: NONLINEAR CONTINUUM MECHANICS Geometrically Nonlinear Analysis of Simple Plane Frames of Functionally Graded Materials Thermal Post-Buckling of FG Circular Plates Under Transversely Point-Space Constraint Tunability of Longitudinal Wave Band Gap in One Dimensional Magneto-Elastic Phononic Crystal Teaching Nonlinear Mechanics at the Undergraduate and Graduate Level—Two Examples Geometrically Nonlinear FE Instability Simulations of Hinged Composite Laminated Cylindrical Shells Constitutive Relation of Martensitic Transformation in CuAlNi Based on Atomistic Simulations Soft Behaviors of Beam Shaped Liquid Crystal Elastomers Under Light Actuations XFEM Based Discontinuity Simulation for Saturated Soil Numerical Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEM Finite Deformation for Everted Compressible Hypereleastic Cylindrical Tubes Modelling and Non-Linear Free Vibrations of Cable-Stayed Beam Wavelet Solution of a Class of Nonlinear Boundary Value Problems Axial Compression of a Rectangular Rubber Ring Composed of an Incompressible Mooney-Rivlin Material Influence of Concentration-Dependent Elastic Modulus and Charge or Discharge Rate on Tensile Stress in Anode An Integral Equation Approach to the Fully Nonlinear Fluid Flow Problem in an Infinite Channel Over Arbitrary Bottom Topography Analysis of Nonlinear Dynamical Characteristics for Thermoelastic Half-Plane with Voids Tensor Model for Dynamic Damage of Ductile Metals Over a Wide Range of Strain Rates SESSION 3: MULTI-SCALE MECHANICS AND MULTI-PHYSICS MODELING The Nonlinear Magnetoelectric Effect of Layered Magnetoelectric Composite Cylinder with an Imperfect Interface A Solution for Nonlinear Poisson-Neumann Problem of Nb3Sn Superconducting Transport Current Temperature Effect on the Tensile Mechanical Properties of Graphene Nanoribbons Square Inclusion with a Nonlinear Eigenstrain in an Anisotropic Piezoelectric Full Plane Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements Mechanics of Semiflexible Polymer Chains Under Confinements Study on the Solution of Reynolds Equation for Micro Gas Bearings Using the Alternating-Direction Implication Algorithm Atomistic Study of Li Concentration Dependence of the Mechanical Properties of Graphite Anode in Li-ion Battery 3D Extrusion Simulation of the Single Screw Head and Optimization Design Buckling Behavior of Defective Carbon Nanotubes Elastic Properties of Single-Stranded DNA Biofilm with Strong Interactions Analysis on Thickness Dependence of Jc Caused by Dislocations and Grain Boundaries in YBCO Superconducting Films Operating Strain Response in CICC Coils Through Nonlinear Finite Element Modeling Dynamics Analysis of a Multi-Degree-of-Freedom Electro-Hydraulic Mix-Drive Motion Simulator by KANE Equation Multiscale 3D Fracture Simulation Integrating Tomographic Characterization Research into Compressive Mechanical Properties of Special Piezomagnetic Material Sheets A Numerical Study on Detonation Wave Propagation Using High-Precision and High-Resolution Schemes SESSION 4: STRUCTURAL DYNAMIC AND STRUCTURE-FLUID INTERACTIONS A Study on Pure IL VIV of a Marine Riser in Shear Current Parametric Studies on Nonlinear Flutter of High-Aspect-Ratio Flexible Wings Model Reduction of a Flexible Beam Rotating at High Speed Considering Dynamic Stiffening Vibration Modal Analysis of Cantilever Beams with Complicated Elasticity Boundary Constraint Numerical Simulation of Ahmed Model in Consideration of the FSI Effect Aerodynamic Damping of a Hammerhead Launch Vehicle in Transonic Flow Symmetry Reductions and Explicit Solutions of (3 + 1)-Dimensional Kadomtsev-Petviashvili (KP) Equation Nonlinear Behaviors of an Isotropic Incompressible Hyperelastic Spherical Membrane Under Different Dynamic Loads Creep Buckling of Viscoelastic Plate Consdering Higher Order Modes SESSION 5: COMPLEX FLUID FLOW AND NONLINEAR STABILITY Homotopy Analysis of Korteweg-de Vries Equation with