Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.
Download or read book IUTAM Symposium on Elastohydrodynamics and Micro elastohydrodynamics written by R.W. Snidle and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.
Download or read book Journal of Tribology written by and published by . This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 1998 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper written by and published by . This book was released on 1998 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference on Advances in Tribology and Engineering Systems written by Himanshu C. Patel and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains advanced-level research material in the area of lubrication theory and related aspects, presented by eminent researchers during the International Conference on Advances in Tribology and Engineering Systems (ICATES 2013) held at Gujarat Technological University, Ahmedabad, India during October 15–17, 2013. The material in this book represents the advanced field of tribology and reflects the work of many eminent researchers from both India and abroad. The treatment of the presentations is the result of the contributions of several professionals working in the industry and academia. This book will be useful for students, researchers, academicians, and professionals working in the area of tribology, in general, and bearing performance characteristics, in particular, especially from the point-of-view of design. This book will also appeal to researchers and professionals working in fluid-film lubrication and other practical applications of tribology. A wide range of topics has been included despite space and time constraints. Basic concepts and fundamentals techniques have been emphasized upon, while also including highly specialized topics and methods (such as nanotribology, bio-nanotribology). Care has been taken to generate interest for a wide range of readers, considering the interdisciplinary nature of the subject.
Download or read book Elastohydrodynamics written by Ramsey Gohar and published by . This book was released on 1988 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Recent Developments in Intelligent Computing Communication and Devices written by C. H. WU and published by Springer. This book was released on 2020-11-18 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at the 5th International Conference on Intelligent Computing, Communication & Devices (ICCD 2019), held in Xi'an, China on November 22–24, 2019. The contributions focus on emergent fields of intelligent computing and the development of a new generation of intelligent systems. Further, they discuss virtually all dimensions of the intelligent sciences, including intelligent computing, intelligent communication and intelligent devices.
Download or read book Interfacial Mechanics written by Jane Wang and published by CRC Press. This book was released on 2019-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the characteristics of material contact and lubrication at tribological interfaces is of great importance to engineering researchers and machine designers. Traditionally, contact and lubrication are separately studied due to technical difficulties, although they often coexist in reality and they are actually on the same physical ground. Fast research advancements in recent years have enabled the development and application of unified models and numerical approaches to simulate contact and lubrication, merging their studies into the domain of Interfacial Mechanics. This book provides updated information based on recent research progresses in related areas, which includes new concepts, theories, methods, and results for contact and lubrication problems involving elastic or inelastic materials, homogeneous or inhomogeneous contacting bodies, using stochastic or deterministic models for dealing with rough surfaces. It also contains unified models and numerical methods for mixed lubrication studies, analyses of interfacial frictional and thermal behaviors, as well as theories for studying the effects of multiple fields on interfacial characteristics. The book intends to reflect the recent trends of research by focusing on numerical simulation and problem solving techniques for practical interfaces of engineered surfaces and materials. This book is written primarily for graduate and senior undergraduate students, engineers, and researchers in the fields of tribology, lubrication, surface engineering, materials science and engineering, and mechanical engineering.
Download or read book Contact Dynamics in the Field of Elastohydrodynamic Lubrication written by Ysbrand Hans Wijnant and published by . This book was released on 1998 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ball Bearing Lubrication written by Bernard J. Hamrock and published by John Wiley & Sons. This book was released on 1981 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.
Download or read book An efficient solution procedure for elastohydrodynamic contact problems considering structural dynamics written by Schmidt, Jan Henrik and published by KIT Scientific Publishing. This book was released on 2019-01-14 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents an efficient solution procedure for the elastohydrodynamic (EHD) contact problem considering structural dynamics. The contact bodies are modeled using reduced finite element models. Singly diagonal implicit Runge-Kutta (SDIRK) methods are used for adaptive time integration. The structural model is coupled with the nonlinear Reynolds Equation using a monolithic coupling approach. Finally, a reduced order model of the complete nonlinear coupled problem is constructed.
Download or read book Engineering Rheology written by Roger I. Tanner and published by OUP Oxford. This book was released on 2000-03-02 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sets out to provide a guide, with examples, for those who wish to make predictions about the mechanical and thermal behaviour of non-Newtonian materials in engineering and processing technology. After an introductory survey of the field and a review of basic continuum mechanics, the radical differences between elongational and shear behaviour are shown. Two chapters, one based on a continuum approach and the other using microstructural approaches, lead to useful mathematical desriptions of materials for engineering applications. As examples of nearly-viscometric and nearly-elongational flows, there is a discussion of lubrication and related shearing flows, and fibre- spinning and film-blowing respectively. A long chapter is devoted to the important new field of computational rheology, and this is followed by chapters on stability and turbulence and the all-important temperature effects in flow. This new edition contains much new material not available in book form elsewhere-for example wall slip, suspension rheology, computational rheology and new results in stability theory.
Download or read book Elastohydrodynamics 96 written by C. Taylor and published by Elsevier. This book was released on 1997-07-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the latest issue of a collection of Proceedings each dealing with a different topic in Tribology. This volume contains the Proceedings from the 23rd Leeds-Lyon Symposium which addressed the topic of Elastohydrodynamics and was attended by many international experts in the field.The Keynote Address was presented by Professor Stathis Ioannides on the subject of "Tribology in Rolling Element Bearings" and was followed by fifteen other sessions covering a wide variety of general areas from "Experimental" to "Lubricant Properties". In addition, nine other invited technical papers were presented to support the sessions.
