Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-08-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book Defense Modeling Simulation and Analysis written by National Research Council and published by National Academies Press. This book was released on 2006-09-22 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, simulation, and analysis (MS&A) is a crucial tool for military affairs. MS&A is one of the announced pillars of a strategy for transforming the U.S. military. Yet changes in the enterprise of MS&A have not kept pace with the new demands arising from rapid changes in DOD processes and missions or with the rapid changes in the technology available to meet those demands. To help address those concerns, DOD asked the NRC to identify shortcomings in current practice of MS&A and suggest where and how they should be resolved. This report provides an assessment of the changing mission of DOD and environment in which it must operate, an identification of high-level opportunities for MS&A research to address the expanded mission, approaches for improving the interface between MS&A practitioners and decision makers, a discussion of training and continuing education of MS&A practitioners, and an examination of the need for coordinated military science research to support MS&A.
Download or read book Retooling Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2004-09-30 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Department of Defense continues development of the future warrior system, the difficulty of moving rapidly from design to manufacturing for complex technologies is becoming a major concern. In particular, there are communication gaps between design and manufacturing that hinder rapid development of new products important for these future military developments. To help address those concerns, DOD asked the NRC to develop a framework for "bridging" these gaps through data management, modeling, and simulation. This report presents the results of this study. It provides a framework for virtual design and manufacturing and an assessment of the necessary tools; an analysis of the economic dimensions; an examination of barriers to virtual design and manufacturing in the DOD acquisition process; and a series of recommendations and research needs.
Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.
Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1998-05-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For every weapons system being developed, the U.S. Department of Defense (DOD) must make a critical decision: Should the system go forward to full-scale production? The answer to that question may involve not only tens of billions of dollars but also the nation's security and military capabilities. In the milestone process used by DOD to answer the basic acquisition question, one component near the end of the process is operational testing, to determine if a system meets the requirements for effectiveness and suitability in realistic battlefield settings. Problems discovered at this stage can cause significant production delays and can necessitate costly system redesign. This book examines the milestone process, as well as the DOD's entire approach to testing and evaluating defense systems. It brings to the topic of defense acquisition the application of scientific statistical principles and practices.
Download or read book Intelligent Systems in Operations Methods Models and Applications in the Supply Chain written by Nag, Barin and published by IGI Global. This book was released on 2010-03-31 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides knowledge and insights on present and future AI applications in Operations Management presenting tools and decisions in terms of theoretical and empirical models, methods and proposed applications"--Provided by publisher.
Download or read book Space Modeling and Simulation written by Larry B. Rainey and published by AIAA. This book was released on 2004 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was sponsored by the U.S. Air Force Academy Space Mission Analysis and Design Program with support from program offices at the Air Force Space and Missile Systems Center, the National Reconnaissance Office, the U.S. Department of Transportation, and organizations within the National Aeronautics and Space Administration.
Download or read book Handbook of Research on Discrete Event Simulation Environments Technologies and Applications written by Abu-Taieh, Evon M. O. and published by IGI Global. This book was released on 2009-10-31 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a comprehensive overview of theory and practice in simulation systems focusing on major breakthroughs within the technological arena, with particular concentration on the accelerating principles, concepts and applications"--Provided by publisher.
Download or read book Hearings on National Defense Authorization Act for Fiscal Year 1995 S 2182 H R 4301 and Oversight of Previously Authorized Programs Before the Committee on Armed Services House of Representatives One Hundred Third Congress Second Session written by United States. Congress. House. Committee on Armed Services. Military Acquisition Subcommittee and published by . This book was released on 1994 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2004 Summer Computer Simulation Conference SCSC 2004 written by Society for Computer Simulation and published by . This book was released on 2004 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-02-14 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.
Download or read book PM Program Manager Online January February 2003 Issue written by and published by DIANE Publishing. This book was released on with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Collection Laboratory Theater written by Helmar Schramm and published by Walter de Gruyter. This book was released on 2008-08-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume launches a new, eight-volume series entitled Theatrum Scientiarum on the history of science and the media which has arisen from the work of the Berlin special research project on "Performative Cultures" under the aegis of the Theatre Studies Department of the Free University. The volume examines the role of space in the constitution of knowledge in the early modern age. "Kunstkammern" (art and curiosities cabinets), laboratories and stages arose in the 17th century as instruments of research and representation. There is, however, still a lack of precise descriptions of the epistemic contribution made by material and immaterial space in the performance of knowledge. Therefore, the authors present a novel view of the conditions surrounding the creation of these spatial forms. Account is taken both of the institutional framework of these spaces and their placement within the history of ideas, the architectural models and the modular differentiations, and the scientific consequences of particular design decisions. Manifold paths are followed between the location of the observer in the representational space of science and the organization in time and space of sight, speech and action in the canon of European theatrical forms. Not only is an account given of the mutual architectural and intellectual influence of the spaces of knowledge and the performance spaces of art; they are also analyzed to ascertain what was possible in them and through them. This volume is the English translation of Kunstkammer, Laboratorium, Bühne (de Gruyter, Berlin, 2003).
Download or read book Manufacturing Technology Program written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1993-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with the MANTECH project of the Air Force. Describes the program's successes, current initiatives, & future directions.
Download or read book Army RD A Bulletin written by and published by . This book was released on 1999-05 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pre Milestone A and Early Phase Systems Engineering written by National Research Council and published by National Academies Press. This book was released on 2008-02-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of U.S. military forces to field new weapons systems quickly and to contain their cost growth has declined significantly over the past few decades. There are many causes including increased complexity, funding instability, bureaucracy, and more diverse user demands, but a view that is gaining more acceptance is that better systems engineering (SE) could help shorten development time. To investigate this assertion in more detail, the US Air Force asked the NRC to examine the role that SE can play during the acquisition life cycle to address root causes of program failure especially during pre-milestone A and early program phases. This book presents an assessment of the relationship between SE and program outcome; an examination of the SE workforce; and an analysis of SE functions and guidelines. The latter includes a definition of the minimum set of SE processes that need to be accounted for during project development.
