Download or read book Modeling of Inelastic Behavior of RC Structures Under Seismic Loads written by P. Benson Shing and published by ASCE Publications. This book was released on 2001-01-01 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the U.S.?Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in Tokyo and Lake Yamanaka, Japan, October 25-29, 1999. Sponsored by the National Science Foundation, U.S.A.; Japan Society for the Promotion of Science; Japan Concrete Institute. This collection presents the latest ideas and findings on the inelastic behavior of reinforced concrete (RC) structures from the analysis and design standpoints. These papers discuss state-of-the-art concrete material models and analysis methods that can be used to simulate and understand the inelastic behavior of RC structures, as well as design issues that can improve the seismic performance of these structures. Topics include modeling of concrete behavior; modeling of RC structures (finite element approach and macro-element approach); and experimental studies, analysis, and design issues.
Download or read book Modeling of Inelastic Behavior of RC Structures Under Seismic Loads written by Pui-shum B. Shing and published by Amer Society of Civil Engineers. This book was released on 2001-01-01 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of technical papers, presenting the ideas and findings on the inelastic behavior of reinforced concrete structures from the analysis and design standpoints. These papers include the concrete material models and analysis methods that can be used to simulate and understand the inelastic behavior of reinforced concrete structures.
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 3395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials). Some contributions present the latest insights and new understanding on (i) the mechanics of structures and systems (dynamics, vibration, seismic response, instability, buckling, soil-structure interaction), and (ii) the mechanics of materials and fluids (elasticity, plasticity, fluid-structure interaction, flow through porous media, biomechanics, fracture, fatigue, bond, creep, shrinkage). Other contributions report on (iii) recent advances in computational modelling and testing (numerical simulations, finite-element modeling, experimental testing), and (iv) developments and innovations in structural engineering (planning, analysis, design, construction, assembly, maintenance, repair and retrofitting of structures). Insights and Innovations in Structural Engineering, Mechanics and Computation is particularly of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find the content useful. Short versions of the papers, intended to be concise but self-contained summaries of the full papers, are collected in the book, while the full versions of the papers are on the accompanying CD.
Download or read book Inelastic Modeling and Analyses of a RC Building Subjected to Earthquake Loads written by Devanshu Kant and published by . This book was released on 1999 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2018-01-31 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. Computational Modelling of Concrete Structures reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. The contributions cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: Multi-scale cement and concrete research: experiments and modelling Aging concrete: from very early ages to decades-long durability Advances in material modelling of plain concrete Analysis of reinforced concrete structures Steel-concrete interaction, fibre-reinforced concrete, and masonry Dynamic behaviour: from seismic retrofit to impact simulation Computational Modelling of Concrete Structures is of special interest to academics and researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.
Download or read book Computational Methods Seismic Protection Hybrid Testing and Resilience in Earthquake Engineering written by Gian Paolo Cimellaro and published by Springer. This book was released on 2014-09-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a tribute to the research contribution of Professor Andrei Reinhorn in the field of earthquake engineering. It covers all the aspects connected to earthquake engineering starting from computational methods, hybrid testing and control, resilience and seismic protection which have been the main research topics in the field of earthquake engineering in the last 30 years. These were all investigated by Prof. Reinhorn throughout his career. The book provides the most recent advancements in these four different fields, including contributions coming from six different countries giving an international outlook to the topics.
Download or read book Computational Modelling of Concrete and Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2022-05-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.
Download or read book An Experimental and Theoretical Investigation of the Inelastic Behavior of Reinforced Concrete Multistory Frame Models Subjected to Simulated Seismic Load written by Mohamed Asadul Huque Chowdhury and published by . This book was released on 1977 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and
Download or read book Single Skin and Double Skin Concrete Filled Tubular Structures written by Mohamed Elchalakani and published by Woodhead Publishing. This book was released on 2021-12-03 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-concrete composite structures, including concrete-filled steel tubular (CFST) structures and concrete-filled double skin steel tubular (CFDST) structures, have seen a significant increase in use in the modern construction industry due to their superior structural performance compared to conventional steel bare sections and reinforced concrete (RC) structures. Single Skin and Double Skin Concrete Filled Tubular Structures presents state-of-the-art in CFST and CFDST structures and their performance under various static loading conditions. The book establishes a foundation for understanding the structural performance of composite structures by discussing the behavior of CFST and CFDST structures based on experimental and finite element (FE) investigations. Besides, numerical and analytical methods for investigating the behavior of CFST and CFDST structures are presented in detail. The title offers many design examples following international design codes, including North American design guidelines ANSI-AISC 360, European design regulations Eurocode 4, and Australian design code AS 5100. The title can be used for the practical use of civil engineers and as a resource for further research. Provides up-to-date advances on single-skin and double-skin constructions Explains and illustrates the structural performance of columns, beams, and beam-columns Discusses failure mechanism and gives detailed photographic references Presents analytical and numerical investigations for the behavior of single-skin and double-skin constructions Offers design examples following North American, European, and Australian codes
Download or read book Finite Elements in Civil Engineering Applications written by Max.A.N. Hendriks and published by CRC Press. This book was released on 2021-06-24 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present high-level research in structural engineering, concrete mechanics and quasi-brittle materials, including the prime concern of durability requirements and earthquake resistance of structures.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book 1st fib Congress in Osaka Japan Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2002-01-01 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior and analysis of reinforced concrete structures under alternate actions inducing inelastic response written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RC Frames Under Earthquake Loading written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1996 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the behaviour of individual frame members subjected to the cyclic actions arising in seismically loaded frames i.e. slender flexure-dominated beams, short columns and beam-column joints. The report also considers global inelastic frame behaviour and its modelling, and the peculiarities of the behaviour of masonry-filled frames.
Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.
Download or read book Seismic design of reinforced concrete structures for controlled inelastic response design concepts written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1997-03-01 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: