Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).

Download or read book Simulation in Computer Network Design and Modeling Use and Analysis written by Al-Bahadili, Hussein and published by IGI Global. This book was released on 2012-02-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book reviews methodologies in computer network simulation and modeling, illustrates the benefits of simulation in computer networks design, modeling, and analysis, and identifies the main issues that face efficient and effective computer network simulation"--Provided by publisher.

Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1998-05-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For every weapons system being developed, the U.S. Department of Defense (DOD) must make a critical decision: Should the system go forward to full-scale production? The answer to that question may involve not only tens of billions of dollars but also the nation's security and military capabilities. In the milestone process used by DOD to answer the basic acquisition question, one component near the end of the process is operational testing, to determine if a system meets the requirements for effectiveness and suitability in realistic battlefield settings. Problems discovered at this stage can cause significant production delays and can necessitate costly system redesign. This book examines the milestone process, as well as the DOD's entire approach to testing and evaluating defense systems. It brings to the topic of defense acquisition the application of scientific statistical principles and practices.

Download or read book Simulation Modeling and Analysis with ARENA written by Tayfur Altiok and published by Elsevier. This book was released on 2010-07-26 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation Modeling and Analysis with Arena is a highly readable textbook which treats the essentials of the Monte Carlo discrete-event simulation methodology, and does so in the context of a popular Arena simulation environment. It treats simulation modeling as an in-vitro laboratory that facilitates the understanding of complex systems and experimentation with what-if scenarios in order to estimate their performance metrics. The book contains chapters on the simulation modeling methodology and the underpinnings of discrete-event systems, as well as the relevant underlying probability, statistics, stochastic processes, input analysis, model validation and output analysis. All simulation-related concepts are illustrated in numerous Arena examples, encompassing production lines, manufacturing and inventory systems, transportation systems, and computer information systems in networked settings. - Introduces the concept of discrete event Monte Carlo simulation, the most commonly used methodology for modeling and analysis of complex systems - Covers essential workings of the popular animated simulation language, ARENA, including set-up, design parameters, input data, and output analysis, along with a wide variety of sample model applications from production lines to transportation systems - Reviews elements of statistics, probability, and stochastic processes relevant to simulation modeling

Download or read book Model Design and Simulation Analysis written by Syng Yup Ohn and published by Springer. This book was released on 2016-07-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on Systems Simulation, Asia Simulation 2015, held in Jeju, Korea, in November 2016.The 11 revised full papers presented were carefully reviewed and selected from 126 submissions. The papers are organized in topical sections on model and design; simulation and analysis.

Download or read book Emerging Technologies for Health and Medicine written by Dac-Nhuong Le and published by John Wiley & Sons. This book was released on 2018-10-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Showcases the latest trends in new virtual/augmented reality healthcare and medical applications and provides an overview of the economic, psychological, educational and organizational impacts of these new applications and how we work, teach, learn and provide care. With the current advances in technology innovation, the field of medicine and healthcare is rapidly expanding and, as a result, many different areas of human health diagnostics, treatment and care are emerging. Wireless technology is getting faster and 5G mobile technology allows the Internet of Medical Things (IoMT) to greatly improve patient care and more effectively prevent illness from developing. This book provides an overview and review of the current and anticipated changes in medicine and healthcare due to new technologies and faster communication between users and devices. The groundbreaking book presents state-of-the-art chapters on many subjects including: A review of the implications of Virtual Reality (VR) and Augmented Reality (AR) healthcare applications A review of current augmenting dental care An overview of typical human-computer interaction (HCI) that can help inform the development of user interface designs and novel ways to evaluate human behavior to responses in VR and other new technologies A review of telemedicine technologies Building empathy in young children using augmented reality AI technologies for mobile health of stroke monitoring & rehabilitation robotics control Mobile doctor brain AI App An artificial intelligence mobile cloud computing tool Development of a robotic teaching aid for disabled children Training system design of lower limb rehabilitation robot based on virtual reality

Download or read book Introduction to Transportation Analysis Modeling and Simulation written by Dietmar P.F. Möller and published by Springer. This book was released on 2014-10-13 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook/reference provides an in-depth overview of the key aspects of transportation analysis, with an emphasis on modeling real transportation systems and executing the models. Topics and features: presents comprehensive review questions at the end of each chapter, together with detailed case studies, useful links, references and suggestions for further reading; supplies a variety of teaching support materials at the book’s webpage on Springer.com, including a complete set of lecture slides; examines the classification of models used for multimodal transportation systems, and reviews the models and evaluation methods used in transportation planning; explains traffic assignment to road networks, and describes computer simulation integration platforms and their use in the transportation systems sector; provides an overview of transportation simulation tools, and discusses the critical issues in the design, development and use of the simulation models.

