Download or read book Modeling and Simulation of Knock and Nitric Oxide Emissions in Turbocharged Direct Injection Spark Ignition Engines written by Dirk Linse and published by . This book was released on 2013-11-13 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation of Spark Ignition in Turbocharged Direct Injection Spark Ignition Engines written by Lukas Schäfer and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Characteristics of Turbo Charged DISI engines written by Henrik Hoffmeyer and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of progress in the development of alternative powertrain systems and energy sources, the internal combustion and all its derivates still are and will be the main powertrain for automobiles. In SI-engines, several approaches compete with each other like the controlled auto ignition (CAI or HCCI), throttle-free load control using variable valvetrains, stratified mixture formation with lean engine operation or highly turbo charged downsizing concepts all combined with gasoline direct injection. The presented work makes a contribution for a deeper understanding of the combustion process of a turbo charged direct injection engine operating with external EGR as well as lean stratified mixture. Using detailed test bench investigations and introducing a new optical measurement tool, the combustion process is described in detail focusing on the occurrence of non-premixed combustion phenomena. The influence of engine parameters like global and local air-/fuel ratio, external EGR and fuel rail pressure as well as the influence of fuel parameters are discussed giving a characterization of the combustion process of stratified engine operation. Furthermore, the influences of non-inert exhaust gas components on engine knock tendency are investigated using external EGR with an EGR catalyst. Opposing the results to numerical analysis, combustion characteristics of turbo charged DISI-engines are presented.
Download or read book Modeling of End Gas Autoignition for Knock Prediction in Gasoline Engines written by Andreas Manz and published by Logos Verlag Berlin GmbH. This book was released on 2016-08-18 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downsizing of modern gasoline engines with direct injection is a key concept for achieving future CO22 emission targets. However, high power densities and optimum efficiency are limited by an uncontrolled autoignition of the unburned air-fuel mixture, the so-called spark knock phenomena. By a combination of three-dimensional Computational Fluid Dynamics (3D-CFD) and experiments incorporating optical diagnostics, this work presents an integral approach for predicting combustion and autoignition in Spark Ignition (SI) engines. The turbulent premixed combustion and flame front propagation in 3D-CFD is modeled with the G-equation combustion model, i.e. a laminar flamelet approach, in combination with the level set method. Autoignition in the unburned gas zone is modeled with the Shell model based on reduced chemical reactions using optimized reaction rate coefficients for different octane numbers (ON) as well as engine relevant pressures, temperatures and EGR rates. The basic functionality and sensitivities of improved sub-models, e.g. laminar flame speed, are proven in simplified test cases followed by adequate engine test cases. It is shown that the G-equation combustion model performs well even on unstructured grids with polyhedral cells and coarse grid resolution. The validation of the knock model with respect to temporal and spatial knock onset is done with fiber optical spark plug measurements and statistical evaluation of individual knocking cycles with a frequency based pressure analysis. The results show a good correlation with the Shell autoignition relevant species in the simulation. The combined model approach with G-equation and Shell autoignition in an active formulation enables a realistic representation of thin flame fronts and hence the thermodynamic conditions prior to knocking by taking into account the ignition chemistry in unburned gas, temperature fluctuations and self-acceleration effects due to pre-reactions. By the modeling approach and simulation methodology presented in this work the overall predictive capability for the virtual development of future knockproof SI engines is improved.
Download or read book Highway Safety Literature written by and published by . This book was released on 1973 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Phenomenological Knock Model for the Development of Future Engine Concepts written by Alexander Fandakov and published by Springer. This book was released on 2018-12-28 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of 0D/1D knock models available today are known for their poor accuracy and the great effort needed for their calibration. Alexander Fandakov presents a novel, extensively validated phenomenological knock model for the development of future engine concepts within a 0D/1D simulation environment that has one engine-specific calibration parameter. Benchmarks against the models commonly used in the automotive industry reveal the huge gain in knock boundary prediction accuracy achieved with the approach proposed in this work. Thus, the new knock model contributes substantially to the efficient design of spark ignition engines employing technologies such as full-load exhaust gas recirculation, water injection, variable compression ratio or lean combustion. About the Author Alexander Fandakov holds a PhD in automotive powertrain engineering from the Institute of Internal Combustion Engines and Automotive Engineering (IVK) at the University of Stuttgart, Germany. Currently, he is working as an advanced powertrain development engineer in the automotive industry.
Download or read book Numerical and Experimental Investigation of Knock in Turbocharged Direct Injection Spark Ignition Engines written by Emmeram Meindl and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Internal Combustion Engines written by Richard Stone and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers
Download or read book Transformational Science And Technology For The Current And Future Force With Cd rom Proceedings Of The 24th Us Army Science Conference written by A M Rajendran and published by World Scientific. This book was released on 2006-11-08 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a unique opportunity to understand the basic and applied research and technology areas that support applications to enable Transformational capabilities for US Soldiers. The research papers are in line with the theme of the 24th Army Science Conference: “Transformational Science and Technology for the Current and Future Force,” emphasizing the critical role of Science and Technology in addressing the significant challenges posed by Global War On Terrorism while simultaneously developing Transformational capabilities for the Future Force.