Time Delay Homotopy Analysis Method for Bubble Pulsation Equation with Nonlinear Term of Fractional Power Chebyshev Finite Spectral Method for Boussinesq-Type Equations on Staggered Grids Twin Jets in Crossflow Application of Fixed Point Method to Obtain a Semi-Analytical Solution of Stagnation Flow On the Nonlinear Stability of Laminar Flow Between Parallel Planes Boundary Treatments in Lattice Boltzmann Method A Lattice Boltzmann Based Immersed Boundary Method for Fluid-Structure Interaction Numerical Solutions of Convection-Diffusion Equations by Hybrid Discontinuous Galerkin Methods Steady-State Solutions of the Wave-Bottom Resonant Interaction Lattice Boltzmann Simulation of the Shock Damping and the Shock Increased by Means of Lorentz Force Analysis of the Effects of Nonlinear Characteristics of Lag Dampers on Helicopter Ground Resonance Flow Structures and Sound Radiation in Supersonic Mixing Layers with Nonlinear PSE Method Turbulent Structures in Subsonic Jet Flow Forced by Random Disturbances Exponential p-Stability for a Delayed Recurrent Neural Networks with Impulses Spatial Variation of Scaling Exponents for Structure Functions in a Decaying Turbulence SESSION 6: NONLINEAR DYNAMIC OF STRUCTURE Analysis of Chaos Behavior of Single Mode Vibration of Cable-Stayed Chaotification of Fractional Maps Nonlinear Finite Element Analysis of the Dynamic Axial Crushing of Empty Hexagonal Tube Active Control of a Nonlinear Aeroelastic System Using the Receptance Method Dynamics Analysis of the FHN Neuronal Model Analyzing the Effect of the Axial Force to the Natural Frequencies of Arch Stable Periodic Response of One-Way Clutches in a Two-Pulley Belt-Drive Model Supercritical Nonlinear Dynamics of an Axially Moving Viscoelastic Beam with Speed Fluctuation Nonlinear Dynamic Response to a Moving Force of Timoshenko Beams Resting on Pasternak Foundations An Improved Method for the Construction of Nonlinear Operator in Homotopy Analysis Method A Nonlinear Integration Scheme for Evolutionary Differential Equations A Comparative Study of Civil Aircraft Crashworthiness with Different Ground Conditions Improved Dynamic Analysis of Development of Pulmonary Edema The Timescale Function Method for Solving Free Vibration of Nonlinear Oscillator Nonlinear Aeroelastic Analysis of Flexible Wings with High-Aspect-Ratio Considering Large Deflection Differential Quadrature Method for Vibration Analysis of Finite Beams on Nonlinear Viscoelastic Foundations Numerical Simulation on the Strength and Sealing Performance for High-Pressure Isolating Flange Nonlinear Dynamical Stability of the Lattices with Initial Material and Geometric Imperfection Nonlinear Vibration of Symmetric Angle-Ply Laminated Piezoelectric Plates with Linearly Varying Thickness An Exact Free Vibration Frequency Formula for Oscillator with Single-Term Positive-Power Restoring Force An Exact Solution of Synchronization State for a Class of Networked Mass-Spring-Damper Oscillator Systems SESSION 7: INTERFACE MECHANICS AND ENGINEERING APPLICATION Numerical Simulation of Free Surface Collapse in Propellant Tank Restudy on the Adaptive Mesh Technique for Seepage Problems High-Order Series Solutions of Wave and Current Interactions Deformation and Stress Distribution of Arterial Walls of the Aged A p53-Mdm2 Dynamical Model Induced by Laminar Shear Stress in Endothelial Cells Optimized Image Processing Based on CUDA in a Combined Measurement Technique of PIV and Shadowgraph 3D Visualization of the Flow Fields Using Digital In-Line Holography Analysis and Experimental Study on Air Foam Flooding Seepage Flow Mechanics Experimental Measurements for Mechanical and Electrical Conductive Properties of CNT Bundles Analysis on Dynamic Response of Bedding Rock Slope with Bolts under Earthquakes Numerical Prediction of Aerodynamic Noise Radiated from High Speed Train Pantograph Effects of Length on Aerodynamics of High Speed Train Models