Download or read book System Dynamics written by Juan Martín García and published by . This book was released on 2020-05-28 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book allows the reader to acquire step-by-step in a time-efficient and uncomplicated the knowledge in the formation and construction of dynamic models using Vensim. Many times, the models are performed with minimal current data and very few historical data, the simulation models that the student will design in this course accommodate these analyses, with the construction of realistic hypotheses and elaborate behavior models. That's done with the help of software Vensim that helps the construction of the models as well as performing model simulations. At the end of the book, the reader is able to: - Describe the components of a complex system. - Diagnose the natural evolution of the system under analysis. - Create a model of the system and present it using the simulation software. - Carry out simulations with the model, in order to predict the behavior of the system. Content Environmental Area 1. Population Growth 2. Ecology of a Natural Reserve 3. Effects of the Intensive Farming 4. The Fishery of Shrimp 5. Rabbits and Foxes 6. A Study of Hogs 7. Ingestion of Toxins 8. The Barays of Angkor 9. The Golden Number Management Area 10. Production and Inventory 11. CO2 Emissions 12. How to Work More and Better 13. Faults 14. Project Dynamics 15. Innovatory Companies 16. Quality Control 17. The impact of a Business Plan Social Area 18. Filling a Glass 19. A Catastrophe Study 20. The Young Ambitious Worker 21. Development of an Epidemic 22. The Dynamics of Two Clocks Mechanical Area 23. The Tank 24. Study of the Oscillatory Movements 25. Design of a Chemical Reactor 26. The Butterfly Effect 27. The Mysterious Lamp Advanced Exercises (Vensim PLE PLUS) 28. Import data from an Excel file 29. Building Games and Learning Labs 30. Interactive models 31. Input Output Controls 32. Sensitivity Analysis Annex I. Guide to creating a model II. Functions, Tables and Delays III. Frequently Asked Questions FAQs IV. Download the models of this book The author Juan Martín García is teacher and a worldwide recognized expert in System Dynamics, with more than twenty years of experience in this field. Ph.D. Industrial Engineer (Spain) and Postgraduated Diploma in Business Dynamics at Massachusetts Institute of Technology MIT (USA). He teaches Vensim online courses in http://vensim.com/vensim-online-courses/ based on System Dynamics.

Download or read book Modeling and Simulation of Computer Networks and Systems written by Faouzi Zarai and published by Morgan Kaufmann. This book was released on 2015-04-21 with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of Computer Networks and Systems: Methodologies and Applications introduces you to a broad array of modeling and simulation issues related to computer networks and systems. It focuses on the theories, tools, applications and uses of modeling and simulation in order to effectively optimize networks. It describes methodologies for modeling and simulation of new generations of wireless and mobiles networks and cloud and grid computing systems. Drawing upon years of practical experience and using numerous examples and illustrative applications recognized experts in both academia and industry, discuss: - Important and emerging topics in computer networks and systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks - Methodologies, strategies and tools, and strategies needed to build computer networks and systems modeling and simulation from the bottom up - Different network performance metrics including, mobility, congestion, quality of service, security and more... Modeling and Simulation of Computer Networks and Systems is a must have resource for network architects, engineers and researchers who want to gain insight into optimizing network performance through the use of modeling and simulation. - Discusses important and emerging topics in computer networks and Systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks - Provides the necessary methodologies, strategies and tools needed to build computer networks and systems modeling and simulation from the bottom up - Includes comprehensive review and evaluation of simulation tools and methodologies and different network performance metrics including mobility, congestion, quality of service, security and more

Download or read book Research Challenges in Modeling and Simulation for Engineering Complex Systems written by Richard Fujimoto and published by Springer. This book was released on 2017-08-18 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illuminating text/reference presents a review of the key aspects of the modeling and simulation (M&S) life cycle, and examines the challenges of M&S in different application areas. The authoritative work offers valuable perspectives on the future of research in M&S, and its role in engineering complex systems. Topics and features: reviews the challenges of M&S for urban infrastructure, healthcare delivery, automated vehicle manufacturing, deep space missions, and acquisitions enterprise; outlines research issues relating to conceptual modeling, covering the development of explicit and unambiguous models, communication and decision-making, and architecture and services; considers key computational challenges in the execution of simulation models, in order to best exploit emerging computing platforms and technologies; examines efforts to understand and manage uncertainty inherent in M&S processes, and how these can be unified under a consistent theoretical and philosophical foundation; discusses the reuse of models and simulations to accelerate the simulation model development process. This thought-provoking volume offers important insights for all researchers involved in modeling and simulation across the full spectrum of disciplines and applications, defining a common research agenda to support the entire M&S research community.