Download or read book Multidimensional Modeling of Combustion and Knock in Spark ignition Engines with Detailed Chemical Kinetics written by Long Liang and published by . This book was released on 2006 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Knocking in Gasoline Engines written by Michael Günther and published by Springer. This book was released on 2017-11-21 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the papers presented at the conference discussing approaches to prevent or reliably control knocking and other irregular combustion events. The majority of today’s highly efficient gasoline engines utilize downsizing. High mean pressures produce increased knocking, which frequently results in a reduction in the compression ratio at high specific powers. Beyond this, the phenomenon of pre-ignition has been linked to the rise in specific power in gasoline engines for many years. Charge-diluted concepts with high compression cause extreme knocking, potentially leading to catastrophic failure. The introduction of RDE legislation this year will further grow the requirements for combustion process development, as residual gas scavenging and enrichment to improve the knock limit will be legally restricted despite no relaxation of the need to reach the main center of heat release as early as possible. New solutions in thermodynamics and control engineering are urgently needed to further increase the efficiency of gasoline engines.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A STUDY OF MODEL BASED CONTROL STRATEGY FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK IGNITED ENGINE written by and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : To meet increasingly stringent fuel economy and emissions legislation, more advanced technologies have been added to spark-ignition (SI) engines, thus exponentially increase the complexity and calibration work of traditional map-based engine control. To achieve better engine performance without introducing significant calibration efforts and make the developed control system easily adapt to future engines upgrades and designs, this research proposes a model-based optimal control system for cycle-by-cycle Gasoline Turbocharged Direct Injection (GTDI) SI engine control, which aims to deliver the requested torque output and operate the engine to achieve the best achievable fuel economy and minimum emission under wide range of engine operating conditions. This research develops a model-based ignition timing prediction strategy for combustion phasing (crank angle of fifty percent of the fuel burned, CA50) control. A control-oriented combustion model is developed to predict burn duration from ignition timing to CA50. Using the predicted burn duration, the ignition timing needed for the upcoming cycle to track optimal target CA50 is calculated by a dynamic ignition timing prediction algorithm. A Recursive-Least-Square (RLS) with Variable Forgetting Factor (VFF) based adaptation algorithm is proposed to handle operating-point-dependent model errors caused by inherent errors resulting from modeling assumptions and limited calibration points, which helps to ensure the proper performance of model-based ignition timing prediction strategy throughout the entire engine lifetime. Using the adaptive combustion model, an Adaptive Extended Kalman Filter (AEKF) based CA50 observer is developed to provide filtered CA50 estimation from cyclic variations for the closed-loop combustion phasing control. An economic nonlinear model predictive controller (E-NMPC) based GTDI SI engine control system is developed to simultaneously achieve three objectives: tracking the requested net indicated mean effective pressure (IMEPn), minimizing the SFC, and reducing NOx emissions. The developed E-NMPC engine control system can achieve the above objectives by controlling throttle position, IVC timing, CA50, exhaust valve opening (EVO) timing, and wastegate position at the same time without violating engine operating constraints. A control-oriented engine model is developed and integrated into the E-NMPC to predict future engine behaviors. A high-fidelity 1-D GT-POWER engine model is developed and used as the plant model to tune and validate the developed control system. The performance of the entire model-based engine control system is examined through the software-in-the-loop (SIL) simulation using on-road vehicle test data.
Download or read book MODEL BASED ENGINE OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED written by and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : The in-cylinder trapped air, residual gas, and temperature are important dynamic parameters in Gasoline Direct Injection (GDI) Spark Ignition (SI) engines for fuel and combustion control. However, their real-time prediction for transient engine operations is complicated, especially when concerning variable valve timing. A dynamic cycle-by-cycle control-oriented discrete nonlinear model is proposed and developed in this thesis to estimate the in-cylinder mixture temperature and the mass of trapped air, and residual gas at the point of Intake Valve Closing (IVC). The developed model uses in-cylinder, intake, and exhaust pressures as the primary inputs. The exhaust gas backflow into the cylinder is estimated using a compressible ideal gas model that is designed for engines equipped with Variable Valve Timing (VVT). The designed model is integrated into a rapid-prototype control system for real-time operation. The model's dynamic behavior is validated using an engine dynamometer transient test cycle under real-time conditions. The cold crank-start phase significantly contributes to total engine-out emissions during the US Federal Test Procedure (FTP). The first three engine cycles of the cold crank-start for a Gasoline Direct Injection (GDI) engine in Hybrid Electric Vehicle (HEV) elevated cranking speed is investigated at 20°C. To this end, the impact of the operating strategy on the individual-cylinder engine-out emissions is analyzed quantitatively. For this purpose, a new dynamic method was developed to translate the engine-out emissions concentration measured at the exhaust manifold outlet to mass per cycle per cylinder. The HEV elevated cranking speed provides valve timing control, throttling, and increased fuel injection pressure from the first firings. This study concentrates on analyzing the cranking speed, spark timing, valve timing, and fuel injection strategy, and parameter effects on engine-out emissions. Design of Experiment (DOE) method is used to create a two-step multi-level fractional-factorial test plan with a minimum number of test points to evaluate the significant parameters affecting engine-out emissions during cold crank-start. The split injection parameters, including the Start of the first Injection (SOI), End of the second injection (EOI), and split ratio, in addition to the first cycle additive fuel factor, are investigated. Results show that using the high cranking speed with stabilized low intake Manifold Absolute Pressure (MAP), highly-retarded spark timing, high valve overlap, late intake first injection, 30 CAD bTDC firing EOI, and low first cycle fuel factor reduces the average first three cycles HC emission by 94\%.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1998 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimentally Determined Temporally Based Study of Turbo charged Diesel Nitric Oxide Emissions written by Ronald J. Donahue and published by . This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phenomenological Modelling of Particulate Emissions in Direct Injection Spark Ignition Engines for Driving Cycle Simulations written by Stefan Frommater and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: