Download or read book Modeling and Design of Perforated Prosthetic Sockets ARCHM to Increase Heat Transfer of Residual Limbs written by Luis Carbajal and published by . This book was released on 2015 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat build-up in prosthetic sockets is a significant problem experienced by many amputees in America, with no central solution in sight. Heat and discomfort accounts for over 70% of problems experienced by lower limb amputees in America. Although there have been advances in prosthetics in the active-power knees and ankles, not even cybernetics can improve the comfort of the prosthesis if there is still a socket. The materials in prosthetic sockets are not conductive enough to relieve the heat inside of the socket. The purpose of this study is to model the temperature variance and heat transfer of an amputee's residual limb and design ways to improve current prosthetic socket technologies. With the addition of small holes, or perforations, in the socket, there will be an increase in the heat transfer by convection, while still maintaining the strength of a carbon fiber prosthesis. Through the use of discrete approximation modeling, the transient temperature inside of the socket layers can be identified and improved through design patterns cut into the socket. Increased heat transfer can be observed as the perforations in the socket become larger, although the larger the holes, the larger the stresses are in the prosthesis. Non-intrusive designs were developed for sockets before and after they are made to increase convection surface area. More modeling needs to be done in 3-dimensional polar coordinates.
Download or read book Computer Modelling of the Residual Limb for the Development of Prosthetic Sockets and Liners with the Cellular Structure written by Vasja Plesec and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of lower limb prostheses continues to rely primarily on manual methods, which are outdated and characterized by labour-intensive processes, lengthy time requirements, high costs, and a heavy reliance on the expertise of prosthetists. Achieving a satisfactory fit between the residual limb and socket remains a challenge, often leading to discomfort, pain, and potential wearer tissue damage. However, advancements in computer technology and numerical simulation offer an opportunity to predict stresses and strains experienced by the residual limb during prosthesis usage. This, in turn, aids in the development process by enhancing the design of the prosthetic socket and liner through virtual environments. In this dissertation we developed a generic numerical transtibial model to bridge the gap between clinical practice and numerical simulations. Biomechanically validated, this model generates outcomes applicable to a broader amputee population, facilitating comparative analysis of socket and liner designs and materials under different loading conditions. Furthermore, the dissertation explores the utilization of a 3D-printed socket manufactured through the cost-effective fused filament fabrication process, using polylactic acid filament, aiming to reduce the costs and establish a streamlined production process. The 3D-printed socket was evaluated within the virtual environment using the developed transtibial model. The numerical findings indicate that the 3D-printed socket can effectively withstand the loads encountered during the stages of prosthesis donning, single-leg stance, heel strike, and push-off, thereby presenting a viable alternative to the prevalent composite socket. Additionally, a cellular structure composed of a flexible thermoplastic elastomeric material is proposed as a prosthetic liner to enhance comfort by reducing contact pressure while maintaining the required stability. Numerical results indicate that by manipulating cellular parameters such as unit cell type and relative density of the structure, a customized response can be achieved. This customized response effectively reduces contact pressure for a given scenario without increasing displacement, thereby improving comfort while maintaining stability.
Download or read book The Glossary of Prosthodontic Terms written by and published by . This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Biocomposites written by Mohammad Jawaid and published by Springer. This book was released on 2017-02-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept, design and application of green biocomposites, with a specific focus on the current demand for green biocomposites for automotive and aerospace components. It discusses the mathematical background, innovative approaches to physical modelling, analysis and design techniques. Including numerous illustrations, tables, case studies and exercises, the text summarises current research in the field. It is a valuable reference resource for researchers, students and scientists working in the field of materials science.
Download or read book Abnormal postural reflex activity caused by brain lesions written by Berta Bobath and published by . This book was released on 1965 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Promise of Assistive Technology to Enhance Activity and Work Participation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-09-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Census Bureau has reported that 56.7 million Americans had some type of disability in 2010, which represents 18.7 percent of the civilian noninstitutionalized population included in the 2010 Survey of Income and Program Participation. The U.S. Social Security Administration (SSA) provides disability benefits through the Social Security Disability Insurance (SSDI) program and the Supplemental Security Income (SSI) program. As of December 2015, approximately 11 million individuals were SSDI beneficiaries, and about 8 million were SSI beneficiaries. SSA currently considers assistive devices in the nonmedical and medical areas of its program guidelines. During determinations of substantial gainful activity and income eligibility for SSI benefits, the reasonable cost of items, devices, or services applicants need to enable them to work with their impairment is subtracted from eligible earnings, even if those items or services are used for activities of daily living in addition to work. In addition, SSA considers assistive devices in its medical disability determination process and assessment of work capacity. The Promise of Assistive Technology to Enhance Activity and Work Participation provides an analysis of selected assistive products and technologies, including wheeled and seated mobility devices, upper-extremity prostheses, and products and technologies selected by the committee that pertain to hearing and to communication and speech in adults.
