Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.
Download or read book Modeling Damage Fatigue and Failure of Composite Materials written by Ramesh Talreja and published by Elsevier. This book was released on 2023-09-23 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Damage, Fatigue and Failure of Composite Materials, Second Edition provides the latest research in the field of composite materials, an area that has attracted a wealth of research, with significant interest in the areas of damage, fatigue, and failure. The book is fully updated, and is a comprehensive source of physics-based models for the analysis of progressive and critical failure phenomena in composite materials. It focuses on materials modeling while also reviewing treatments for analyzing failure in composite structures. Sections review damage development in composite materials such as generic damage and damage accumulation in textile composites and under multiaxial loading. Part Two focuses on the modeling of failure mechanisms in composite materials, with attention given to fiber/matrix cracking and debonding, compression failure, and delamination fracture. Final sections examine the modeling of damage and materials response in composite materials, including micro-level and multi-scale approaches, the failure analysis of composite materials and joints, and the applications of predictive failure models. - Provides a comprehensive source of physics-based models for the analysis of progressive and critical failure phenomena in composite materials - Assesses failure and life prediction in composite materials - Discusses the applications of predictive failure models such as computational approaches to failure analysis - Covers further developments in computational analyses and experimental techniques, along with new applications in aerospace, automotive, and energy (wind turbine blades) fields - Covers delamination and thermoplastic-based composites
Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. - Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures - Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading - Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications - Addresses new topics and covers contemporary research developments in the field
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. - Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites - Puts a specific focus on viscoelastic and viscoplastic modeling - Features the time-temperature-age superposition principle for predicting long-term response - Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book Fatigue in Composites written by Bryan Harris and published by Woodhead Publishing. This book was released on 2003-10-31 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of work on the fatigue behavior of composites dealing with the problems met with by materials scientists and designers in aerospace, automotive, marine, and structural engineering. Including a historical review, standards, micromechanical aspects, life-prediction methods for constant stress and variable stress, and fatigue in practical situations.
Download or read book Mechanics of Composite Hybrid and Multifunctional Materials Fracture Fatigue Failure and Damage Evolution Volume 3 written by Vijay Chalivendra and published by Springer Nature. This book was released on 2022-01-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Composite, Hybrid, and Multifunctional Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 3 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of four from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled Constituent Composites Damage Detection Advanced Imaging of Composites Multifunctional Materials Composite Interfaces Tunable Composites Novel Experimental Methods Extreme Environments Interfacial Fracture Integration of Models & Experiments Mechanics of Energy & Energetic Materials Integration of Models & Experiments In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior
Download or read book Modeling the Effect of Damage in Composite Structures written by Christos Kassapoglou and published by John Wiley & Sons. This book was released on 2015-05-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers new and existing methods for the design and analysis of composites structures with damage present Provides efficient and accurate approaches for analysing structures with holes and impact damage Introduces a new methodology for fatigue analysis of composites Provides design guidelines, and step by step descriptions of how to apply the methods, along with evaluation of their accuracy and applicability Includes problems and exercises Accompanied by a website hosting lecture slides and solutions
Download or read book Fatigue of Composite Materials written by K.L. Reifsnider and published by Elsevier. This book was released on 2012-12-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first comprehensive review of its kind on the long-term behaviour of composite materials and structures subjected to time variable mechanical, thermal, and chemical influences, a subject of critical importance to the design, development, and certification of high performance engineering structures. Specific topics examined include damage, damage characterization, and damage mechanics; fatigue testing and evaluation; fatigue behaviour of short and long fibre reinforced polymer and metal matrix materials; viscoelastic and moisture effects; delamination; statistical considerations; the modeling of cumulative damage development; and life prediction. The volume provides an extensive presentation of data, discussions, and comparisons on the behaviour of the major types of material systems in current use, as well as extensive analysis and modeling (including the first presentation of work not found elsewhere). The book will be of special interest to engineers concerned with reliability, maintainability, safety, certification, and damage tolerance; to materials developers concerned with making materials for long-term service, especially under severe loads and environments, and to lecturers, students, and researchers involved in material system design, performance, solid mechanics, fatigue, durability, and composite materials. The scope of the work extends from entry level material to the frontiers of the subject.
Download or read book Fatigue Behaviour of Fiber Reinforced Polymers written by Yao Weixing and published by DEStech Publications, Inc. This book was released on 2012 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book is organized around new experiments in and modeling of fatigue and its effects over a range of composite materials subjected to multiple mechanical and thermal stresses. An objective of the investigations discussed is to explain failure mechanisms and improve long-term loading prediction and performance.
Download or read book Composite Joints and Connections written by P Camanho and published by Elsevier. This book was released on 2011-10-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of composites over metals for structural applications has made a thorough understanding of the behaviour of composite joints in various applications essential for engineers, but has also presented them with a new set of problems. Composite joints and connections addresses these differences and explores the design, modelling and testing of bonded and bolted joints and connections.Part one discusses bolted joints whilst part two examines bonded joints. Chapters review reinforcement techniques and applications for composite bolted and bonded joints and investigate the causes and effects of fatigue and stress on both types of joint in various applications and environments. Topics in part one include metal hybridization, glass-reinforced aluminium (GLARE), hybrid fibre metal laminates (FML), glass fibre reinforced polymer (GFRP) and carbon fibre reinforced polymer (CFRP) composites. Topics in part two include calculation of strain energy release rates, simulating fracture and fatigue failure using cohesive zone models, marine and aerospace applications, advanced modelling, stress analysis of bonded patches and scarf repairs.Composite joints and connections is a valuable reference for composite manufacturers and composite component fabricators, the aerospace, automotive, shipbuilding and civil engineering industries and for anyone involved in the joining and repair of composite structures. - Explores the design, modelling and testing of bonded and bolted joints and connections - Reviews reinforcement techniques and applications for composite bolted and bonded joints - Investigates the causes and effects of fatigue and stress on bolted and bonded joints in various applications and environments
Download or read book Fatigue of Composite Materials written by R Talreja and published by Technomic Publishing Company. This book was released on 1990 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials in Piping Applications written by Dimitrios G. Pavlou and published by DEStech Publications, Inc. This book was released on 2013 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive materials science book on the design, analysis, and performance of composite materials (CM) in oil, gas, water and wastewater pipe applications.