Free Convection Nanofluid Flow in the Stagnation-Point Region of a Three Dimensional Body Vertical Distribution and Dynamic Release Characteristics of Pollutants from Resuspended Sediment Numerical Simulation of the Contaminant Release Through the Sediment-Overlying Water Interface Analysis on the Aerodynamic and Aero-Noise of MIRA Model Radial Squeeze Force of MR Fluid Between Two Cylinders Nonlinear Buckling Analysis and Ultimate Extended Capacity Research of Downhole Pipe Strings in Ultra-Deep Horizontal Wells A Novel Method of Generating Nonlinear Internal Wave in a Stratified Fluid Tank and Its Theoretical Model SESSION 8: MINI-SYMPOSIUM ON TRAFFIC FLUID Study on Correlation Analysis of Synchronized Flow in the Kerner-Klenov-Wolf Cellular Automation Model Numerical Simulation of Traffic Flow in the Rain or Snow Weather Condition First Order Phase Transitions in the Brake Light Cellular Automation Model Within the Fundamental Diagram Approach The Leader-Follower Winding Behavior of Pedestrians in a Queue Effect of Overpasses in Two-Dimensional Traffic Flow Model with Random Update Rule Analysis of the Density Wave in a New Continuum Model The Phenomenon of High-Speed-Car-Following on Chinese Highways A Lattice Hydrodynamic Model Considering the Difference of Density and its Analysis Experimental Feature of Car-Following Behaviors in a Platoon of 25 Vehicles Car-Following Model for Manual Transmission Vehicles The Mechanism of Synchronized Flow in Traffic Flow Modeling An Asymmetric Stochastic Car-Following Model Based on Extended Tau Theory A Gaussian Distribution Based Dual-Cognition Driver Behavior Model at Cross Traffic A New Traffic Kinetic Model Considering Potential Influence The Effect of Marks on the Pedestrian Evacuation Equilibrium Velocity Distribution Function for Traffic Flow Effects of Antilock Braking System on Driving Behavior Under Emergent Stability Analysis of Pedestrian Flow in Two-Dimensional Optimal Velocity Model with Asymmetric Interaction Simulation-Based Stability Analysis of Car-Following Models Under Heterogeneous Traffic Crossing Speed of Pedestrian at an Unsignalized Intersection Modeling Mixed Traffic Flow at a Crosswalk with Push Button Effects of Game Strategy Update on Pedestrian Evacuation in a Hall Study on Long-Term Correlation of CO and CO2 from Vehicle Emissions on Roadsides with the Detrended Fluctuation Analysis Method Bottleneck Effect on a Bidirectional Two-Lane Mixed Traffic Flow
Download or read book Theoretical Models and Experimental Approaches in Physical Chemistry written by A. K. Haghi and published by CRC Press. This book was released on 2018-10-01 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume presents an up-to-date review of modern materials and physical chemistry concepts, issues, and recent advances in the field. It presents a modern theoretical and experimental approach in applied physical chemistry. The volume discusses the developments of advanced chemical products and respective tools to characterize and predict the chemical material properties and behavior. With chapters from distinguished scientists and engineers from key institutions worldwide, the volume provides understanding through numerous examples and practical applications drawn from research and development chemistry. It emphasizes the intersection of chemistry, math, physics, and the resulting applications across many disciplines of science and explores applied physical chemistry principles in specific areas. At the same time, each topic is framed within the context of a broader more interdisciplinary approach, demonstrating its relationship and interconnectedness to other areas. This new book fills a gap within modeling texts, focusing on applications across a broad range of disciplines, and presents information on many important problems in physical chemistry. These investigations are accompanied by real-life applications in practice.