Download or read book Process Control written by B. Wayne Bequette and published by Prentice Hall Professional. This book was released on 2003 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master process control hands on, through practical examples and MATLAB(R) simulations This is the first complete introduction to process control that fully integrates software tools--enabling professionals and students to master critical techniques hands on, through computer simulations based on the popular MATLAB environment. Process Control: Modeling, Design, and Simulation teaches the field's most important techniques, behaviors, and control problems through practical examples, supplemented by extensive exercises--with detailed derivations, relevant software files, and additional techniques available on a companion Web site. Coverage includes: Fundamentals of process control and instrumentation, including objectives, variables, and block diagrams Methodologies for developing dynamic models of chemical processes Dynamic behavior of linear systems: state space models, transfer function-based models, and more Feedback control; proportional, integral, and derivative (PID) controllers; and closed-loop stability analysis Frequency response analysis techniques for evaluating the robustness of control systems Improving control loop performance: internal model control (IMC), automatic tuning, gain scheduling, and enhancements to improve disturbance rejection Split-range, selective, and override strategies for switching among inputs or outputs Control loop interactions and multivariable controllers An introduction to model predictive control (MPC) Bequette walks step by step through the development of control instrumentation diagrams for an entire chemical process, reviewing common control strategies for individual unit operations, then discussing strategies for integrated systems. The book also includes 16 learning modules demonstrating how to use MATLAB and SIMULINK to solve several key control problems, ranging from robustness analyses to biochemical reactors, biomedical problems to multivariable control.

Download or read book System Design Modeling and Simulation written by Claudius Ptolemaeus and published by Lee & Seshia. This book was released on 2013-09-27 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive introduction to models of computation for the design of complex, heterogeneous systems. It has a particular focus on cyber-physical systems, which integrate computing, networking, and physical dynamics. The book captures more than twenty years of experience in the Ptolemy Project at UC Berkeley, which pioneered many design, modeling, and simulation techniques that are now in widespread use. All of the methods covered in the book are realized in the open source Ptolemy II modeling framework and are available for experimentation through links provided in the book. The book is suitable for engineers, scientists, researchers, and managers who wish to understand the rich possibilities offered by modern modeling techniques. The goal of the book is to equip the reader with a breadth of experience that will help in understanding the role that such techniques can play in design.

Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. - Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism - Provides practical methods to improve credibility of models and manage the model lifecycle - Helps readers gain an overall understanding of model lifecycle management and analysis - Supported by an online ancillary package that includes an instructors and student solutions manual

Download or read book Multiscale Modeling and Analysis for Materials Simulation written by Weizhu Bao and published by World Scientific. This book was released on 2012 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Mathematical Sciences at the National University of Singapore hosted a two-month research program on "Mathematical Theory and Numerical Methods for Computational Materials Simulation and Design" from 1 July to 31 August 2009. As an important part of the program, tutorials and special lectures were given by leading experts in the fields for participating graduate students and junior researchers. This invaluable volume collects four expanded lecture notes with self-contained tutorials. They cover a number of aspects on multiscale modeling, analysis and simulations for problems arising from materials science including some critical components in computational prediction of materials properties such as the multiscale properties of complex materials, properties of defects, interfaces and material microstructures under different conditions, critical issues in developing efficient numerical methods and analytic frameworks for complex and multiscale materials models. This volume serves to inspire graduate students and researchers who choose to embark into original research work in these fields.

Download or read book Simulation Model Design and Execution written by Paul A. Fishwick and published by Pearson Education. This book was released on 1995 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author offers the first text to cover all three areas of simulation-Model Design, Model Execution, and Execution Analysis-in one source. He focuses on model design (using an extension of object- oriented design called multimodeling) and algorithms for serial and parallel model execution. Also covered is the SimPack simulation toolkit, with a full chapter devoted to using SimPack programs.

Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.

Download or read book Modeling and Simulation of Discrete Event Systems written by Byoung Kyu Choi and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling and simulation (M&S) allows engineers to study and analyze complex systems. Discrete-event system (DES)-M&S is used in modern management, industrial engineering, computer science, and the military. As computer speeds and memory capacity increase, so DES-M&S tools become more powerful and more widely used in solving real-life problems. Based on over 20 years of evolution within a classroom environment, as well as on decades-long experience in developing simulation-based solutions for high-tech industries, Modeling and Simulation of Discrete-Event Systems is the only book on DES-M&S in which all the major DES modeling formalisms – activity-based, process-oriented, state-based, and event-based – are covered in a unified manner: A well-defined procedure for building a formal model in the form of event graph, ACD, or state graph Diverse types of modeling templates and examples that can be used as building blocks for a complex, real-life model A systematic, easy-to-follow procedure combined with sample C# codes for developing simulators in various modeling formalisms Simple tutorials as well as sample model files for using popular off-the-shelf simulators such as SIGMA®, ACE®, and Arena® Up-to-date research results as well as research issues and directions in DES-M&S Modeling and Simulation of Discrete-Event Systems is an ideal textbook for undergraduate and graduate students of simulation/industrial engineering and computer science, as well as for simulation practitioners and researchers.