Download or read book Multi Scale Continuum Mechanics Modelling of Fibre Reinforced Polymer Composites written by Wim Van Paepegem and published by Woodhead Publishing. This book was released on 2020-11-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale modelling of composites is a very relevant topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large industrial players such as Siemens (Virtual Material Characterization toolkit and MultiMechanics virtual testing software), MSC/e-Xstream (Digimat software), Simulia (micromechanics plug-in in Abaqus), HyperSizer (Multi-scale design of composites), Altair (Altair Multiscale Designer) This book is intended to be an ideal reference on the latest advances in multi-scale modelling of fibre-reinforced polymer composites, that is accessible for both (young) researchers and end users of modelling software. We target three main groups: This book aims at a complete introduction and overview of the state-of-the-art in multi-scale modelling of composites in three axes: • ranging from prediction of homogenized elastic properties to nonlinear material behaviour • ranging from geometrical models for random packing of unidirectional fibres over meso-scale geometries for textile composites to orientation tensors for short fibre composites • ranging from damage modelling of unidirectionally reinforced composites over textile composites to short fibre-reinforced composites The book covers the three most important scales in multi-scale modelling of composites: (i) micro-scale, (ii) meso-scale and (iii) macro-scale. The nano-scale and related atomistic and molecular modelling approaches are deliberately excluded, since the book wants to focus on continuum mechanics and there are already a lot of dedicated books about polymer nanocomposites. A strong focus is put on physics-based damage modelling, in the sense that the chapters devote attention to modelling the different damage mechanisms (matrix cracking, fibre/matrix debonding, delamination, fibre fracture,...) in such a way that the underlying physics of the initiation and growth of these damage modes is respected. The book also gives room to not only discuss the finite element based approaches for multi-scale modelling, but also much faster methods that are popular in industrial software, such as Mean Field Homogenization methods (based on Mori-Tanaka and Eshelby solutions) and variational methods (shear lag theory and more advanced theories). Since the book targets a wide audience, the focus is put on the most common numerical approaches that are used in multi-scale modelling. Very specialized numerical methods like peridynamics modelling, Material Point Method, eXtended Finite Element Method (XFEM), isogeometric analysis, SPH (Smoothed Particle Hydrodynamics),... are excluded. Outline of the book The book is divided in three large parts, well balanced with each a similar number of chapters:
Download or read book Mechanics of Composite Materials written by Jacob Aboudi and published by Elsevier. This book was released on 2013-10-22 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade the author has been engaged in developing a micromechanical composite model based on the study of interacting periodic cells. In this two-phase model, the inclusion is assumed to occupy a single cell whereas the matrix material occupies several surrounding cells. A prominent feature of the micromechanical method of cells is the transition from a medium, with a periodic microstructure to an equivalent homogeneous continuum which effectively represents the composite material. Of great importance is the significant advantage of the cells model in its capability to analyze elastic as well as nonelastic constituents (e.g. viscoelastic, elastoplastic and nonlinear elastic), thus forming a unified approach in the prediction of the overall behaviour of composite material. This book deals almost exclusively with this unified theory and its various applications.
Download or read book Fatigue Damage written by Christi Lalanne and published by CRC Press. This book was released on 2002-03-29 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Series: This important new series of five volumes has been written with both the professional engineers and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and crucially important areas of mechanical engineering, from both the theoretical and practical standpoints. As all products need to be designed to withstand the environmental conditions to which they are likely to be subjected, prototypes must be verified by calculation and laboratory tests, the latter according to specifications from national or international standards. The concept of tailoring the product to its environment has gradually developed whereby, from the very start of a design project, through the to the standards specifications and testing procedures on th e prototype, the real environment in which the product being tested will be functioning is taken into account. The five volumes of Mechanical Shock and Vibration cover all the issues that need to be addressed in this area of mechanical engineering. The theoretical analyses are placed in the context of the real world and of laboratory tests - essential for the development of specifications. Volume IV: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specifciation representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the hypotheses adopted to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting the response peaks, which are used to establish the histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Acoustic Emission and Durability of Composite Materials written by Nathalie Godin and published by John Wiley & Sons. This book was released on 2018-05-08 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, two kinds of analysis based on acoustic emission recorded during mechanical tests are investigated. In the first, individual, analysis, acoustic signature of each damage mechanism is characterized. So with a clustering method, AE signals that have similar shapes or similar features can be group together into a cluster. Afterwards, each cluster can be linked with a main damage. The second analysis is based on a global AE analysis, on the investigation of liberated energy, with a view to identify a critical point. So beyond this characteristic point, the criticality can be modeled with a power-law in order to evaluate time to failure.