Download or read book Learning to Think Spatially written by National Research Council and published by National Academies Press. This book was released on 2005-02-03 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to Think Spatially examines how spatial thinking might be incorporated into existing standards-based instruction across the school curriculum. Spatial thinking must be recognized as a fundamental part of Kâ€"12 education and as an integrator and a facilitator for problem solving across the curriculum. With advances in computing technologies and the increasing availability of geospatial data, spatial thinking will play a significant role in the information-based economy of the twenty-first century. Using appropriately designed support systems tailored to the Kâ€"12 context, spatial thinking can be taught formally to all students. A geographic information system (GIS) offers one example of a high-technology support system that can enable students and teachers to practice and apply spatial thinking in many areas of the curriculum.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Textbook of Plastic and Reconstructive Surgery written by Deepak K. Kalaskar and published by UCL Press. This book was released on 2016-08-02 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts from London’s renowned Royal Free Hospital, Textbook of Plastic and Reconstructive Surgery offers a comprehensive overview of the vast topic of reconstructive plastic surgery and its various subspecialties for introductory plastic surgery and surgical science courses. The book comprises five sections covering the fundamental principles of plastic surgery, cancer, burns and trauma, paediatric plastic surgery and aesthetic surgery, and covers the breadth of knowledge that students need to further their career in this exciting field. Additional coverage of areas in which reconstructive surgery techniques are called upon includes abdominal wall reconstruction, ear reconstruction and genital reconstruction. A chapter on aesthetic surgery includes facial aesthetic surgery and blepharoplasty, aesthetic breast surgery, body contouring and the evolution of hair transplantation.The broad scope of this volume and attention to often neglected specialisms such as military plastic surgery make this a unique contribution to the field. Heavily illustrated throughout, Textbook of Plastic and Reconstructive Surgery is essential reading for anyone interested in furthering their knowledge of this exciting field. This book was produced as part of JISC's Institution as e-Textbook Publisher project. Find out more at https://www.jisc.ac.uk/rd/projects/institution-as-e-textbook-publisher
Download or read book The Patellar Tendon Bearing Below Knee Prosthesis written by C. W. Radcliffe and published by . This book was released on 1961 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lower limb Prosthetics written by Norman Berger and published by . This book was released on 1997 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2011-12-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.
Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.
Download or read book Psychoprosthetics written by Pamela Gallagher and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Psychoprosthetics is defined as the study of psychological aspects of prosthetic use and of rehabilitative processes in those conditions that require the use of prosthetic devices. Psychoprosthetics: State of the Knowledge brings together, into one easily accessible volume, the most recent and exciting research and knowledge in this new field
Download or read book Guidelines for Perinatal Care written by American Academy of Pediatrics and published by . This book was released on 1997 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide has been developed jointly by the American Academy of Pediatrics and the American College of Obstetricians and Gynecologists, and is designed for use by all personnel involved in the care of pregnant women, their foetuses, and their neonates.
Download or read book Prosthetic Treatment of the Edentulous Patient written by R. M. Basker and published by John Wiley & Sons. This book was released on 2009-02-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of improvements in oral health, there will always be a significant number of people who lose all their teeth. Furthermore, as people are living longer, complete denture work has become more challenging and managing the transition from a pre-edentulous to an edentulous condition has become more critical. The fourth edition of this established textbook for dental undergraduates and postgraduates has been completely updated to reflect these changes. More emphasis has been placed on care of the elderly and how to achieve better communication between clinicians and dental technicians. More details of clinical techniques have been included, with a new section on the self assessment of clinical work. The text has been completely revised to take into account the results of research over the last ten years.
Download or read book Ergonomics in Sport and Physical Activity written by Thomas Reilly and published by Human Kinetics. This book was released on 2009-09-22 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics in Sport and Physical Activity: Enhancing Performance and Improving Safety is also available as an e-book. The e-book is available at a reduced price and allows readers to highlight and take notes throughout the text. When purchased through the Human Kinetics site, access to the e-book is immediately granted when the order is received.Ergonomics in Sport and Physical Activity: Enhancing Performance and Improving Safety is the first text to provide an in-depth discussion of how the principles of ergonomics can be applied in the context of sport and other physical activities to reduce injury and improve performance. The textblends concepts from biomechanics, physiology, and psychology as it shows how ergonomics is applied to physical activity. This comprehensive text outlines methods for assessing risk in and procedures for dealing with stress, eliminating hazards, and evaluating challenges posed in specific work or sport environments. It discusses issues such as the design of effective equipment, clothing, and playing surfaces; methods of assessing risk in situations; and staying within appropriate training levels to reduce fatigue and avoid overtraining. The text not only examines sport ergonomics but also discusses ergonomic considerations for physically active special populations. Ergonomics in Sport and Physical Activity explains what ergonomics is, how ergonomists solve practical problems in the workplace, and how principles of ergonomics are applied in the context of sport and other physical activities when solving practical problems related to human characteristics and capabilities. The text shows readers how to improve performance, achieve optimal efficiency, enhance comfort, and reduce injuries by exploring topics such as these: Essential concepts, terms, and principles of ergonomics and how these relate to physical activity Physical properties of the body and the factors limiting performance Interactions between the individual, the task, and the environment Injury risk factors in relation to body mechanics in various physical activities Injury prevention and individual protection in the review of sports equipment and sports environments Comfort, efficiency, safety, and details of systems criteria in equipment design This research-based text uses numerous practical examples, figures, charts, and graphs to bring the material to life. In addition, descriptions of technological advances show where we have been and how technology has advanced the field. Through the book’s discussion of the various stressors and adaptive mechanisms, readers will learn how to cope with various environmental conditions. They will also learn how various training modes can be used to alter sport-specific capabilities and enhance performance. Presenting a wide range of approaches, theoretical models, and analytical techniques, Ergonomics in Sport and Physical Activity: Enhancing Performance and Improving Safety illustrates the potential for ergonomics to be extended across recreation, competitive sport, and physically active work environments. Bridging the gap between ergonomics and exercise science, this unique text will assist both health care and exercise professionals in developing an improved awareness of how human capabilities are best matched to physical activities.
